A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

June 2019 Archives

Urschel RA VIDEO DEMO, Alard item Y4254


URSCHEL Model RA DICER,

video demonstration / demo video...

A 3-dimensional fine dicing machine for a wide range of small to intermediate size dices and strip cuts for a variety of products such as pickle relish, salsa, fruits, vegetables, cheese, processed meats & nuts, citrus peel, green peppers, pineapple, and for dicing ice-cream ingredients such as cookies and candies

In this video demonstration we dice potatoes, and chop green onions, asparagus, herbs, and walnuts.

Urschel RA DICER cutting potatoes onions aspragus herbs nuts,
item reference Y4254
from Alard Equipment Corporation.


FEATURES:

  • Equipped with a secondary / by-pass in-feed chute, which bypasses the slice shell for strip cutting applications such as for chopping herbs, green onions, nuts (e.g. almonds, cashews & peanuts) and other fruit and vegetable products .

  • Maximum product input size of 3.5 inches (88.9mm) in any direction.

  • Three cutting dimensions (or two-dimensional cuts using aforementioned bypass feed chute).

    • Slice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.

    • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.

    • Crosscut knife cuts: 0.05 to 3 inch (1.3 to 76.2mm) -- change part: Call 315-589-4511 to tell us YOUR cutting specification!

    • Food grade sanitary stainless steel product contact surfaces.

  • 3HP drive motor.

  • Stainless steel control panel.

  • 208/230/460 electrical input.


As of this writing, this Urschel RA is in stock at ALARD, in stock at Alard, in GOOD operational and mechanical condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your high-capacity food process cutting machinery needs.

ALARD item reference #: Y4254

Urschel H demo VIDEO, Y3982


Urschel model H
DEMONSTRATION VIDEO...

Urschel Model H DICER cutting potatoes, sweet potatoes, Y3982
from Alard Equipment Corporation.

URSCHEL Model H DICER, cube cutter, strip cutter, slicer. A three dimensional cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, canteloupe, endive, tomatoes, cucumbers, horseradish, apples grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and many other foods; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions:

  • Slice thickness: From 1/8 inch / 3.2mm, up to 3/4 inch / 19.1mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle (change part) spacing: from 3/4 inch (19.1mm) up to 1.75 inches (44.5mm).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel H can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • An optional "G" kit is available to extend the range of this machine to overlap with the Urschel model G, and we can otherwise complete this machine with cutting parts to buyer specification: Please call 315-589-4511 to discuss your particular food process cutting machine need!


FEATURES:

  • Stainless steel product contact surfaces, including slice shell and impeller with 7 inch slice shell opening, cutting spindles and knives.

  • All food grade stainless steel construction including spindle arms, guards, shrouds and tubular stainless steel frame.

  • Factory control box with safety interlock system.

  • Standard 2 HP 208/230 volt 3 phase drive.


As of this writing, Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to a timely shipment.


CALL 315-589-4511
to confirm availability, and to discuss your particular industrial food process cutting machine needs.



Alard item reference #:Y3982

Urschel OV VIDEO DEMONSTRATION, Y4191


Urschel OV SLICER demonstration VIDEO
cutting celery, carrots, hot dogs, and pepperoni...

Urschel OV with power hold-down, Y4191
from Alard Equipment Corporation.


URSCHEL Model OV cross-cut transverse SLICER, for elongated food products, with powered top hold-down belt. Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.



SPECIFICATIONS:

  • Cutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thicknesses slices from 1/16 (1.6mm) of an inch up to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.

  • Rated for products no more than 2.75 inches (70mm) in diameter or width.

  • Flat or krinkle cut blades and shear edges are available for corrugated or flat slices.

  • One slice is made at a time, which prevents crushing or distortion of the product.

  • An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.

  • The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.


FEATURES:

  • Power top hold-down belt provides positive product stabilization for straight and true vertical slices. Urschel specifies the narrow-belt hold-down for uniform diameter products from 3/4 inch (19 mm) to 1 1/2 inch (38.1 mm) in diameter.

  • 24 inch long by 15 inch wide stainless steel infeed hopper.

  • V-trough belt aligns and centers products for uniform cross cut slicing.

  • Spiral discharge chute gently decelerates the cut slices.

  • Food grade USDA sanitary stainless steel construction including frame.

