A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

February 2019 Archives

DRUM DUMPER, hydraulic, Y2817

Hydraulic Power included...


The National Bulk Equipment Model 2L2-SS barrel dumper / bin dumper is an open container discharger for unloading non-dust generating foods including herbs, spices, purees, pastes, vegetables, fruits or other bulk materials from 55 gallon drums or a multitude of other barrel sizes...


  • 750 lb. lifting capacity

  • Approximately 130 inch maximum lift height.

  • Accommodates standard 55-gallon drums approximately 23 inch diameter from 28.5 inch to 38.5 inches tall.

  • Hydraulic power pack system included, with 5HP hydraulic pump, and reservoir.

  • y2817t_crop_email.jpgUpper half of barrel chamber has UHMW liner with stainless steel retainer brackets.

  • Frame mounted control panel.

  • Painted steel construction.

  • Gasketed PVC operator control box with on/off, dump, return, emergency stop, and safety lockout switches.

As of this writing, this barrel dumper is in stock at ALARD, in very GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your product handling need.

ALARD item reference #: Y2817

Packrite continuous BAG SEALER Y4128




The Packrite 6000 BAG SEALER is manufacturer recommended for industrial food process and USDA sanitary food packaging applications, as well as for medical, military, agricultural, and many other flexible bag and pouch sealing applications. It seals most types of barrier materials in addition to straight polyethylene up to 12 mil single thickness or 6 mil single thickness on bags with gussets (24 mil total). Change over from one material to another is done with very little or no adjustment required...


  • Manufacturer rated for up to 550 inches per minute on up to 10 mil thicknesses.

  • Flat seal, 3/8 inch seal width.

  • Digital temperature control.

  • Left to right product flow.

  • Stainless steel top and side shrouding.

  • Stainless steel adjustable height stand.

  • Stainless steel corrosion resistant bottom shrouding.

  • Variable speed drive (110 volt single phase input).


As of this writing, this Packrite continuous-flow bag-sealing machine is in stock NEW at ALARD, fully assembled and operational; a new machine available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food packaging needs.

ALARD item reference #: Y4128

Waukesha 130-U2 PD PUMP with drive, 3A dairy sanitary Y2330

with drive and base...


A Waukesha Cherry-Burrell sanitary PD twin lobe pump, manufacturer recommended for pumping viscous fluids, slurries, or particulate bearing liquids in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications...


  • 3 inch inlet and discharge ports with sanitary Tri-clamp connections in a horizontal flow orientation.

  • y2330o_crop_email.jpgLarge diameter shafts for greater strength & stiffness. Rotor/shaft connection sealed from the product zone. Non galling Waukesha 88 alloy rotors for tighter running clearences and higher efficiencies.

  • A USDA / 3A Dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.

  • Coupled to a 15HP 208/230/460 volt 3 phase mechanical drive, geared for 388 RPM at the pump lobes, for up to approximately 98gpm throughput (depending on product viscosity and head pressure, pump curves available on request).

  • Manufacturer rated for up to 600 RPM and 200psi working pressure.

  • Pump and drive mounted together on a stainless steel base with threaded rod adjustable leveling feet.

As of this writing, this Waukesha lobe pump is in stock at Alard, and is in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade sanitary pump requirements.

Alard item reference #:Y2330

500 gallon TANK, food grade stainless steel, Y3598

food grade stainless steel...


A Tasker food grade 500 gallon vertical single wall food grade stainless steel tank...


  • 64 inch diameter by 37 inch high sides.

  • Shallow cone bottom.

  • Dual hinged covers.

  • Three (3) 2 inch Tri-clamp inlets on top.

  • Two (2) 3 inch Tri-clamp inlets on side at top.

  • 2.5 inch center bottom outlet with Tr-clamp fitting.

  • Food grade sanitary stainless steel construction.

  • y3598j_crop_email.jpgIncludes mount for a clamp-on mixer (mixer not included) for use as a mix tank.

