VOLUMETRIC AUGER FEEDER with HOPPER,
1.5 inch diameter feed tube, bulk solids metering feeder, food grade, stainless steel...

DEMO VIDEO
AccuRate 600 Bulk Solids Metering Feeder, Y5711
from Alard Equipment Corporation.

A Schenck AccuRate 600 series "Tuf-Flex" mass flow hopper, dry ingredient feeder, is designed to handle virtually any dry material, including fine powders, granules, flakes, fibers, dry coatings, spices, seasonings, chips & pellets, without packing or bridging. The product feed hopper features a flexible vinyl chamber which is externally massaged for continuous even flow of uniform material. AccuRate Volumetric Series Feeders are manufacturer rated for industrial process applications including food, pharmaceutical, chemical, plastics and more.

FEATURING:

• Manufacturer rated for +/- 0.5% to 3.0% accuracy - depending on materials & flow rate.
  
  
• 30 inch square by 30 inch deep tapered stainless steel hopper.
  
  
  • Flexible vinyl feed chamber with external thumpers.
    
    
  • Solid stainless steel cover.
    
    
  • 24 inch long feed tube.
    
    
  • 1 1/8 inch diameter auger.
    
    
• 79 inch high infeed, 38 inch discharge height.
  
  
• Stainless steel stand.
  
  
• 1/4 HP drive with 3-speed controller.
  
  
• 110 volt single phase electrical input.

As of this writing, this volumetric feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing equipment needs.

ALARD item reference #: Y5711

ROBINS DRAGO DESTONER
riffle-board WASHER, Model TME,
food grade, all stainless steel...

VIDEO DEMO
Robins-Drago DESTONER, tramp metal eliminator Y3612
from Alard Equipment Corporation.

The Robins Drago washboard tramp metal eliminator (TME) is designed to remove foreign materials such as rocks, stones, pebbles, gravel, sand, glass, bone, and / or metal contaminants as small as .020 inch in size, as long as the food product is less dense than the foreign matter and the specific gravity of the foreign matter is less than one. Manufacturer recommended for dried beans, vegetables, fruits, pickles, seafood and many other destoning applications.

FEATURING:

• Manufacturer rated for a maximum throughput of approximately 7,000 to 10,000 lbs per hour.
  
  
• 24 inch wide by 56 inch long riffle board type operation.
  
  
• Flush lift lever for debris removal and/or daily sanitation practices.
  
  
• 36 inch wide by 88 inch long by 36 inch deep tank.
  
  
  • Side mounted tank catches trash/stones dislodged from the riffle troughs.
    
    
  • Three (3) 4 inch diameter brass valves - inlet, outlet & side tank.
    
    
• 24 inch wide by 64 inch long wire woven stainless steel elevating discharge belt.
  
  
• NEW 2-inch submersible water circulation pump - approximately 150 gallons per minute.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 3/4 HP chain drive washdown motor.
  
  
• 208/230/460 volt 3 phase electrical input.

As of this writing, this riffle board destoner is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food washing needs.

ALARD item reference #: Y3612

IMMERSION WASHER for PRODUCE,
with AIR INJECTION for TURBULENT washing,
food grade, stainless steel.

DEMO VIDEO
Heinzen IMMERSION WASHER,
for fruit & vegetable products, air injected, turbulent flow, Y5285
from Alard Equipment Corporation.

The Heinzen Model FW30 is a versatile turbulent washer for almost any pre-cut / fruit or fresh-cut vegetable product with air injection for increased removal of bugs, dirt, and other detritus, using ambient or chilled water. This immersion washer, with forced air bubbles, is like a gentle Jacuzzi bath for your whole, sliced, diced, fruits and vegetables, and / or leafy vegetables.

WASHER:

• 26 inch wide by 13.5 foot long main tank.
  
  
• Two (2) air injection sections.
  
  
• Two (2) 8 inch wide stone traps.
  
  
• Plastic interlocking chain top belt:
  
  
  • 1/2 inch by 3/8 inch openings for removal of floating fines.
    
    
  • Two (2) immersion sections.
    
    
  • Fractional horsepower roller drive.
    
    
  • Belt lifter for ease of cleaning & sanitation.
    
    
• Two (2) 6 inch wide skim troughs.
  
  
• Side mounted 48 inch long by 8 inch wide hydrosieve screen effectively filters wash water of leaves, stems, fines & other debris resulting from the washing process.
  
  
• Air pump powered by a 5HP stainless steel shrouded motor.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208/230/460 volt 3 phase electrical input.

Cornell Model 4WB CENTRIFUGAL RECIRCULATION PUMP:

• Manufacturer rated for 300 to 500 gallons per minute.
  
  
• 7 inch diameter bronze impeller with double curvature vanes.
  
  
• Stainless steel volute.
  
  
• 5 inch diameter inlet / 4 inch diameter outlet with flanged fittings.
  
  
• 7.5 HP 1725 rpm direct drive motor.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

DEWATERING & DISCHARGE CONVEYOR over RECIRCULATION TANK:

• 30 inch wide by 56 inch long by 28 inch deep recirculation tank.
  
  
• 30 inch wide by 66 inch long interlocking plastic chain belt.
  
  
• 46 inch high discharge on adjustable threaded rod feet.
  
  
• 1HP stainless steel motor & gear box.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this greens washer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food equipment needs.

ALARD item reference #: Y5285