  • Factory control panel with safety interlock system. 2 HP 208/230 volt 3 phase brakemotor drive.


As of this writing, this Urschel model OV slicing machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit and vegetable slicing specification.

Alard item reference: Y4191

Hi-Speed XE CHECKWEIGHER Y3960 video demo


Mettler-Toledo Hi-Speed XE

belt-transfer CHECKWEIGHER

VIDEO DEMO
Alard item Y3960


Mettler Toledo Hi-Speed XE CHECKWEIGHER, Y3960
from Alard Equipment Corporation.


CHECKWEIGHER, BELT TRANSFER, food grade, with reject system: A Mettler-Toledo HI-SPEED Beltweigh XE in-motion weighing machine for food product inspection by weight; checks food products and packages for proper fill weight, and rejects underweight and/or overweight portions according to operator settings.



FEATURING:

  • 8 inch wide belt transfer conveyor system consisting of four conveyor belts one after the other in the following sequence:
    • Two (2) 11 inch long infeed belts, one after the other, in a speed-up belt configuration to create product separation.
    • 11 inch long weigh-cell conveyor.
    • 17 inch long reject and takeaway conveyor belt.
    • White food-grade endless loop conveyor belts.
    • 36 inch working height on threaded rod adjustable feet.

  • Pneumatic air-cylinder push-off reject; --push-off is left-to-right from the perspective of one facing the infeed end of the conveyor looking toward the discharge.

  • Food grade checkweigher for food packaging process lines.

  • Powder coated steel frame with plastic shrouding and plexiglass shield.

  • 44 pound (20kg) weigh-cell.

  • Stand-alone pedestal mounted stainless steel control with touch screen operator control system.

As of this writing, this in-motion check-weighing machine is in stock at Alard in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your particular food packaging equipment needs.

Alard item reference #:Y3960

Simplex AS1 single-piston FILLER-DEPOSITOR Y3996


SIMPLEX Model AS-1

VOLUMETRIC PISTON FILLER / DEPOSITOR...

y3996c_crop_email.jpg


A food grade stainless steel tabletop single piston filling machine for filling containers or use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Manufacturer recommended for simple accurate filling of liquid, semi-solid, and/or wet particulate products such as salsa, sauces, relish, butters, chocolate, mayonnaise, jams / jellies, oils; and non-food products such as lotions, shampoos, scrubs cleaners, paint, solvents, oil, and other thick, viscous liquids or slurries.



FEATURING:

  • 1 7/8 inch diameter piston stroke adjustable for fills from 3 fluid ounces to 8.8 fluid ounces (88.7 to 260.2 ml) per stroke.

  • y3996g_crop_email.jpg22 inch diameter by 20 inch deep stainless steel conical infeed hopper.

  • Orifices are sized for particulate product handling, with a 1 1/8 inch by 2 inch oval valve port opening.

  • Comes with a 2.5 inch long by .25 inch diameter discharge spout which can be easily replaced if your particular need requires it: --CALL 315-589-4511 to discuss your product specifications.

  • Manufacturer rated at up to 26 containers a minute, with fill accuracy of up to 1/2% (actual results are influenced by product and container characteristics).

  • Food grade stainless steel product contacts, painted steel base.

  • Electric cam driven, with mechanical variable speed control regulating the fractional horsepower drive, set for 110 volt single phase electrical input (standard household current).


As of this writing, this Simplex AS1 is in stock, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular viscous food product / food- liquid filling machine requirement.

Alard item reference #Y3996


ABRASIVE PEELER WASHER SCRUBBER, continuous, 4-roll, stainless steel, Y3918


4-ROLL WASHER / SCRUBBER / PEELER,
for fruits and vegetables,
4-roll, stainless steel, continuous,
in-stock NEW...


y3918f_crop_email.jpg


A continuous four roll peeler-washer which can be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and others.


OPERATION:

Raw product is continuously fed to the peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action is provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine.


FEATURES:

  • 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.

  • Lubricating and rinsing action is provided in the chamber via a stainless steel water spray pipe header with spray nozzles.

  • y3918i_crop_email.jpgPeeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler /washing exposure; --at a 39 inch discharge height.

  • Water, peels and debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet.

  • Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing).

