food processing machinery since 1952, with over six warehouses of used
food processing machinery & equipment IN STOCK!
NY 14589 U.S.A. 315-589-4511(voice)
STAINLESS STEEL FOOD PUMP...
on picture(s) to enlarge!
...a Cornell Model
4NMPP-F5K-SS, stainless steel hydro transport food pump with 4
inlet and outlet connections. The Cornell Hydro-Transport Food Pump is
an excellent foundation for a pipe flume, open flume, wash flume, chill
flume, disinfectant bath, or other water conveyor configuration for
gently conveying high volumes of whole or cut food products in water at
tons-per-hour volume capacities.
Manufacturer rated for:
Approximately 100 to 800 gallons per minute
depending on RPM
and head resistance (pump curves available on request, call
whole or cut food product / solids handling ability for up to 2.94
(74.7mm) in diameter by 4 inches (171.6mm) long.
Designed and manufactured with the sole purpose
food products. Ideal for agricultural applications such as fruit
washing and packing
as well as food manufacturing operations such as whole or cut food
conveying, cooling and / or sanitization in water applications.
"PP" model indicates that this is Cornell's
"expanded volute" model which provides the gentlest product handling in
their line e.g.
for delicate food products.
This offset volute pump is manufacturer
recommended as capable of gently conveying-in-water whole or cut food
products including potatoes, French fries, potato chips, live fish,
cranberries, carrots, apples, cherries, peas, broccoli, crayfish,
shrimp, lettuce, green beans, nuts, peppers, olives, cucumbers,
raisins, beans, corn, peaches, beets, oranges and more (larger products
may require a larger pump;--see size specification of this specific
pump above). Please note we stock several sizes of Cornell food pumps; call 315-589-4511 to discuss your food
product-in-water transport need in detail.
304 stainless steel pump, with 304 stainless
steel single port
impeller for handling whole or precut / processed foods.
304 stainless steel pump backplate, for all food
stainless steel product contacts.
The Cornell food pump has 4 inch flanged suction
discharge outlet connections appropriate for a 4 inch water pipeline.
Cornell's patented "Cycloseal" is included,
replaced mechanical tungsten against silicon seals, with no packing, no
water loss, and reduced pump wear.
This stainless steel hydro transfer food pump is
NEW with a
two-year manufacturer warranty.
Cornell hydro transport food pump is frequently employed to power open
stainless steel flume systems, while others, pump into a closed pipe
flume, which they run in a coil pattern on the ceiling to conserve
space. The flumes provide hold time to remove heat, and extend exposure
water, which usually includes either a sanitizing agent, or a
such as vitamin C; depending on the product. The power of the Cornell
Hydro-Transport pump allows food producers to deliver their now chilled
ingredients to any point in the plant where they want to dry, mix and
pack the final product.
Others use the chill flume for pre-cooling blanched (very lightly
cooked to kill the active enzymes) food products in water prior to
through an IQF freeze tunnel. Others use the flume system just to
in water. In every case, the powerful Cornell pump can gently move high
tons-per-hour output to wherever it needs to go in the plant.
Alard also stocks and handles various kinds of dewatering,
solids-separation, water recovery and filtration equipment to recover
the food product from
the pump water, and to recapture, treat and recirculate the water as
as well as drying and packaging equipment to complete the process; all
to the end-user's specific food product(s) and application. With
range of hydro-transport pump size and material configurations, and
ability to configure and "gear" the pump to the buyer's specific needs,
Cornell Hydro-Transport food pumps are a superb tool for a wide variety
industrial food processing applications.
CALL 315-589-4511 to confirm
current availability, and to discuss your particular food process bulk
product conveying, chilling, cooling, sanitizing and pumping
item reference #: Z4665
Unless otherwise stated, volume, speed,
and/or capacity estimates given are those of the manufacturer(s) of the
equipment. All offers are subject to prior sales and owner's
confirmations. Unless otherwise specified, any prices shown do not
include skidding, crating, or freight.