WASTE-WATER RECLAIM REEL,
food grade stainless steel

A RECLAIM REEL and TANK is an integral part of any hydro-food pumping system, for liquid-solids separation, removing primary waste such as peels, leaves, stems, seeds and other by-products from flume or wash water, for recirculation, reuse, or clean disposal. The food process water recovery reel can also be used as a water reservoir for the pumping system or as part of a flume system. Commonly used as a continuous active water strainer for fresh-cut, fruit, potatoes, root crops, squash and other food applications.

FEATURES:

• Single 14 inch by 31 inch long drum.
  
  
  • 1/16 inch (1.6mm) screen perforations.
    
    
  • 3 inch high internal spiral to provide positive discharge of solids from the scavenger reel.
    
    
  • Overhead spray bar header.
    
    
  • Open ended straight-thru infeed / discharge design.
    
    
• 4 inch diameter infeed pipe with Triclamp connection.
  
  
• 23 inch wide by 31 inch long by 30 inch deep tank with float valve, 4 inch diameter overflow bottom outlet and 2 inch diameter threaded drain.
  
  
• 4 inch diameter flanged connection side bottom solids discharge with spray bar header.
  
  
• All food grade stainless steel construction with mild steel reel end plates.
  
  
• 3 phase drive motor.

As of this writing, this process water reclamation reel is in stock at ALARD, in GOOD condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process water recovery needs.

ALARD item reference #: Y4449

URSCHEL DIVERSACUT 2110
HIGH CAPACITY DICER, DICING MACHINE...

An Urschel Model 2110 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision.

MANUFACTURER SPECIFICATIONS:

• Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.
  
  
• Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.
  
  
• Crosscut knife -- change part:
  
  
  • Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)
    
    
  • Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
    
    
  • "Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
    
    
  • V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).
    
    
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips,. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• Manufacturer rated for input size up to 10 inches (254mm) in any dimension which reduces need to pre-cut product; --but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine requirements.
  
  
• This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie and candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!
  
  

FEATURES:

• Eight (8) paddle impeller for 5.5 inch maximum product input.
  
  
• 5 HP stainless steel shrouded drive motor with variable speed control.
  
  
• Factory stainless steel operator control panel with safety interlock system.
  
  
• Lube cluster for ease of maintenance.
  
  
• All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y5082

ERIEZ MAGNETIC PIPELINE METAL TRAP,
food grade, stainless steel, 4-inch.

An Eriez INLINE MAGNET for capturing stray ferrous metals from liquid and slurry food product flows in industrial food processing applications...

FEATURES:

• 4 inch diameter inlet / discharge port with threaded connections, four 4-inch pipeline, or could be necked down for smaller..
  
  
• Chamber measures 6.5 inch diameter by 8.5 inch deep.
  
  
• Removable interior trap with six (6) 1 inch diameter by 8 inch long rare earth magnets spaced 1 inch apart in semi-circular pattern, perpendicular to flow, to remove ferrous metals from pumpable food products including oils, slurries, pastes, sauces, salsa, and other liquid food products.
  
  
• Includes separate non-magnet plate for use when magnetic trap is not installed.
  
  
• All food grade sanitary stainless steel construction.

As of this writing, this tramp metal eliminator is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL ALARD at 315-589-4511 to confirm current availability and discuss your particular food process metal detection needs.

ALARD item reference #: Y4716

Urschel Model SL-A DICER,
strip cutter, slicer...

A 3-dimensional dicing machine designed for cutting cooked and raw frozen-tempered meats including beef, pork & chicken. Also capable of handling cabbage, onions and other firm produce with continuous operation for uninterrupted production...

Three cutting dimensions:

• Maximum firm product input size 4 inches (101.6 mm) in any dimension.
  
  
• Slice thickness: up to 1/2 inch (12.7 mm) -- knob adjustable.
  
  
• Circular knife cuts: 1/8 to 2 inch (3.2 to 50.8 mm) -- knives & spacers determine.
  
  
• Crosscut knife cuts: ? inch to 3 inch (3.2 to 76.2 mm) -- change part.
  
  
• By removing the crosscut knife and / or the circular knife spindle(s), the Urschel SL-A cutter can also cut strips (two-dimensional cuts) and slices (single dimensional cut).
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement!
  
  

FEATURES:

• 5 inch slice shell opening.
  
  
• Four (4) paddle impeller.
  
  
• Factory control panel with safety interlock system.
  
  
• 2HP drive with brakemotor powers slice head.
  
  
• 2HP drive motor with mechanical variable speed control powers circular and crosscut spindles.
  
  
• All food grade USDA sanitary stainless steel construction.
  
  
• 460 volt 3 phase electrical input.
  
  

As of this writing, this Urschel SL-A dicer is in stock at ALARD in good operational, mechanical, and electrical condition, available for timely service and shipment.

CALL 315-589-4511 to confirm availability and discuss your high-capacity food process cutting machine needs.