  • Shows in pictures with four (4) abrasive rolls, each 6 inch diameter by 6 foot long; but can be set with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeler / scrubbing action.

  • The abrasive brush rolls are mounted parallel (in-line) with product flow.

  • Complete with central lubrication cluster for ease of maintenance.

  • Chain / sprocket drive powered by a 3HP 208/230/460 volt 3 phase 60 cycle constant speed motor.

  • Includes "soft start" variable speed controller in a gasketed PVC NEMA 4 control box.


As of this writing, this scrubbing, washing, peeling machine is in stock NEW at Alard, ready to go and available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your particular fruit and/or vegetable peeling and washing equipment need.

ALARD item reference #: Y3918



Urschel RA-A DICING MACHINE, Y4220

Refurbished Urschel Model RA-A DICER.

y4220z_crop_email.jpg



A 3-dimensional fine dicing machine for a wide range of dices and strip cuts from a variety of products such as relish, salsa, fruits, vegetables, nuts, cheeses, and processed meats.



FEATURING:

  • Maximum product input size 3.5 inches (88.9mm) in any dimension.

  • Three cutting dimensions:

    • Slice thickness: 1/16 to 3/8 inch 1.6 to 9.5 mm, knob adjustable.

    • y4220u_crop_email.jpgCircular knife cuts: 1/8 to 1 inch / 3.2 to 25.4 mm, knives & spacers.

    • Crosscut knife cuts: .05 to 3 inch / 1.3 to 76.2 mm, change part.

    • CALL 315-589-4511 to tell us YOUR cutting specification!

  • All food grade USDA sanitary stainless steel construction.

  • Factory control panel with safety interlock system.

  • 5HP 208 / 230 volt 3 phase drive motor.



As of this writing, this reconditioned Urschel RA-A dicer is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, ready to go and available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your high-capacity food process cutting machine need.

Alard item reference #: Y4220


Whallon PD90 DEPALLETIZER, Y4161

MAGNETIC CAN DEPALLETIZER,
single high, automatic,
Whallon PD90.

y4161h_crop_email.jpg


Whallon Machinery has been building magenetic palletizers and depalletizers for over 25 years of servicing the food industry. Whallon magnetic can depalletizers are robustly built and designed to handle various can and pallet sizes. Cans are magnetically lifted from the pallet to the take-away belt and single-filed. Contact between the magnetic head and product layers is controlled by a pressure sensing system...

FEATURES:

  • 50 inch by 50 inch permanent magnetic head.

  • Mast swivels 90 degrees.

  • Standard 2.5 cycles per minute per manufacturer's literature.

  • y4161u_crop_email.jpgSingle directional 4 foot wide by 9 foot long interlocking plastic belt takeaway conveyor with mechanical variable speed.

  • 18 inch wide by 9 foot long stainless steel single file conveyor with 5 inch high rollers.

  • Operator control panel with auto / manual switches.

  • Painted steel construction.

  • Complete with 5 HP hydraulic pack.

  • 480 volt 3 phase electrical input.

  • Does not include pallet conveyor.


As of this writing, this single layer can depalletizer is in stock at ALARD, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food packaging equipment needs.

ALARD item reference #: Y4161


Urschel OV with power hold-down, Y4191


URSCHEL Model OV cross-cut transverse SLICER,

for elongated food products,
with powered top hold-down belt.

y4191x_crop_email.jpg


Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.

SPECIFICATIONS:

  • Cutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thicknesses slices from 1/16 (1.6mm) of an inch up to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.

  • Rated for products no more than 2.75 inches (70mm) in diameter or width.

  • Flat or krinkle cut blades and shear edges are available for corrugated or flat slices.

  • One slice is made at a time, which prevents crushing or distortion of the product.

  • An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.

  • The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.

FEATURES:
y4191v_crop_email.jpg

  • Power top hold-down belt provides positive product stabilization for straight and true vertical slices. Urschel specifies the narrow-belt hold-down for uniform diameter products from 3/4 inch (19 mm) to 1 1/2 inch (38.1 mm) in diameter.

  • 24 inch long by 15 inch wide stainless steel infeed hopper.

  • V-trough belt aligns and centers products for uniform cross cut slicing.

  • Spiral discharge chute gently decelerates the cut slices.

