food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A.
ROLL BRUSH WASHER,
for fruits and vegetables,
on picture(s) to enlarge!
on picture(s) to enlarge!
continuous four roll peeler-washer
which can be fitted with any
combination of brushes and/or abrasive rolls for peeling, brush
washing, scrubbing, or finishing (e.g. in combination with another
peeler or steam peeler) of fruits and vegetables such as potatoes,
beets, carrots, onions, cucumbers, pickles, apples, oranges and others.
Raw product is continuously fed to the peeling chamber and subjected to
the spinning rolls (abrasive and/or brushes as the case may be). It is
important that a sufficient amount of product be kept in the
peeling chamber during operation for best results. Lubricating and
rinsing action is provided in the chamber by overhead sprays, while the
flow of product through the machine is regulated both by a weighted
discharge door, and the inclination of the machine.
As of this writing, ALARD EQUIPMENT has
this model available NEW in stock and available for immediate shipment.
- 15 inch by 27 inch top hopper inlet opening in
the hinged stainless steel cover at 57 inch infeed height.
- Lubricating and rinsing action is provided in the
chamber via a stainless steel water spray pipe header with spray
- Peeled product discharges through a stainless
steel discharge flapper-gate which is adjustable so product can be
subjected to a longer or shorter peeler /washing exposure; --at a 39
inch discharge height.
- Water, peels and debris drop to a full length
stainless steel water catch pan with a 6 inch by 6 inch center bottom
- Capacities run in the ton-per-hour range more or
less, depending on product and application (peeling, washing).
- Shows in pictures with four (4) abrasive rolls,
each 6 inch diameter by 6 foot long; but can be set with any
combination of abrasive or brush rolls to buyer need / specification
for stronger or gentler peeler / scrubbing action.
- The abrasive brush rolls are mounted parallel
(in-line) with product flow.
- Complete with central lubrication cluster for
ease of maintenance.
- Chain / sprocket drive powered by a 3 HP
208/230/460 volt 3 phase 60 cycle constant speed motor.
- We recommend an optional "soft start" variable
speed controller in a gasketed PVC NEMA 4 control box.
CALL 315-589-4511 to confirm
availability and discuss your particular fruit and / or vegetable
peeling and washing equipment needs.
item reference #: Y5325
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.