COMMERCIAL SLICER
26 INCH cutting disk,
industrial-capacity, food grade, stainless steel,
vegetable SLICER / SHREDDER / STRIP CUTTER,Coleslaw cutter, sauerkraut cutter...

A Commercial Slicer Model 26NS, also known as a "Waterfall" slicer or Kibbey cutter, has long been the mainstay of the coleslaw and sauerkraut industries. Manufacturer recommended for lettuce, cabbage, onions, peppers, cucumbers, potatoes, carrots, tomatoes and celery.

FEATURES:

• 26 inch diameter aluminum frame cutting disk with stainless steel knives; 100% cutting surface.
  
  
• "Three cup" counter-rotating aluminum carrying arm pusher-plow to prevent rolling and maximize throughput capacity.
  
  
• Open infeed to easily accept heads of cabbage, lettuce and other whole vegetable products (up to 9 inch diameter).
  
  
• Manufacturer rated for up to 25,000 pounds per hour, depending on cut size and product.
  
  
• A range of cutting disk and blade configurations are available for one and two-dimensional cutting (slices, strip cuts, julienne cuts) in thicknesses from 1/32 to 2 inch and up to 5 inch in length. Grater blades are also available for shredding carrots, slaw, onions, and other fresh vegetables. CALL 315-589-4511 to discuss your particular industrial food process vegetable cutting / cut size specification.
  
  
• Food grade stainless steel construction, including tubular stainless steel frame.
  
  
• Complete with two (2) 1.5 HP stainless steel shrouded gear-motor drives - one for main cutting wheel and the other powers the plow.
  
  
• Stainless steel control panel with safety interlock system, emergency stop and safety lock-out.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this industrial capacity slicing and strip cutting machine is in stock NEW, needing only completion with cutting knives to buyer specification prior to shipment. 

CALL 315-589-4511 to confirm availability and discuss your food process fruit and vegetable slicing, shredding, and strip cutting needs.

ALARD item reference #: Y5338

ROTARY DRUM BLANCHER,
48 inch diameter by 16 foot long,
stainless steel...

A hot water rotary blancher for pasta, rice, dry beans, green beans, carrots, corn, mushrooms, beets, potatoes, sous vide, and many other vegetable & fruit products with through-put rates dependent on product density and hold times. Hot water rotary blanchers are manufacturer rated for uniform heating and controlled transfer, and gentle agitation, with easy to clean sanitary construction, and high capacity in a small footprint.

FEATURES:

• 16 foot long blancher zone.
  
  
• 1/16 inch drum screen perforations.
  
  
• Paddle discharge with perforated chute & catch pan water return.
  
  
• Food grade USDA sanitary stainless steel construction with removable screen panels for cleaning and sanitation.
  
  
• Hydraulic powered cylinder one-way cover lift.
  
  
• 208 / 230 volt 3 phase electrical input control panel - included AS-IS.
  
  
• Last use for blanching peas.

As of this writing, this hot water rotary blancher is in stock at ALARD, in EXCELLENT condition with timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular blanching needs.

ALARD item reference #: Y5560

GOOSENECK CONVEYOR,
ELEVATING FEED BELT CONVEYOR,
16 inch wide cleated belt,
food grade, stainless steel...

Bock / North Star Engineered Products goose-neck elevating belt feed conveyor with flighted belt, to even-feed fruit and vegetable products including apples, beets, carrots, cucumbers, potatoes, onions, beets and other root crop vegetables. Useful as a peeling machine feed conveyor, inspection conveyor feeder, and widely applicable to feed all manner of downstream food processing or packaging equipment in the context of a fresh-cut, pre-cut, produce packing or other industrial food processing production line.

FEATURES:

• 20 inch wide by 36 inch long tapered stainless steel in-feed hopper, 39-inch infeed height.
  
  
  • Infeed end is configured to "mate" with an inspection table, available separately; --Call 315-589-4511 to confirm availability and get more details on our Y5551 or Y5552 inspection conveyors.
    
    
• 16 inch wide cleated belt with 3 inch high cleats on 12 inch centers.
  
  
• Gooseneck style conveyor with:
  
  
  • 86 inch long incline section.
    
    
  • 36 inch long horizontal discharge section.
    
