A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

April 2012 Archives

y1342

y1342g_email.jpgSTAINLESS STEEL DIGITAL METAL DETECTOR with STAINLESS STEEL BELT CONVEYOR with PULLBACK REJECT. 

Goring Kerr model DSP metal detector with 3 inch high by 23
inch wide usable aperture opening in the stainless steel search head enclosure.

The detection head is mounted on a stainless steel thru-conveyor with a 23.75 inch wide by 74 inch long plastic interlocking chain type belt with 1.25 inch high UHMW rails mounted over the belt edges (which is why the usable aperture is narrower than the belt).

The through-conveyor is complete with a pneumatic PULLBACK REJECT SYSTEM with a 7 inch "throw" (the distance the belt pulls back). The conveyor belt runs in a left to right product flow direction (from the perspective of the control panel) at a 35 inch working height, on threaded-rod adjustable feet.

This metal detection system has digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products. 110 volt (standard household current) single phase electrical input for both the detection head and conveyor drive.

In stock in good operable condition, available for timely shipment.

Alard item reference #:1342

y1268

y1268e_email.jpgHI-SPEED Micromate Model MM Stainless Steel BELT TRANSFER CHECKWEIGHER, consisting of a 16" wide by 40" long infeed conveyor, leading to the belt transfer weighcell with dual 7.5" wide by 13" long food grade rubberized belts, which feed to a 16" long by 20" wide interlocking plastic chain type discharge / takeaway belt conveyor running in a left to right product flow direction, with air blast / blow-off reject pushing off to the right. This weight checker is complete with touchpad operator controls on a nice  stainless steel standalone pedestal, with notification lights on top. The conveyor is presently set to run at a 34" working height on threaded rod adjustable feet. Stainless steel construction, with plastic shrouds.

This HiSpeed check-weigher is in stock in EXCELLENT operational, electrical, mec
hanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y1268

y1332

y1332i_email.jpgDIGITAL METAL DETECTOR with STAINLESS STEEL THRU-CONVEYOR, Goring Kerr Model DSP2. 4 3/8 inch high by 14 inch wide usable aperture opening in an epoxy painted aluminum search head enclosure, with digital controls. The detection head is mounted on a 9.75 inch wide by 5 foot long stainless steel conveyor, with plastic interlocking chain typebelt; running in a left to right product flow direction (from the perspective of the control panel position) at a 47 inch working height. This integrated metal detection system features a pneumatic (compressed air) blow-off reject system with an air tank; --with the reject push-off direction to the right. Digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products. Single phase electrical input for both the detection head and conveyor belt drive.
In stock in good / operable condition, available for timely shipment.
Alard item reference: Y1332

y1335

y1335d_email.jpgDIGITAL METAL DETECTOR with STAINLESS STEEL THRU-CONVEYOR, Goring Kerr Model DSP2. 4 7/8 inch high by 14 inch wide usable aperture opening in an aluminum search head enclosure, with digital controls. The detection head is mounted on a 9.75 inch wide by 56 inch long belt conveyor running in a left to right product flow direction (from the perspective of the control panel), with plastic interlocking chain type belt; running at a 54 inch working height.

This integrated metal detection system features a pneumatic (compressed air) blow-off reject system with an air tank; --with the reject push-off direction to the right.
Digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products.  110 / 220 volt (standard household current) single phase electrical input for both the detection head and conveyor drive.

In stock in good /operable condition, available for timely shipment.

Alard item reference: Y1335

y1095

BEAN SNIPPER DEMO VIDEO
HUGHES STAINLESS STEEL MID-SIZE BEAN SNIPPER...


...manufacturer rated  for 2,500 lbs per hour throughput capacity on green beans or wax beans. 32" diameter snipping drum with plastic pockets, 48 stainless steel snipping knives. Stainless steel infeed chute, baffles, frame and drop-down side covers. Trunion drive with 2 HP 3 phase motor.