  • Food grade USDA sanitary stainless steel construction including frame.

  • Factory control panel with safety interlock system. 2 HP 208/230 volt 3 phase brakemotor drive.



As of this writing, this Urschel model OV slicing machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit and vegetable slicing specification.


Alard item reference: Y4191



FAS SPRINT pre-made bag & stand-up pouch filler-sealer, Y4016

Automated Packaging Systems
FAS SPRINT Revolution SidePouch
FOOD BAGGER.

y4016s_crop_email.jpg


The FAS Sprint Bagger food packaging machine is a bag-filling and sealing machine for pre-made bags. The system can run laminated stand-up pouches with gussted bottoms, or unsupported polyethylene bags on the same machine with no tooling changes, with fast changeover (less than 5 minutes) between different size and pouch formats. Specifically manufacturer recommended for demanding industrial food packaging applications with daily wash-down sanitation requirements.

The pre-made bags / pouches that run on this machine can also have reclosable zippers, resealable flaps, tamper-evident-perforations, and are available in an assortment of materials that can be pre-printed in up to 10 colors with high-resolution graphics, text and bar codes.

OPERATION:

y4016za_crop_email.jpgThe pouch indexing conveyor loads from a roll of bags or pouches in a box, and presents pre-opened plastic bags or pouches that are staged for immediate loading via a 5 foot long loading area, where packages can be filled by hand or by automatic filling machine (not included).

FEATURES:

  • "AutoThread" continuous automatic bag feeding and bag opening.

  • 5 foot long packaging filling / loading section.

  • Coordinated- motion seal-flattener optionally positions bags for smooth-sealing.

  • y4016zh_crop_email.jpgIntegral continuous-band bag sealer set for 3/8 inch seal.

  • Excess trim take up.

  • On casters for portability.

  • Allen Bradley Panelview touch-screen operator control panel, with 25 product presets to assist with quick and convenient product change-over.

  • Continuous, batch, intermittent, and/or foot-switch activation modes.

  • Accomodates a wide variety of loading methods, automatic infeeds, products and bag sizes.

  • Manufactuer rated for:

    • Pre-made bags 2 inch to 24 inches wide by 3 inches to 18.75 inches long

    • y4016zl_crop_email.jpgLoading conveyor adjustable from front to back for loading products or stacks of products up to six inches thick.

    • Bag material 1.5 - 4.0 mil thickness

    • Speeds up to 900 inches per minute.

    • The system can be hand loaded with up to three operators, which avoids the need to purchase an expensive infeed device. The ability to hand load is perfect for fragile products, short run or new products where the volume is low or unknown.

    • The capability to communicate with up to two automatic filling / infeed devices at the same time is a factory-standard feature of the control system.

  • Manufacturer recommended for frozen and IQF food products; meat, poultry, fish; fresh whole and cut produce; fresh and dried pastas; fresh and frozen snack foods; pet food products, medical, automotive and mail order fulfillment.

  • AIB and USDA sanitary food grade stainless steel construction.

  • This machine was manufactured new in 2014 and used on a limited basis for 2 years.


As of this writing, this stand-up pouch filler-sealer system is in stock at Alard, in very good condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial food packaging machine requirements.


Alard item reference #:Y4016

Urschel Comitrol 3600 video demo, Y3052

URSCHEL COMITROL 3600 PROCESSOR,
hopper - screw feed, 10HP,
VIDEO DEMO cutting cilantro.

Urschel Comitrol 3600 with screw-feed, chopping cilantro,
item reference Y3052
from Alard Equipment Corporation.


A compact screw fed Comitrol mill for low to high volume operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.



FEATURES:

  • 19 inch by 19 inch by 13 inch deep tapered infeed hopper with side mounted FMC Syntron feed-hopper vibrator to prevent bridging.

  • Powered screw feeder with 1/6 HP 3 phase drive motor.

  • Existing 2 inch cutting head included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.

  • Continuous operation for uninterrupted production.

  • Designed for easy cleanup and operation.

  • Food grade, all stainless steel product contact surfaces and support frame.

  • 10 HP 208/230/460 volt 3 phase motor for cutting head, with safety interlock system integrated with guards and shrouds.



As of this writing, this Urschel Comitrol 3600 milling machine is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, ready to go, and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food processing milling and cutting equipment needs.