As of this writing, this Tasker 500 gallon tank is in stock at ALARD, being sold AS-IS in good condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your food processing needs.

ALARD item reference #: Y3598


CONVEYOR BELT with liquid catch pan, 14x42,

all stainless steel, for dewatering, washing, inspection...

from Alard Equipment Corporation.

A Turatti Model 1580-17-000 DEWATERING CONVEYOR, for solids separation, recovery of liquids, and / or water removal from a wide array of products and applications including fresh and fresh-cut fruits & vegetables. Well suited for handling delicate and/or fragile food products. If configured with water sprays this conveyor can be used as a SPRAY WASHER to rinse, treat, or wet product, for example for increasing freezer tunnel efficiencies. With the inclusion of operator catwalk platforms, this conveyor could also be used as an inspection conveyor.


  • 42 inch wide by 14 feet 8 inch long plastic woven mesh belt with 1/16 inch perforations.

  • The belt runs between 8 inch high stainless steel sides.

  • 50 inch working height on adjustable legs.

  • Full bottom de-watering pan slopes to 3.5 inch side outlet.

  • Removable dual discharge chute with 13 inch by 15.5 inch dimpled surface.

  • Belt-cleaning stainless steel air manifold bar under the belt at discharge.

  • Sanitary bearings.

  • Food grade sanitary stainless steel construction with safety shrouding.

  • (3) sets of mount points where air knives (not included) or overhead water spray manifolds (not included) could be added.

  • 1HP stainless steel drive motor.

  • 208/230/460 volt 3 phase electrical input.

As of this writing, this Turatti dewatering conveyor is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process solids separation and dewatering needs.

ALARD item reference #: Y4182

Urschel Comitrol 1700 Microcut MILL, Y4145

URSCHEL COMITROL PROCESSOR MODEL 1700, 30HP, configured for Microcut head.


The Urschel Comitrol 1700 microcut food grade milling machine is manufacturer recommended (with cutting parts specific to application) for particle size reduction of free-flowing products for fruit and vegetable purees, slurries, pastes, patees, mustard, peanut butter, catsup, baby food, horseradish, dressings, textured vegetable protein, gels, ointments, creams, liquefying, dispersing, emulsifying, etc...

SPECIFICATIONS per manufacturer literature:

  • Maximum product input size, in general should not exceed 3/8 inch (9.5mm) or less depending on specific microcut head and impeller used).

  • Continuous operation for uninterrupted production.

  • Food grade USDA sanitary.


  • Came without a cutting head and impeller, so the machine can be easily completed by bolting on the specific microcut cutting head and impeller combination needed for your particular application: Call 315-589-4511 to dicuss your specific industrial food process particle size reduction need.

  • y4145c_crop_email.jpg Hopper infeed (can optionally be fitted with a pipe infeed for pumpable product applications).

  • Stainless steel construction including support frame.

  • Oil mist system for smooth operation of high-speed cutting head.

  • Factory electrical control panel with safety interlock system.

  • 30 HP brakemotor drive, 208/230/460 volt 3 phase electrical input.

As of this writing, this Urschel mill is in stock at Alard, needing only a cutting head and impeller to buyer specification to be complete, and otherwise in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511
to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y4145

Urschel SLICER, Model OV, Y4164

URSCHEL Model OV cross-cut transverse SLICER,
for elongated food products...


Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.


  • Cutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thicknesses slices from 1/16 (1.6mm) of an inch up to " to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.

  • Rated for products no more than 2.75 inches (70mm) in diameter or width.

  • Flat or krinkle cut blades and shear edges are available for corrugated or flat slices.

  • One slice is made at a time, which prevents crushing or distortion of the product.

  • An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.

  • The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.


  • y4164g_crop_email.jpg24 inch long by 15 inch wide stainless steel infeed hopper.

  • V-trough belt aligns and centers products for uniform cross cut slicing.