ALARD item reference #: Y4782

SINGLE PISTON VOLUMETRIC FILLER / DEPOSITOR.

An IWKA Model DF-20 pneumatically operated food grade stainless steel single piston filling machine for filling containers or use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Fills viscous liquids such as sauces, creams, pastes, and oils, including products with particulate such as salsa.

FEATURES:

• 23 inch diameter by 26 inch high (approximately 20 gallon) infeed hopper with 3 inch triclamp outlet.
  
  
• Pneumatically powered piston, in a 3.75 inch diameter by 14 inch long cylinder, crank adjustable for up to 68 ounces nominal fill per stroke.
  
  
• 2 inch diameter discharge.
  
  
• Food grade sanitary stainless steel product contacts with pedestal frame and adjustable height.
  
  
• Equipped with a remote foot switch for semi-automatic operation.
  
  
• 220 volt single phase electrical input.
  
  
• Requires compressed air input for operation.

As of this writing, this piston filler is in stock at ALARD, in EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5066

WAUKESHA Model 45 Universal 2 series
SANITARY POSITIVE DISPLACEMENT PUMP.

A Waukesha Cherry-Burrell sanitary positive displacement LOBE PUMP, manufacturer recommended for pumping viscous fluids, slurries, or particulate bearing liquids in industrial food, dairy, canning, bakery, beverage and pharmaceutical processing applications...

FEATURING:

• 2.5 inch inlet and discharge ports with clamp connections in a horizontal flow orientation.
  
  
• USDA / 3A dairy sanitary food grade pump with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.
  
  
• Approximately 58 gallons-per-minute throughout (depending on product viscosity and head pressure).
  
  
• Manufacturer rated for up to 600 RPM and 450 psi working pressure.
  
  
• This pump has very close tolerances, and is recommended for ambient or cool product applications.

As of this writing, this Waukesha lobe pump is in stock at Alard, in EXCELLENT operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process pump and bulk material handling needs.

ALARD item reference #: Y4951

FOUR ROLL WASHER / SCRUBBER / PEELER,
for fruits and vegetables,
4-roll, stainless steel, continuous,
in-stock NEW...

A continuous four roll peeler-washer which can be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and others.

OPERATION:

Raw product is continuously fed to the peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action is provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine.

FEATURES:

• 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.
  
  
• Lubricating and rinsing action is provided in the chamber via a stainless steel water spray pipe header with spray nozzles.
  
  
• Peeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler /washing exposure; --at a 39 inch discharge height.
  
  
• Water, peels and debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet.
  
  
• Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing).
  
  
• Shows in pictures with four (4) abrasive rolls, each 6 inch diameter by 6 foot long; but can be set with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeler / scrubbing action.
  
  
• The abrasive brush rolls are mounted parallel (in-line) with product flow.
  
  
• Complete with central lubrication cluster for ease of maintenance.
  
  
• Chain / sprocket drive powered by a 3HP 208/230/460 volt 3 phase 60 cycle constant speed motor.
  
  
• We recommend an optional "soft start" variable speed controller in a gasketed PVC NEMA 4 control box.

As of this writing, this machine is IN STOCK NEW at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fruit and/or vegetable peeling and washing equipment need.

ALARD item reference #: Y5104

HOT WATER ROTARY BLANCHER,
8 x 4, 8x48, stainless steel...

This A.K. Robins blanching machine, is a USDA sanitary stainless steel rotary drum blancher for vegetables, pasta, dry beans, pet foods, and a variety of food products in an industrial food processing and production line context...

FEATURING:

• 48 inch (4 foot) diameter by 8 foot long stainless steel blancher reel.
  
  
• 1/8 inch screen perforations in rotary blanching drum with removable 16 inch wide cleanout door for sanitation.
  
  
• Steam injection sparge at infeed end.
  
  
• Hinged, counterweighted top cover.
  
  
• 17 inch wide flume infeed at 5 foot in-feed height.
  
  
• Paddle lift discharge to dimpled chute with 31 inch discharge height.
  
  
• Two (2) 12 inch diameter bottom-end clean out plates.
  
  
• Variable speed 5 HP chain drive.
  
  
• 5 HP centrifugal CIP / FLUME pump with 2 inch inlet and 1.5 inch outlet..
  
  
• USDA food grade sanitary stainless steel construction.
  
  
• 230 volt 3 phase electrical input.
  
  

As of this writing, this hot water rotary blanching machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process cooking and blanching equipment needs.

ALARD item reference #: Y5090

URSCHEL DIVERSACUT 2110 DICER...

An Urschel Model 2100 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision...

MANUFACTURER SPECIFICATIONS:

• Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.
  
  
• Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.
  
  
• Crosscut knife -- change part:
  
  
  • Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)
    
    
  • Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
    
    
  • "Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
    
    
  • V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).
    
