A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

July 2017 Archives

48 inch VIBRATING SEPARATOR, food grade, stainless steel, Y3582

VIBRATORY SEPARATOR SCREEN, ROUND 48 inch diameter, stainless steel...
A Midwestern GYRA-VIB SEPARATOR, Model MR48S8-8, for separating solids from liquids in dewatering / wastewater recovery applications, for size grading of granular, particulate, and other solids, for powder sifting, fines removal, scalping, and other such screening applications.



  • 48 inch diameter stainless steel screen, single 8 inch high stainless steel deck ring, over an 8 inch deep stainless steel bottom pan ring.

  • Each ring has an 8 inch diameter discharge spout.

  • Multiple deck / multiple-screen configurations are available for grading multiple sizes; --CALL ALARD at 315-589-4511 to discuss your ood process screening, grading, dewatering, and/or solids separation needs.

  • Equipped with a fine 80 mesh stainless steel screen. Other sieve size and types of screen materials are available to buyer specification; --CALL 315-589-4511 with your screen specs.

  • 41 inch infeed height, 31 inch top ring discharge height, 22 inch bottom ring discharge height.

  • All food grade stainless steel construction screener, including stainless steel base and "table".

  • Bolt mounted lower frame assembly (to prevent frames from turning as can happen on conventional clamp mount systems).

  • Reversible center locking device capable of tensioning the screen mesh upward as well as downward.

  • Twelve .250 wire diameter 10-coil heavy duty springs.

  • Midwestern patented rotational system including two balance cages and weights.  This balance cage system allows for easier access and rapid adjustment of weights without tools, controlling both amplitude and lead angle.

  • Internal direct drive motor 2.5HP 208/230/460 volt 3 phase.

NEW with 1 year manufacturer workmanship and materials warranty.

As of this writing, this 48 inch vibrating screen in in stock at Alard NEW and  and available for immedite shipment: CALL ALARD 315-589-4511 to confirm availability, and to discuss your particular specifications.

Alard item reference #:Y3582

Food METAL DETECTOR with CONVEYOR, stainless steel, 20x13, Y3392

FOOD GRADE METAL DETECTOR with BELT CONVEYOR, all stainless steel, 20 x 13.

A refurbished stainless steel Safeline Signature metal detector with a NEW stainless steel BELT TRANSFER CONVEYOR, for food product metal detection and other related industrial production applications.


  • Greater than or equal to 12.5 inch high by 19.75 inch wide USABLE aperture opening with the conveyor belt in place (14 inch overall aperture height).

  • Newly fabricated stainless steel tubular frame conveyor with 18 inch wide by 6 foot long food grade plastic interlocking chain type belt.

  • Integrated operatore conrrols, with belt-stop alarm reject configuration.

  • All food grade stainless steel construction.

  • 110 volt single phase electrical input.

AS of this writing, this reconditioned Safeline conveyorized metal detection system with NEW belt conveyor is in stock at Alard equipment, in the final phases of completion in our shop, available in EXCELLENT operational, electrical, mechanical and cosmetic condition for timely shipment.

Alard Item Ref. #:Y3392

48 inch diameter ROTARY ACCUMULATOR TABLE, stainless steel, Y2712

ACCUMULATING / FEED DISK, 48 inch diameter, all stainless steel...

y2712_crop_email.jpgA JDA PROGRESS Model 48SS rotary turntable accumulation disk.


  • 48 inch diameter stainless steel disk with underside support trunnions.

  • 3 inch high adjustable side guide rails, with opening configured /  previouslyused for feeding products from a conveyor onto the disc in a pack-off disk application.

  • 32 inch +/- working height on adjustable foot pads.

  • All food grade sanitary stainless steel construction.

  • Variable speed control.

  • 110 volt single phase electrical input.

As of this writing, this rotary accumulation turntable is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2712

Z-SHAPED FEED CONVEYOR, food grade, stainless steel, Y3552

Z-SHAPED ELEVATING BELT CONVEYOR, food grade, stainless steel, 14.5 inches wide...


An angled frame Z-type stainless steel inclined feed conveyor, with cleated belt.


  • y3552g_crop_email.jpg5 foot long horizontal infeed section.
  • 8 foot long incline section.
  • 3 long horizontal discharge section.
  • 14.5 inch wide food grade plastic interlocking chain type belt, with  6 inch  high cleats on 18 inch centers.
  • Belt runs between adjustable 7 inch high UHMW plastic side rails.
  • 26 inch infeed height, 5 foot 7 inch discharge height.
  • All food grade stainless steel construction.
  • Top mounted 110 volt single phase (standard household current) gearmotor drive.

As of this writing, this Z shaped elevating feed convyeor is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

Alard item reference #:Y3552

Vegetable SEGMENT CUTTER, INCREMENT CUTTER, stainless steel, Y3469


An industrial segment cutter and trimmer, manufacturer recommended for slicing to length of standard and long stalk celery, carrots, bell peppers, collar greens, and for segmenting other elongated vegetables such as zucchini, with two length-cut settings in one machine...


  • Manufacturer rated for up to 1,000 lbs per hour.

  • 32 inch wide by 5 foot long white food grade plastic belt wtih 4 inch high carrying cleats on 6 inch centers.

  • Edge tip / butt / crown / stem trimming cut along each edge, adjustable for 0 to 2 inch trim slice.

  • y3469j_crop_email.jpgTwo cuts on one conveyor, 3.5" knife spacings on right side of belt, 2" segment cuts on the left side of belt; can run both sides simultaneously.

  • 36 inch wide by 18 inch long stainless steel raw product stacking tray over infeed end of belt, 1 inch deep, with UHMW plastic bottom surface.

  • 28 inch infeed height, 26 inch discharge height.

  • All food grade stainless steel construction.

  • Washdown configuration.

  • Stainless steel shrouded motors, 1/2 HP belt drive, 1HP knife drive.

  • Stainless steel control box with safety interlock system, and variable frequency controls for both drives.

  • 208/230 volt 3 phase electrical input.

As of this writing, this two lane length slicing and trimming machine is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference: #Y3469

Urschel Comitrol model 3600 MILL, slant mount, hopper fed, Y3440

URSCHEL COMITROL 3600 PROCESSOR, angle mount, hopper feed...
A compact Comitrol mill for low to high volume operations. Widely  used for rework of gelatin capsules, biscuits, candy, noodles and a full  spectrum of bakery goods. Also manufacturer recommended for reducing meats,  fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses,  chemical and pharmeceutical applications.

  • 8.5 inch long by 12 inch wide by 12 inch deep tapered infeed hopper with safety grid, feeds product to the 3 inch cutting head; --slant mounted mill orientation facilitates gravity-feed.

  • Manufacturer offers a wide range of  cutting  heads and impellers for  particle sizes ranging from coarse to fine  emulsions /powders / granules. CALL  315-589-4511 to discuss your cutting  specification.

  • Continuous operation for uninterrupted production.

  • Designed for easy cleanup and operation.

  • Food grade, all stainless steel product contact surfaces and support frame.

  • Comes bolted to a stainless steel work table, 4 feet long by 2 feet wide, by 36 inches high, with a bottom shelf at an 18 inch working height, all on 6 inch high casters for portability; and providing for a 68 inch infeed height and a 48 inch discharge height.

  • Powered by a 10 HP 208/230/460 volt 3 phase motor (please call 315-589-4511 with your voltage specifications) with a safety interlock system with stainless steel factory control panel, which cuts power to the machine if guard is removed.

As of this writing, this Urschel Comitrol 3600 milling machine is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, ready to go, and available for timely shipment.

Alard item reference #:Y3440