Alard item reference #:Y3052

Stein BREAD & BATTER application line Y4248

STEIN BATTER & BREADING LINE, 16 inch,
(1) batter applicator with (2) breading applicators,
electric drive...

y4248_battering_conveyor_1a_crop_email.jpg

A Stein / FMC (now JBT FoodTech) batter / breading line designed for easy operation, maintenance & cleaning. Breaders can be arranged in a multitude of line configurations to handle poultry, fish, seafood, cheese, onions, mushrooms plus other coated substrates...

FEATURES:

  • Quantity Two (2) Stein Model 100-16 BREADING APPLICATORS:

    • y4248_breader_1a_crop_email.jpg16 inch wide woven wire belting with 1/2 inch spacing.

    • Manufacturer rated for 15 to 40 feet per minute (4.6 to 12 meters per minute).

    • Suitable for handling flour, predust and/or free-flowing coatings.

    • 6 inch diameter by 52 inch long breading lift auger with removable side cover.

    • Level glide discharge which maintains product orientation during transfer.

    • y4248_breader_2s_crop_email.jpgIncludes one (1) sifter and one (1) sprinkle conveyor.

    • Each applicator is equipped with a self contained blower.

    • Control panel with E-stop and independent push button start/stop.

    • Belt "tip up" feature for sanitation.

    • 90 inch overall length.

    • "V-Groove" casters mounted on adjustable height legs.

    • 1.2 HP variable speed drive motor.

    • All food grade sanitary stainless steel construction.

    • 460 volt 3 phase electrical input.

  • One (1) Model T-1-16 BATTER APPLICATOR:

    • y4248_battering_conveyor_1f_crop_email.jpg16 inch wide woven wire belting with 3/8 inch spacing.

    • "Immersion" applicator with submerging hold-down belt designed for viscous tempura style batters.

    • 12 inch long infeed conveyor.

    • 56 inch long submerging section with 40 inch long powered hold down.

    • Adjustable air knife (requires compressed air input).

    • 36 inch long discharge conveyor.

    • Belt "tip up" feature for sanitation of immersion belts.

    • 106 inch overall length.

    • Control panel with E-stop and indepenent push button start/stop.

    • "V-Groove" casters mounted on adjustable height legs.

    • 1/2 HP mechanical variable speed drive motor.

    • All food grade sanitary stainless steel construction.

    • 460 volt 3 phase electrical input.

  • y4248_batter_mixer_e_crop_email.jpgIncludes Koppens MK70 bottom agitation BATTER MIX TANK with pump.
    • Currently set for 575 volt 3 phase.


As of this writing, this batter/breading line is in stock at ALARD, in GOOD condition and being sold AS-IS for immediate shipment.


CALL 315-589-4511
to confirm availability and discuss your food processing needs.


ALARD item reference #: Y4248

Lyco 8700 POUCH COOLER, Y3979

Lyco Chill-Flow 8700
CONTINUOUS POUCH COOLER

y3979c_crop_email.jpg

A Lyco Chill-Flow Model 8700 rotary drum cooler, specifically engineered as a bag/pouch cooler. Submerged water cooling is the most efficient & economical method of cooling volumes of food products. Manufacturer literature recommended for pouches ranging from small packs of restaurant ketchup up to 5 or 10 pound bulk food service size. Applications include sauces, soups, chowders & pet food...

OPERATION:

Product enters the cylinder through an open throat, water-cushioned entry design that keeps pouches safely handled while being cooled. As they proceed through the rotary drum cylinder, the pouches / tubs are totally submerged in water, then gently stirred using Lyco's proprietary Hydro-Flow technology. This Lyco Hydro-Flow agitation keeps pouches suspended in motion which cools 40% faster than sitting statically on a belt conveyor. This method ensures product is quickly cooled all the way through to the center of the package.



FEATURES:

  • 72 inch diameter by 24 feet long cooling reel.

  • Removable 3/8 inch perforated screen.

  • y3979e_crop_email.jpg24 inch diameter open throat infeed.

  • Cushioned entry design ensures pouches are safely handled while being cooled.

  • Gentle "Hydro-Flow" water agitation keeps pouches suspended in motion which decreases cooling time.

  • Two way pivoting top cover with pneumatic cylinder power lift.