In stock in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

You may view a picture of this machine at
http://www.alard-equipment.com/a-f/y1095.htm
OR find it on our general listings page under "B" for BEAN SNIPPER.
Alard item reference #:Y1095

y1275

y1275b_email.jpgALARDSIEVE STAINLESS STEEL WASTEWATER RECOVERY SCREEN, horizontal configuration, with 36" wide (side to side) by 21" long (top to bottom) open screen area, with .040 sieve openings in it's tri-rod / wedge-wire screen.

At the back of the cabinet is a threaded 4" diameter inlet feeding to the 19" long (back to front overflow partition) by 36"wide, by 21" deep (overflow edge to bottom) infeed tank / head tank. Water flows over a 7" long (top to bottom) dead plate, and then onto the open screen. Water goes through the screen while solids that cannot pass through drop down the screen and over the 1.25" bottom edge solids discharge lip. The screen has a 16" long (top to bottom) splash plate which  catches any over-spill and directs it back down the screen in a laminar flow. Water passing through the screen is collected in a water reclaim tank with a 6" diameter flanged back-of-cabinet discharge outlet. The cabinet has access ports at each side to reach behind the screen for cleaning, and each tank (head tank and recovery tank) have a 1" diameter threaded female cleanout port at the very bottom edge of the tank.

All food grade type 304 stainless steel construction. 22" infeed height, 10" solids
y1275c_email.jpg discharge height, and floor level recovered water discharge height of cabinet only, withOUT any platform or stand. This water recovery screen / cabinet has overall dimensions of 38" overall length by 38.5" overall  width by 40" overall height. All the aforementioned dimensions are withOUT any stand; in most applications, this static water recovery screen would be positioned on a platform or stand to allow the solids to discharge into a tote, bin, dumpster, or other receiver (possibly a screw press).

This hydrosieve type screen is NEW in stock, fully assembled, ready to go and available for immediate shipment.
Alard item reference #:Y1275



y1353

y1353_email.jpgNEW LOCK MET 30+ UNIVERSAL THREE-FREQUENCY STAINLESS STEEL DIGITAL METAL DETECTOR Model Met30+IP693FHF, with STAINLESS STEEL CONVEYOR.

10.5" high by 19.75" wide usable aperture
stainless steel search head on a 6 foot long by 18" wide stainless steel conveyor with interlocking plastic chain belt running over a washdown anti-static bed with, adjustable infeed guide rails and belt-stop alarm reject. Left to right flow from operator controls position. 34" working height with +/- 2"height adjustable threaded  rod feet, on 5" high locking casters.
1/2 HP single phase washdown motor.

Digital operator controls, with product presets, and settable for three frequency levels (low, medium, and high frequency), allowing for fine tuning and optimal sensitivity across an exceptionally wide range of products / product types (e.g. wet, dry). All food-grade sanitary stainless steel washdown system configuration.

110 volt (standard household current) single phase electrical input.

Includes 1 year manufacturer warranty.

This metal detection system is in stock NEW, ready to go and available for immediate shipment.
Alard item reference #:Y1353

y1354

y1354b_email.jpgNEW LOCK MET 30+ UNIVERSAL THREE-FREQUENCY STAINLESS STEEL DIGITAL  METAL DETECTOR WITH CONVEYOR, Model Met30+IP69 (3F).

10.5" high by 19.75" wide usable aperture
stainless steel search head on a 6 foot long by 18" wide stainless steel conveyor with interlocking plastic chain belt running over a washdown anti-static bed with, adjustable infeed guide rails and belt-stop alarm reject. Left to right flow from operator controls position. 34" working height with +/- 2"height adjustable threaded rod feet, on 5" high locking casters. 1/2 HP single phase washdown motor.

Digital operator controls with product presets, and settable for three frequency levels (low frequency, medium, and high), allowing for fine tuning and optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, etc).

110 volt (standard household current) single phase electrical input. All food grade sanitary stainless steel washdown system configuration.

Includes 1 year manufacturer warranty.

Used at trade shows as a demo machine, now in stock in LIKE NEW condition.
Alard item reference #:Y1354

About this Archive

This page is an archive of entries from April 2012 listed from newest to oldest.

March 2012 is the previous archive.

May 2012 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)