  • Standard "floppy belt" product hold down mechanism for positive product alignment and stability.

  • Spiral discharge chute gently decelerates the cut slices.

  • Food grade USDA sanitary stainless steel construction including frame.

  • Factory control panel with safety interlock system. 2 HP 208/230 volt 3 phase brakemotor drive.

As of this writing, this Urschel model OV slicing machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit and vegetable slicing specification.

Alard item reference: Y4164

Lyco Easy-Cool four stage COOLER, Y4132

LYCO Easy-Cool, 4-zone...


A Four Zone LYCO EASY-COOL CONTINUOUS COOLER, all food grade sanitary stainless steel. Manufacturer recommended for corn, peas, green beans, pasta, rice, proteins, dry beans, cut potatoes, potatoes, onions plus many other vegetables and a multitude of food types and shapes.

Manufacture literature describes a revolutionary design for rapid cooling of particulate food items, which they say can, for example cool cooked-hot pasta products down to 40 degrees Fahrenheit, in a fraction of the time of traditional cooling methods. Each zone is capable of submerging and mixing product in cold well water or chilled water where the product rapidly releases heat.


  • Rapid cooling in a small footprint.

  • Dramatically reduced cooling times.

  • Improved food safety AND productivity.

  • Consistent results and uniform end product.

  • Lower freezer and/or refrigeration costs.

  • Heat from the first zone can be recycled to pre-heat blancher or cooker water.

MANUFACTURER LITERATURE describes this 4-stage Lyco Easy-Flow continuous cooler SPECIFICATIONS as:

  • High-capacity, up to 5,000 pounds an hour capacity.

  • As a high-speed particulate cooler able to cool most products like pasta, rice, or vegetables, from 200 degree Fahrenheit down to 40 degrees Fahrenheit in approximately 30 seconds.

  • As a flash chiller able to cool food products from 200 degrees Fahrenheit to 70 degrees Fahrenheit in 10 seconds.


  • Removable wedge-wire dewatering screens.

  • Four (4) Alpha Laval LKH40 sanitary centrifugal pumps, one for each water plenum zone, each with Sterling stainless steel shrouded 5HP motors.

  • Four (4) Yaskawa 1000 Nema 4 variable speed drive controllers in stainless steel enclosures with hinged access covers mounted along the side of the cooler.

  • Overall Dimensions: 190 inch long by 60 inch wide by 63 inch high.

  • 44 inch infeed height, 29.5 inch discharge height.

  • All food grade sanitary stainless steel construction with open, sanitary, easy to clean design.

  • Stainless steel electrical feed box with safety-lock-out, 460 volt 3 phase electrical input.

As of this writing, this Lyco flash chiller / plenum cooler is in stock at ALARD, in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

Alard item reference #: Y4132


for fruit and vegetable products...

POTATO WEDGE CUTTING machine, Turatti spear cutter, Alard item Y3099
from Alard Equipment Corporation.

Turatti Model 1411-26 slicer, for cutting pickle spears, or potato wedges, and spear or wedge cutting other vegetable and fruit products without pits or stones.


  • (8) 12 inch diameter powered stainless steel blades for cutting (8) wedge slices. Could cut quarters rather than eights, by removing every other blade.

  • All food grade stainless steel, including blade drive arms, shrouds and stands.

  • Tubular stainless steel frame and base-plate, currently configured for 58 inch infeed height and 26 inch discharge height, on adjustable feet.

  • Base frame has a 35.5 inch wide clearance between legs to accommodate placement of a tote beneath the discharge to catch product.

  • 360 degree safety shrouding, with latching access doors for convenient maintenance access. PVC control box with safety interlock, cuts power to the machine if any of the access doors are unlatched / opened.