  • Built in CIP system including centrifugal pump for sanitation.

  • USDA sanitary stainless steel construction.

  • 230/460 volt 3 phase electrical input.

As of this writing, this Lyco Pouch Cooler is in stock at ALARD, in very good condition, being sold AS-IS and available for immediate shipment.



CALL 315-589-4511 to confirm availability, and to discuss your industrial food process cooking and cooling equipment needs.



ALARD item reference #: Y3979

VIBRATING FEED CONVEYOR, Y4090

VIBRATING CONVEYOR
/ DUAL-LANE VIBRATORY FEEDER...



y4090_crop_email.jpg



This FMC / ALLEN DIVISION Model VF Advance is a food grade stainless steel electromagnet impulse controlled shaker, vibrating feeder, vibratory conveyor, vibrating conveyor, vibratory inspection table...


FEATURES:

  • Stainless steel shaker bed measures 36 inch wide a 120 inch long, with 5 inch high stainless steel sides.

  • y4090a_crop_email.jpg

    Divided two-lane deck settable for one or two lance use via a 42 inch long diverter gate at the infeed end.

  • Last 42 inches of the vibrating deck has 3/8 inch perforations for screening out fines, or dewatering.

  • All food grade stainless steel shaker and pedestal mounted on a painted steel base plate.

  • 230 volt 3 phase electrical input.


As of this writing, this vibrating transfer inspection table is in stock at ALARD, being sold AS-IS for immediate shipment -OR- can be refurbished by our shop to EXCELLENT condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

Alard item reference #:Y4090

Bepex Rietz EXTRUCTOR RE-15, 25HP, Alard item Y4167

RIETZ EXTRUCTOR Model RE-15,
frozen block grinder, 25HP...


y4167zc_crop_email.jpg


A Rietz Bepex RE-15-K7E328 EXTRUCTOR industrial pulverizer machine, engineered with slow speed and high torque fracturing, crushing, grinding and tearing large frozen blocks or barrels of bulk materials, such as animal products, meats, cheese, fruits and/or vegetables...


FEATURING:

  • 22 inch wide by 24 inch long by 25 inch deep infeed hopper.

  • y4167za_crop_email.jpg73 inch infeed height.

  • 15 inch diameter rotor.

  • Hinged 9 spoke orifice front extruction plate.

  • Food grade sanitary stainless steel, including tubular frame.

  • Offset / side mounted 25 HP chain drive motor.

  • 460 volt 3 phase electrical input.



As of this writing, this Rietz RE15 Extructor is in stock at ALARD, in EXCELLENT mechanical & cosmetic condition, available for timely delivery.

CALL 315-589-4511 to confirm availability and discuss your industiral food process cutting, grinding, pulverizing & particle reduction needs.

ALARD item reference #: Y4167

Key Iso-Flo SHAKER-FEEDER, Y3651

Key Iso-Flo
VIBRATING FEEDER / VIBRATORY FEED CONVEYOR,
DEMO VIDEO...

Key Iso-Flo VIBRATING FEED CONVEYOR Y3651
from Alard Equipment Corporation.


A Key Iso-Flo vibrating shaker, vibratory conveyor for product conveying, and/or even-feeding food product to downstream food processing equipment.


FEATURES:

  • 73 inch long by 25 inch wide conveyor body with 5 inch high sides, tapering to a 21.5 inch wide discharge.

  • Stick-resistant dimpled / rigidized surfaces.

  • 56 inch infeed height, 51 inch discharge height.

  • All food grade stainless steel construction including frame and pedestal legs.

  • New springs.

  • New-style Key Iso-Flo eccentric, with 3 phase motor.


As of this writing, this vibrating conveyor is in stock at Alard in EXCELLENT operational, mechanical and cosmetic condition, ready to go and available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your particular food process conveying equipment needs.

Alard item reference #:Y3651

Urschel GRL VIDEO DEMO cutting yuca, Y3480

Urschel Model GRL
straight or crinkle cut
STRIP CUTTER
CUTTING CASSAVA / YUCA
Video Demo

Y3480_Urschel_GRL
cutting_yuca_cassava
from Alard Equipment Corporation.


A two-dimensional cutting machine designed specifically for strip cutting plain and crinkle cut potato strips and french fries, for longer cuts with greatly reduced fines.