    
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips,. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• Manufacturer rated for input size up to 10 inches (254mm) in any dimension which reduces need to pre-cut product; --but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine requirements.
  
  
• This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie/candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!

FEATURES:

• Came set for flat slice dices (would require significant change parts for crinkle cuts); -- other cutting parts available from the manufacturer. CALL 315-589-4511 to discuss YOUR food process cutting machine specifications.
  
  
• 5 HP stainless steel shrouded drive motor,
  
  
• Factory stainless steel operator control panel with safety interlock system.
  
  
• All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y5165

60 CUBIC FOOT (450 gallon)
DUAL SHAFT DOUBLE RIBBON BLENDER,
with slide-gate discharges, food grade, stainless steel...

An A & M Process Equipment Model DRB-600 twin-shaft double-ribbon mixer with discharges for dry or granular food products...

FEATURES:

• 53 inch wide by 84 inch long by 36 inch deep "W" shaped / two-trough vessel, with a double-ribbon agitator in each trough.
  
  
  • The ribbon agitators each consist of 25 inch diameter double-helix 1.75 inch by 1/4 inch ribbons outside 3 inch diameter shafts with pneumatic glands.
    
    
• Complete with new 6 inch by 6 inch square air-operated center bottom discharge outlet in each U-trough.
  
  
• Complete with hinged covers with safety / pour grids.
  
  
• Each ribbon shaft has it's own 10HP 3 phase drive with gear reducer and chain-and-sprocket drive configuration.
  
  
• Food grade, sanitary stainless steel construction.
  
  
• 71.5 inch infeed height, 31.5 inch discharge height.
  
  
• Overall dimensions: 113"L x 60"W x 96"H.

As of this writing, this twin-shaft double ribbon mixer is IN stock at Alard, in EXCELLENT mechanical, operational electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process blending equipment needs.

Alard item reference #:Y0850

FOOD PROCESS METAL DETECTOR with BELT CONVEYOR,
20x11 opening, stainless steel...

FOOD METAL DETECTOR with conveyor belt, 20x11 opening,
all food grade stainless steel, in-stock new, Alard item Y5013

A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed stainless steel conveyorized metal detection system for industrial process applications, with...

FEATURES:

• 10 7/8 inch (275mm) high by 19 11/16 inch (500mm) wide net USEABLE aperture opening with the conveyor belt in place...
  
  
• The 304 stainless steel frame washdown belt transfer conveyor has a 86 inch (2.184 meters) long by 17 9/16 inch (450mm) wide interlocking plastic chain type belt, running at a 30 inch (762mm) working height, with adjustable feet allowing +/- 4 inch (100mm) height adjustment.
  
  
• The thru-conveyor is complete with a belt-stop alarm reject configuration, and a variable-speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.
  
  
• A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).
  
  
• The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.
  
  
• 110 volt single phase (standard household current) electrical input.
  
  
• FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.
  
  
• Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation, however we have tested this head with dry product for a sensitivity of 1.5mm ferrous, 1.5mm non ferrous, and 2mm stainless steel at 300 kHz.
  
  
• Quick teach feature learns new products in 4 to 7 passes.
  
  
• The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.
  
  
• Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance.
  
  
• USDA food grade sanitary wash-down stainless steel search head and conveyor construction.
  
  
• NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.

As of this writing this metal detection system is in stock NEW at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #: Y5013

T.S. DESIGNS TRIPLE-WASH
3-section GREENS WASHER
for leafy greens such as
spinach, lettuce, cabbage, and mixed greens...

DEMO VIDEO
TS Designs Triple-Wash leafy GREENS WASHER Y5135
from Alard Equipment Corporation.

The Triple-Wash multi-stage immersion washer is a food grade stainless steel immersion washer / leafy vegetable washer, with a full-length belt running through a three-dip wash water tank, with overhead sprays and reciculation pumps.

FEATURES:

• 12 foot long by 4 foot wide product conveyor belt runs through all three sections.
  
  
• Manufacturer rated for 3,000 lbs of loose-leaf lettuce per hour.
  
  
• (2) stainless steel recirculation pumps.
  
  
• (2) static water reclaim screens to filter out stems, seeds and other fines from the recirulating wash water
  
  
• Overhead sprays along full length.
  
  
• First wash section has it's own overhead spray section, pump and water recovery hydrosieve screen, sections two and three share a common pump overhead sprays, and hydrasive screen.
  
  
• Tapered discharge chute sized to drop into a "Brute" spin dryer basket. Note: basket, spin dryer not included but may be available separately. Call 315-589-4511 to discuss your leafy greens washing machine application.
  
  
• Food grade sanitary stainless steel greens washer.
  
  
• 500 gallon water capacity.
  
  
• 3/4 HP conveyor belt drive.
  
  
• Gentle tumble and spray washing through three wash baths, for gentle cleansing of delicate greens.

As of this writeup, this three-section greens washer is in stock at Alard, in very good operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference: #Y5135