As of this writing, this pickle spear slicer / french fry potato wedge cutter just arrived into stock at Alard, has been test run and is in good operational condition available for immediate shipment as-is; or can be cleaned and serviced prior to shipment to assure excellent operational, mechanical, and cosmetic condition; per buyer specification.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process fruit and vegetable cutting machine needs.

Alard item reference #:Y3099

Vanmark Hydrolift VERTICAL SCREW FEEDER, Y4109

24 inch diameter, 16 foot lift, stainless steel...


The Vanmark Hydrolift Series 4000 vertical screw elevator / destoner, provides a space-saving vertical feed conveyor which also provides a final rinse and settling point for rock and stone removal from root crop vegetables including potatoes, carrots, sweet potatoes, yams, beets, onions, as well as other fruit and vegetable products; while elevating it to the next step in your process.


The vertical auger creates water turbulence that separates stones and debris from product, washes loose dirt away, and acts as a hopper-feeder lifting the product to the discharge point. Separated rock, dirt and debris settle at the bottom of the tank for manual removal. The Hydrolift also provides your product with a water-rinsing soak bath, where the use of anti-oxidants in the solution can help prevent discoloration and provide a final washing to improve the quality of your finished product.


  • Combination all-in-one destoner / vertical elevator / dip tank configuration provides triple-utility in a small footprint for maximum plant floor-space utilization.

  • y4109a_crop_email.jpg28 inch long by 16 inch wide by 24 inch deep stainless steel wet hopper infeed, with water inlet and bottom drain connections.

  • 16-inch diameter auger allows for a wide range of food products, with high throughput tons-per-hour capacity. Currently configured for right-angle discharge.

  • 192 inch (16 foot) product discharge height with a flanged outlet opening, on stainless steel support frame; --feet must be bolted to the floor for safety / stability.

  • Discharge can be repositioned for straight-line, right-angle, left-angle or reverse discharge positions.

  • Food grade all stainless steel construction.

  • 2HP 3-phase drive.

As of this writing, this stainless steel Hydrolift continuous inline screw auger destoner is in stock at Alard, in good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process vegetable washing equipment needs.

Alard item reference #: Y4109

STEAM BLANCHER, 20x2 belt, stainless steel, Y4159

hydrostatic fruit and vegetable
thermal blanching tunnel,
20x2 belt, food grade stainless steel ...

VEGETABLE BLANCHER, steam belt blanching tunnel, Y4159
from Alard Equipment Corporation

An A.K. Robins BELT STEAM BLANCHER for steam blanching of vegetable and fruit products prior to freezing or canning in an industrial food processing operation.


  • 20 foot long by 26 inch wide stainless steel wire mesh belt with fine 1/8 inch wide openings runs through the steam tunnel.

    • 2 foot long open belt infeed and discharge sections, with 16 foot length of travel in steam / steam vapor exposure.

  • Top and bottom steam headers (over and above the belt), each with (2) zone input connections for live steam injection.

  • (5) hinged top covers, each of which rests on all four sides in a system of hydrostatic-water-seal troughs, to prevent steam from escaping.

  • Fully INSULATED body and covers.

  • Vinyl flaps at each end to keep steam from escaping from the infeed and discharge.

  • (6) side cleanout access for under-belt cleanout access (3 per side).

  • Steam stacks at each end.

  • All food grade USDA sanitary stainless steel construction.

  • Highly polished "scalloped" stainless steel cosmetic finish.

  • 3/4HP 3 phase mechanical variable speed drive geared for 18 to 80 inches per minute belt speed.

As of this writing, this hydrostatic steam belt blancher is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511
to confirm availability, and to discuss your specific fruit and vegetable blancher requirement.

Alard item reference #: Y4159

About this Archive

This page is an archive of entries from February 2019 listed from newest to oldest.

January 2019 is the previous archive.

Find recent content on the main index or look in the archives to find all content.

JOIN our

Email list!
Email PRIVACY explanation link!

6483 Lake Avenue
Williamson, NY  14589
315-589-3871 (fax)