A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

February 2023 Archives

Heinzen model 2280 rotary CELERY CUTTER, Y5555

continuous, food grade sanitary, stainless steel.

Heinzen model 2280 rotary CELERY CUTTER, Alard item Y5555
from Alard Equipment Corporation.

A HEINZEN / HMI Model 2280 ROTARY CELERY CUTTER is an efficient high-capacity industrial length cut & butt machine for pre-cut produce / fresh-cut processing and packaging operations. Designed for celery but can also be used for food applications such as carrots, romaine lettuce, corn on the cob, zucchini or other oblong shaped produce.


  • Manufacturer rated for 2,000 - 3,000 pounds per hour production.

  • Rotating product belt for manual left side, right side or dual loading.

  • 21 inch wide infeed at 57 inch high.

  • Capable of cutting variable lengths in 1 inch increments:
    • Currently set for 4 inch segments with 2 inch butt trim.

    • 20 inch high front discharge for segment cuts.

    • Separate 22 inch long by 13 inch wide bottom discharge for butts.

  • 33 inch wide by 12 inch deep product shelf at 43 inch working height.

  • Hinged knife cover for ease of sanitation and maintenance.

  • Operator control panel with variable speed control, E-stop & safety interlock system.

  • Adjustable threaded rod feet.

  • 1.5 HP stainless steel shrouded drive motor.

  • All food grade stainless steel construction with open channel frame.

  • 230 volt 3 phase electrical input.

As of this writing, this length cutter is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process vegetable preparation / cutting equipment needs.

ALARD item reference #: Y5555

Scott Mixers HIGH-SHEAR BLENDER, Y5032


Scott Mixers food grade sanitary high-shear MIXER, Y5032
from Alard Equipment Corporation.

A sanitary stainless steel Scott Turbon Model HRS6B high shear mixer on a hydraulic ram/ pneumatic power lift. This full scale hydraulic ram mixer with an adjustable height mixing head, allows for processing of various batch sizes and viscosities, with rapid dispersion and emulsification of ingredients.


  • Scott Turbon Model B mixer head for viscous/ thick liquids and emulsions; large diameter with toothed disc mounted on a 53 inch long shaft.

  • Manufacturer rated for batch sizes up to 2000 gallons, for applications such as mixing salad dressings, thick emulsions or other viscous products in dispersion, dissolution, suspension, particle size reduction, homogenization and emulsification.

    • Other mixer heads are available from the manufacturer. CALL 315-589-4511 to discuss your specific blending / emulsifying requirements.

  • Combination hydraulic/ pneumatic lift operation - requires 120 psi air supply input.

  • Pivoting 85.5 inch long "swing arm" powered by 1/3 HP motor.

  • Food grade USDA sanitary stainless steel, 3A dairy sanitary construction - applicable beyond food & beverage for other uses such as pharmaceutical and biotech mixing, as well as for cosmetic and personal care products.

  • 60HP belt drive motor.

  • 460 volt 3 phase electrical input.

  • Controls not included.

As of this writing, this high-shear emulsifier blender is in stock at ALARD, in GOOD condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process emulsifying and blending needs.

ALARD item reference #: Y5032

Tamper-evident heat induction CAP SEALER, Y4068

Enercon SuperSeal...


An Enercon model LM448-21 induction cap sealer for in-line continuous automatic heat induction tamper evident cap sealing for food and beverage safety.


  • y4068_y3034b_crop_email.jpgQuick change sealing head included for 24mm to 38mm cap diameters.

  • Compact, modern, air-cooled system design.

  • Stainless steel head enclosure with integral touchpad operator control panel.

  • Stainless steel stand adjustable for height from 32 inches to 45 inches at the induction sealing head, to position over your existing container conveyor line.

  • Stalled bottle sensor and foil sensor included.

  • Manufacturer owner's reference manual included. 220 volt single phase electrical input.

As of this writing, this Enercon Super Seal INDUCTION CAP SEALER is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food packaging tamper prevention equipment needs.