    
  • 72 inch discharge height.
    
    
  • 5 inch high stainless steel sides.
    
    
• Open channel stainless steel frame with locking casters.
  
  
• Food grade sanitary stainless steel construction.
  
  
• Top mounted 1/2 HP drive motor.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this elevating belt conveyor with hopper in-feed is in stock at ALARD in very good operational condition, and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing needs.

ALARD item reference #: Y5564

Kason DEWATERING SIEVE for solids-liquid separation, food grade, stainless steel...

This Kason Cross-Flo STATIC DEWATERING SIEVE, Model CF-4854-SS stationary screen is a static liquid-solids separator screen for waste-water recovery, water reclaim, and/or recapturing products such as peas, beans, corn, diced or chopped vegetables from washing, chilling, or rinsing flume water. The Kason hydrosieve water reclaim screen is also useful for rough screening of process water to remove stems, seeds, peels, pods, sticks, leaves, meat waste, and other food waste or foreign material in water recovery reuse; --and/or to reduce municipal costs and fines from BOD, TSS and/or TKN in your plant waste water.

FEATURES:

• Water sifting hydro-screen measures 48 inches wide by 52 inches long.
  
  
• Threaded rod adjustable pitch screen with .040 inch sieve openings.
  
  
• Solids run off the bottom of the screen:
  
  
  • 45 inch long by 48.5 inch wide solids discharge chute tapers to 40 inches wide.
    
    
  • Two (2) 18 inch pneumatic cylinders control angle of discharge.
    
    
  • Manual Up / Down control.
    
    
  • Compressed air input required for power assist screen angle adjustment operation.
    
    
• Overhead waterfall disperses product evenly across the entire screen for optimal laminar flow.
  
  
  • Two (2) 3 inch diameter inlets with Tri clamp connections.
    
    
  • Chambered to allow operation of left only, right only or blend of both inlets.
    
    
• 8 inch diameter cleanout access on each side - allows access behind the screen.
  
  
• 6 inch diameter filtered liquid outlet with Tri-clamp connection.
  
  
• All food grade sanitary stainless steel construction.

As of this writing, this Kason hydrosieve waste-water recovery screen is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your waste water handling needs.

ALARD item reference #: Y5498

Z-SHAPED
ELEVATING BELT CONVEYOR,
20 inches wide flighted belt, food grade stainless steel...

VIDEO DEMO
Z-conveyor, food grade, stainless steel, Y4311
from Alard Equipment Corporation.

A Z-CONVEYOR, food grade, stainless steel, with a solid interlocking plastic chain belt with curved cup shaped cleats.

FEATURING:

• Z-shaped belt conveyor configuration:
  
  
  • 26 inch long horizontal infeed section.
    
    
  • 44 inch vertical incline section.
    
    
  • 26 inch horizontal discharge section.
    
    
  • 18 inch infeed height.
    
    
  • 45 inch discharge height.
    
    
• 20 inch wide interlocking plastic chain type cleated conveyor belt with 4 inch high cupped cleats on 8 inch centers.
  
  
• All stainless steel conveyor body including legs.
  
  
• Fractional horsepower 3 phase belt drive.
  
  

As of this writing, this Z-belt conveyor is in stock at Alard in VERY good operational, mechanical and electrical condition, available for immediate service and shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular elevating feed belt conveyor needs.

Alard item reference #: Y4311

BELT CONVEYOR, 25x8,
food grade, stainless steel.

DEMO VIDEO
CONVEYOR BELT, 25 feet long,
food grade, stainless steel,
in stock, item #:Y4017
from Alard Equipment Corporation.

A food grade stainless steel frame conveyor belt, complete with drive.

FEATURES:

• 8 inch wide by 25 foot long conveyor belt.
  
  
  • Food grade white rubber belt.
    
    
  • Approximately 50 feet per minute.
    
    
• 4 inch high stainless steel sides.
  
  
• Control box with ON/OFF switch.
  
  
• 25 inch minimum / 41 inch maximum working height - mounted on adjustable height legs with locking casters.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 1/2 HP drive motor.
  
  
• 110 / 220 volt single phase electrical input.

As of this writing, this conveyor belt is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food conveying needs.

