A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

November 2020 Archives

Comitrol 2100 cutting BROCCOLI PUREE, Y4725

Urschel COMITROL 2100 PROCESSOR MILL,
CUTTING BROCCOLI PUREE
VIDEO DEMO

Broccoli pureeing DEMO VIDEO
Urschel Comitrol 2100 making garlic puree Y4725
from Alard Equipment Corporation.

A reconditioned Urschel COMITROL 2100 PROCESSOR, 60HP, with agitated feed hopper, with feed auger. Refurbished, excellent operational, mechanical, electrical and cosmetic condition.

As of this writing, this Comitrol model 2100 meat grinder is IN stock available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat cutting and grinding equipment needs.


Alard Equipment Corporation item Y4725

TURBULENT FLOW JET WASHER, new in stock, Y4262

Alard TURBULENT FLOW JET WASHER,
leafy greens washer,
fruit and vegetable WASHER FLUME,
food grade stainless steel...



DEMO VIDEO
Alard Turbulent Flow Jet Washer

from Alard Equipment Corporation.

An AGITATED IMMERSION WASH SYSTEM, wash and chill flume, with water-jet agitation for gentle but active washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.


FEATURES:

  • This spiral-flow WASH FLUME is 11 feet long by 31 inches wide with agitating water jets all along the left-side near the bottom to provide spiral water flow for gentle immersion washing of delicate food products.

  • The wash tank overflows onto a 5 foot long by 30 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.

  • The conveyor is powered by a .5 HP stainless steel shrounded motor with an aluminum shrouded gear reducer.

  • The water falls through into a stainless steel catch and balance tank, with a new Thomsen model 8 stainless steel RECIRCULATION PUMP with 7.5 HP motor.

  • Check valve included to keep the wash tank water from draining into the wash tank when the pump is shut off.

  • All pipe fittings / connections are USDA food-grade sanitary.

  • All food-grade sanitary stainless steel construction.

  • The water jet nozzles are removable for sanitation.

  • All drives 208/230/460 volt 3 phase electrical input.


As of this writing, this spiral-flow washer is NEW IN STOCK at Alard, in fully assembled and available for immediate shipment.


CALL 315-589-4511
to confirm availability, and to discuss your fresh-cut produce packing and process equipment needs.


Alard item reference #: Y4262

Urschel Comitrol 2100 MEAT GRINDER, Y4725

Urschel COMITROL 2100 PROCESSOR MILL,
VIDEO DEMO


DEMO VIDEO
Urschel Comitrol 2100 MEAT EMULSIFIER, Y4725
from Alard Equipment Corporation.

A reconditioned Urschel COMITROL 2100 PROCESSOR, 60HP, with agitated feed hopper, with feed auger. Refurbished, excellent operational, mechanical, electrical and cosmetic condition.

As of this writing, this Comitrol model 2100 meat grinder is IN stock available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat cutting and grinding equipment needs.


Alard Equipment Corporation item Y4725

FOOD METAL DETECTOR with conveyor, 20x12 opening, new in stock Y4621


FOOD PROCESS METAL DETECTOR with BELT CONVEYOR,
20x12 opening, stainless steel...

y4621i_crop_email.jpgIndustrial process metal detector with covneyor belt, 20x12 opening
available now in stock new, Alard item Y4621

CASSEL Model Metalshark2 MULTI-FREQUENCY washdown sealed stainless steel conveyorized metal detection system for industrial process applications.


FEATURES:

  • 10 7/8 inch (275mm) high by 19 11/16 inch (500mm) wide net USEABLE aperture opening with the conveyor belt in place.

  • The 304 stainless steel frame wash down belt transfer conveyor has a 70.5 inch (1800mm) long by 17 9/16 inch (450mm) wide interlocking plastic chain type belt, running at a 30 inch (762mm) working height, with adjustable feet allowing +/- 4 inch (100mm) height adjustment.

  • The conveyor is complete with a belt-stop alarm reject configuration, and a variable frequency speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

  • All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

  • The search head is complete with integral touch pad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and Ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • 110 volt single phase (standard household current) electrical input.

  • FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.

  • Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • 304 stainless steel search head and conveyor construction.

  • NEW EQUIPMENT - Includes a two (2) year manufacturer warranty on hardware / parts.


As of this writing, this conveyorized metal detection system is in stock NEW at ALARD, ready to go and available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your particular industrial product inspection needs.

ALARD item Reference #: Y4621


Safeline METAL DETECTOR, 25x8 with conveyor, Y4778


Safeline FOOD METAL DETECTOR,

25x8 opening with conveyor belt...

y4778a_crop_email.jpgSafeline Food Process METAL DETECTOR with coneyor belt, Y4778


A refurbished Safeline large-opening food grade industrial process metal detector on a NEW stainless steel belt transfer through-conveyor, with reject system, for food processing and packaging, and / or other applications where detection of metal contamination is desire...


FEATURES:

  • 25.5 inch wide by 8.25 inch high USABLE aperture opening with the conveyor belt in place, overall opening hight is 10 inches without the conveyor bed).

  • NEW 84 inch long by 21.5 inch wide conveyor, with interlocking plastic chain type belt.

    • Conveyor and search head are integrated with a belt-stop-alarm reject system.

    • The conveyor bed runs at a 34 inch working height with +/- 2 inch adjustable feet.

    • Includes variable speed control for the conveyor belt.

  • y4778f_crop_email.jpgEpoxy painted metal detection head enclosure.

    • Complete with integral digital touchpad controls with multiple product presets.

  • Switchable high-frequency metal detection system ideal for maximum sensitivity on "low product effect", e.g. dry products.

  • 110 volt single phase (standfard household current) electrical input.


AS of this writing, this food process metal detection system is IN stock at Alard. The Safeline metal detector head is in EXCELLENT operational, electrical, and mechanical condition, and the conveyor is new. The head and power supply box have not been repainted, and show prior use but cosmetic condition is very good.

CALL 315-589-4511 to confirm availability, and to discuss your industrial process metal detector need.

Alard item reference #: Y4778

About this Archive

This page is an archive of entries from November 2020 listed from newest to oldest.

October 2020 is the previous archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)