Alard item reference #:Y4068

4-inch stainless steel FOOD PUMP, Y4408

CORNELL 4 inch

A Cornell Model 4NMP-2R stainless steel hydro-flow food pump with 4 inch inlet and outlet connections, uses water as a transport medium. The water supports and cushions the food product being handled, so the Cornell Hydro-Transport Food Pump is an excellent foundation for a pipe flume, open flume, wash flume, chill flume, disinfectant bath, or other water conveyor configuration for gently conveying high volumes of whole or cut food products in water at tons-per-hour volume capacities.


  • Cornell 4NMP-2R stainless steel hydro-transport food pump with single port stainless steel impeller, 4 inch inlet and outlet.

  • Manufacturer rated for approximately 100 to 800 gallons per minute depending on RPM and head resistance.

  • Whole or cut food solids handling ability for products up to 2.94 inch (74.7 mm) diameter by 4 inch (171.6 mm) long.

  • y4408g_crop_email.jpg4 inch flanged suction outlet and discharge outlet connections appropriate for 4 inch water pipeline. Other larger-diameter models are available, new and used, in-stock at Alard: - call 315-589-4511 for current availability.

  • Non-clogging single port impeller conveys in a cushion of water.

  • Food grade stainless steel pump and impeller, corrosion and abrasion resistant.

  • Designed and manufactured specifically to pump food products in water.

  • Alternative to belt conveyors

  • Economical for long distance conveying: Can convey food products several hundred feet, with very little floor space footprint; with less maintenance, more capacity, and less expense than a belt conveyor, screw conveyor, bucket elevator, or vibrating conveyor.

  • Conveys products vertically, horizontally, diagonally, some or all of the above in the same system.

  • Elevates products gently, without mechanical damage.

  • Replaces belt conveyors in many applications.

  • Mounted on a tubular steel frame - motor not included.

  • Preheat product before cutting, peeling, etc.

  • Hydro-cool product to remove field heat, after blanching, etc.

  • Apply additives (dextrose, SAPP, etc.) while conveying.

  • Gently wash while conveying.

  • Ideal for industrial food processing and packing applications, for chilling, cooling, washing, sanitizing and conveying food products in water. Typically used for frozen fruit and vegetable processing, in pre-cut produce, and fresh-cut salad processing, for berries, fruits, potatoes, root crops, squash, seafood, and most any compatibly sized food products that can be transported in water.

As of this writing, this refurbished Cornell hydro-flow food pump is in stock at ALARD, in GOOD OPERATING condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process food pumping system needs.

ALARD item reference #: Y4408

ROD BELT TAKEAWAY CONEYOR, food grade, stainless steel, Y5046



A 6 foot long by 15 inch wide rod belt Dunkley takeaway conveyor / grading belt, previously used with a Dunkley Cherry pitter (not included, available separately) to convey pitted cherries away from the pitting machine, with belt spacing to allow any loose pits to drop through. Ideal for it's original purpose, but could as well be used as a cleaning / grading conveyor (which would allow fines to drop through), a feed conveyor, takeaway conveyor, or transfer conveyor for a wide range of raw, peeled, or cut fruits and vegetables, and/or packaged food products in a pre-cut produce packing or other industrial food manufacturing process environment. The open belt could also be set over a tank as a dewatering conveyor, and / or used with overhead sprays (not included) for rinsing or washing food products.


  • y5046f_crop_email.jpg72 inch long by 15 inch stainless steel rod belt, with 3/16 inch rods on spacings allowing for 3/8 inch openings.

  • The belt runs between stainless steel sides that flare out to a width of 20.5 inches.

  • All food grade stainless steel construction, with corrosion resistant plastic bearing blocks, 4 inch diameter plastic belt pullies, and stainless steel shafts.

  • Fractional HP 208/230/460v 3 phase drive 1725 RPM drive with 50:1 gear reducer.

