food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
HIGH CAPACITY DICER...
on picture(s) to enlarge!
on picture(s) to enlarge!
Urschel Model 2110 DC dicer is the largest machine in the Diversacut
line, specifically designed to accept large infeed products up to 10
inches long, providing similarly long cuts such as for vegetable
noodles. A versatile, tons-per-hour industrial food process cutting
machine / dicer / slicer / julienne cutter, which uniformly cuts flat
or crinkle cut dices, cubes, strips / strip cuts, french fry cuts,
vegetable noodle cuts, and slices from a wide variety of food products
at high production capacities with speeds dependent on materials,
application and machine configuration. This dicer is designed with
precise cut tolerances with slice adjustment / lock-down features which
allow fine-tuning and ultimate precision.
- Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.
- Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.
Crosscut knife -- change part:
- Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)
Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
"Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).
or crinkle-cut cutting parts can be used in various combinations for
cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or
crinkle-cut french fry strips. Works as a one-dimensional,
two-dimensional or three-dimensional cutter. CALL 315-589-4511 to
discuss YOUR particular food process cutting machine requirements.
rated for up to an input size up to 10 inches (254mm) in any dimension which
reduces need to pre-cut product; --but existing high-output impeller has (8)
paddles on 5.5 inch centers, so practical product input dimensions
would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to
discuss your particular food process cutting machine requirements.
cutter is manufacturer rated for a wide range of fruit, vegetable, and
meat cutting applications, including flat or crinkle cut french fries,
ham, fish, breads, cookie and candy granulations, strawberries,
carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet
potatoes, carrots, plus many more!
of this writing, this Urschel Diversacut 2110 dicer is in stock at
ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic
condition, available for timely shipment.
- Eight (8) paddle impeller for 5 inch maximum product input.
- 5 HP stainless steel shrouded drive motor with variable speed control.
- Factory stainless steel operator control panel with safety interlock system.
- Lube cluster for ease of maintenance.
- All food grade sanitary stainless steel construction including frame, guards, shrouds, infeed hopper and discharge chute.
- 208/230 volt 3 phase electrical input.
CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.
item reference #: Y5082
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.