FEATURES:

  • Manufacturer rates for potatoes up to 9 inches (230 mm) in length.

  • A two-dimensional cutter:
    • + Slice thickness knob adjustable up to 9/16 inch (14.3mm).
    • + Currently equipped with a 7/16 (11.1mm) inch crosscut knife spindle. Other crosscut spindles are available; --CALL ALARD at 315-589-4511 for current availability, and to dicuss your particular cutting specifications.

  • Aftermarket electrical control panel with safety interlock system, which cuts power to the machine if safety guards are removed.

  • Low maintanence, only two moving parts.

  • All stainless steel frame and shrouding.

  • New, dimpled surface, infeed chute.

  • "Urschalloy" slice shell and impeller.

  • 2 HP 3 phase drive.

As of this writing, this Urschel GRL potato strip cutting machine is in stock at Alard, in good operational condition, available for timely shipment.


CALL ALARD 315-589-4511
for current availability, and to discuss your particular industrial food process high-capacity fruit and vegetable cutting machine needs.


Alard item reference Y3480

Key Iso-Flo VIBRATING GRADER, Y4237

KEY Iso-Flo
VIBRATING DEWATERING SHAKER
/ VIBRATORY GRADER EVEN FEED CONVEYOR
VIDEO DEMO...


Key Iso-Flo vibratory SHAKER-GRADER Y4237
from Alard Equipment Corporation.



A Key Iso-Flo vibratory grading conveyor with quickly interchangeable screens for grading, size sorting, fines-removal, solids separation, dewatering, and even feeding downstream components...

FEATURES:

  • 48 inch wide by 134 inch long rigidized / dimpled solid surface grading bed, with...
    • 8.25 inch high stainless steel sides.
    • 24 inch long solid infeed section.
    • 24 inch long screen section (screen not included) with quick-release clamps.
    • 1 inch step down.
    • 23 inch long screen section (screen not included) with quick-release clamps.
    • 23 inch long solid discharge section.
    • 10 inch long slide-in style screen (not included).
    • 20 inch long solid surface discharge.

  • 77 inch high infeed and 66 inch high discharge as configured on pedestal legs.

  • Separate rigidized / dimpled stainless steel catch pans.

  • All food grade sanitary stainless steel construction.

  • Iso-Drive eccentric powered by 1 HP motor.

  • 208, 230, 460 volt 3 phase electrical input.

  • New springs, slats and screen clamps.

As of this writing, this vibratory shaker-grader si in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y4237


Safeline METAL DETECTOR video demo, Y4252

Safeline
FOOD GRADE METAL DETECTOR,
31x7 opening, with conveyor belt
VIDEO DEMO...



Safeline food METAL DETECTOR with conveyor belt, 31x7 opening, Y4252
from Alard Equipment Corporation.


A Mettler Toledo Safeline belt-transfer metal detection system with a new belt-transfer conveyor, for industrial food processing and packaging and / or other applications where detection of metal contamination is necessary...



FEATURES:

  • 31 inch wide by 6.75 inch high USABLE aperture opening with the conveyor belt in place (overall opening 8 inches high).

  • Aluminum search head enclosure, food-grade sanitary epoxy painted.

  • Newly poured wash-down grade epoxy sealed liner and water-resistant search head enclosure, for moist environment wet product applications, such as fresh produce / freshcut fruit and vegetable packing, and other industrial process applications.

  • Complete with integral, digital touchpad controls with multifarious product presets.

  • NEW food grade stainless steel metal-detector-through-CONVEYOR with 96 inch long by 27.5 inch wide interlocking plastic belt.

  • 34 inch working height on threaded-rod adjustable feet.

  • Integrated belt-stop alarm REJECT system, with new gasketed stainless steel control box, with top-of-box reject beacon light.

  • VARIABLE SPEED drive - VFD vari-speed controller with fractional HP conveyor belt drive.

  • 110 volt single phase (standard household current) electrical input.


As of this writing, this food process metal detection system is being prepared and will soon be available in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition.


CALL 315-589-4511 to confirm current availability and discuss your specific metal detection needs!

Alard item reference #: Y4252


About this Archive

This page is an archive of entries from June 2019 listed from newest to oldest.

May 2019 is the previous archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)