  • Did not come with, does not include a bottom catch pan or legs, but we can fabricate to buyer specification at extra charge. Can be configured as an elevating conveyor, horizontal conveyor, or lowerating conveyor, per customer requirement. CALL 315-589-4511 to discuss your bulk food product handling needs.

As of this writing, we have this stainless steel rod-belt conveyor in stock in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment; --and we have multiple matching Dunkley cherry-pitter takeaway conveyors identical to this that could be gotten ready quickly.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y5046

Food Process METAL DETECTION SPECIALISTS, Alard Equipment Corp

Food Process Metal Detector Specialists
Alard Equipment Corporation, Williamson, NY

Alard Equipment Company, Williamson, NY
February 2023


  • Large Inventory of ready-to-go metal detectors IN STOCK available for immediate shipment

  • NEW, Refurbished, good operational used, in-stock, available for immediate shipment.

  • Belt transfer, Pipeline, Drop-Thru (aka Gravity Fall), in-stock available for immediate shipment.

  • REJECT systems can be customized to customer specification.

Call 315-589-4511 to discuss your Food Process Metal Detection needs.

Link to FoodMetalDetector.TV

SEE Food Metal Detector TV

Video demo, slice washer, preservative solution DIP TANK, Y4280

preservative solution DIP TANK
food grade stainless steel,

Pease apple_slice_washer, rinser, preservative_solution DIP TANK
from Alard Equipment Corporation.

A food preservative application rinse and wash tank with elevating discharge conveyor, designed for whole or cut apples, or other fruit & vegetable product requiring washing, rinsing and/or immersion in preservative or chlorinated disinfectant solution as part of a fresh market produce packing or other industrial food procesing and packaging line...


  • Stainless steel wash tank measures 16 inch wide by 96 inch long by 10 inch deep with 2.25 inch threaded drain.

  • Stainless steel elevating discharge conveyor with 15 inch wide by 6.5 inch deep flights.

  • 12 inch diameter paddel wheel for full immersion.

  • 12 inch infeed height, 60 inch discharge height.

  • All sanitary food grade stainless steel construction.

  • 230/460 volt 3 phase electrical input.

As of this writing, this apple dip tank washer is in stock at ALARD, in GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4280

JET-FLOW WASHER for fruits and vegetables, food grade, stainless steel, Y4499

food grade stainless steel.


A turbulent-flow IMMERSION WASHER FLUME with water-jet agitation for gentle but forceful washing of whole or pre-cut fruits and vegetables, including cut or whole leafy greens such as delicate leaf products like spinach, baby spinach, spring mix and other fresh-cut produce food products...


  • Tank measures 26.5 inch wide by 25 inch deep by 116 inch long.

  • Rounded bottom with two (2) removable bottom screens with 3/16 inch perforations for the collection of stones, sand, etc.

  • Three (3) infeed end water sprays to promote forward movement of the products.

  • y4499q_crop_email.jpgEleven (11) adjustable water injection ports to create agitation and forward movement of products in the tank.

  • Air pump feeds fourteen (14) air injection ports to promote additional agitation of the product for a more effective washing process.

  • Stainless steel centrifugal water pump with 4 inch diameter inlet and 2 inch diameter discharge.

  • Water and product are discharged by a 10 inch long by 22 inch wide discharge section on the end of the wash tank.

  • Equipped with a 8.5 inch diameter by 21 inch deep bag filter.

  • All food grade stainless steel construction.

  • 3 phase electrical input.

As of this writing, this vortex washer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your fresh-cut produce packing and process equipment needs.

ALARD item reference #: Y4499

About this Archive

This page is an archive of entries from February 2023 listed from newest to oldest.

January 2023 is the previous archive.

March 2023 is the next archive.

Find recent content on the main index or look in the archives to find all content.

JOIN our

Email list!
Email PRIVACY explanation link!

6483 Lake Avenue
Williamson, NY  14589
315-589-3871 (fax)