ALARD item reference #: Y4017

ELEVATING SCREW CONVEYOR, HOPPER, SCREW-FEEDER,
 11x16 incline auger,
food grade, stainless steel,
7 foot discharge height.

DEMO VIDEO
ELEVATING SCREW CONVEYOR, HOPPER-FEEDER
food grade, stainless steel, Alard item Y4978
from Alard Equipment Corporation.

An MTC Model MTC16-11 hopper inclined SCREW-FEEDER to elevate and convey raw or processed food product from in-feed to down-line food processing equipment, such as peeling, dicing, or packaging equipment. An 11 foot long by 16 inch food grade, stainless steel, screw-auger elevating conveyor with safety grid.

FEATURES:

• Tapered infeed hopper measuring 60 inches long by 60 inches wide by 52 inches deep with top stainless steel safety grid.
  
  
• 11 foot long by 16 inch diameter screw auger with flights on 16 inch centers.
  
  
• Screw trough equipped with full-length bolt-on stainless steel safety shroud.
  
  
• 50 inch infeed height / 76 inch high discharge.
  
  
  
• All food grade sanitary stainless steel construction including new legs.
  
  
• 3 HP motor with reducer and shrouded chain drive geared for 90 rpm.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this refurbished incline auger feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process bulk food product equipment needs.

ALARD item reference #: Y4978

Urschel Model GRL
FRENCH FRY CUTTER, STRIP CUTTER,
DICER...
 

The Urschel GRL is designed specifically for strip cutting plain and crinkle cut potato strips / French fries for longer cuts with greatly reduced fines.

FEATURES:

• Manufacturer rates for potatoes up to 9 inches (230 mm) in length.
  
  
• A two-dimensional cutter:
  
  
  • Slice thickness knob adjustable up to 9/16 inch (14.3mm).
    
    
  • INCLUDES one-set of cutting parts we have in stock, to be installed prior to shipment.
    
    
    • A variety of refurbished cross cut spindles are available - CALL ALARD at 315-589-4511 for current availability and to discuss your particular cutting specifications.
      
      
• Low maintenance - only two moving parts.
  
  
• Aftermarket electrical control panel with safety interlock system (cuts power to the machine if safety guards are removed) to be installed prior to shipment.
  
  
• Stainless steel frame and shrouding.
  
  
• New dimpled / non-stick surface infeed chute.
  
  
• "Urschalloy" slice shell and impeller.
  
  
• 2 HP drive 3 phase motor.
  
  
• 208/230/460 volt electrical input - please let us know your voltage requirements.

As of this writing, this Urschel GRL potato strip cutting machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL ALARD 315-589-4511 for current availability and discuss your particular industrial food process high-capacity fruit and vegetable cutting machine needs

ALARD item reference #: Y4787

Bruynooghe
VIBRATORY FEED CONVEYOR,
ALIGNER, 118 x 39,
food grade, stainless steel...

DEMO VIDEO
VIBRATING DEWATERING SHAKER ALIGNER, Y4689
from Alard Equipment Corporation.

A Bruynooghe DEWATERING SHAKER-ALIGNER, four deck / three step vibrating feeder, orients elongated fruit & vegetable products into a single direction. An aligning feeder for food products such as green beans, carrots, peppers, pickles, cucumbers, celery, zucchini, leeks, french fries and other strip cuts, stick cuts and more.

FEATURES:

• 39 inch wide by 118 inch long
  
  
• 13.75 inch long solid infeed.
  
  
• Three (3) screen sections:
  
  
  • 19.25 inch long each.
    
    
  • 1/8 inch rods and 3mm sieves -- rods are inline with flow.
    
    
  • 1/4 inch step down between each screen section.
    
    
• 3 inch drop to six (6) lanes.
  
  
  • Four (4) individual 1.25 wide aligners per lane..
    
    
  • Last 8 inch is angled down to more gently convey product downstream.
    
    
• 97 inch high infeed, 88 inch discharge height
  
  
• All food grade sanitary stainless steel construction.
  
  
• Vibratory action provided by two (2) 2.5 HP rotary / eccentric vibrator  motors.
  
  
• 575 volt 3 phase electrical input (optional transformer available separately).
  
  

As of this writing, this vibrating shaker/aligner is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y4689