A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

July 2023 Archives

CVP A600 vacuum gas-flush BAG SEALER, Y5613

CVP Fresh VAC Model A600
with 32 inch wide seal bar.


A refurbished CVP A600 Fresh Vac food grade dual-snorkel jaw type bag sealing machine, with vacuum pump, for industrial food process applications. Manufacturer rated for modified atmosphere packaging of food products, including vegetables, poultry, beef, pork, lamb, sausage, fish, cheese, for extended shelf life.


  • y5613d_crop_email.jpg32 inch wide seal bars with bag stretchers.

    • Dual snorkels for vacuum and / or gas-flush - adjustable for spacing and depth.

    • Pneumatic powered sealing bars:

    • Two-hand safety "finger trigger" activation.

  • 26 inch wide by 8 inch deep bag support shelf with back plate - adjustable for bag height.

  • Pneumatically actuated sealing jaws with 2HP vacuum pump.

  • Equipped with a stainless steel gas reserve tank to support gas-flush.

  • y5613l_crop_email.jpgIntegrated operator panel with controls for gas, vacuum, seal temperature & cooling time.

  • All food grade sanitary stainless steel construction.

  • 110 volt single phase 20 amp electrical input.

As of this writing, this CVP Freshvac modified atmosphere bag sealer is in stock at ALARD, refurbished to EXCELLENT operational, pneumatic, electrical, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food packaging needs.

ALARD item reference #: Y5613

Chester Jensen Instant Chiller, 3-plate, Y2141

Food grade sanitary
for potable water, juice,
and other liquid food products...

Chester Jensen Instant Chiller, 3-plate, Y2141
from Alard Equipment Corporation.

A Chester Jensen INSTANT CHILLER, with three 60 by 44 inch chill plate for rapid cooling of juice, drinking water, food process water / process loop water or solutions, and other food grade sanitary potable liquids.


  • (3) stainless steel chill plates each 60 inches long by 44 inches top-to-bottom. Product cascades down the plates in a laminar flow for rapid liquid chilling.

    • The expanded gas evaporator plates are formed contain (32) 1 inch tubes, for freon or glycol cooling.

    • Each plate has top and bottom 1 5/8" ID coolant media inlet and outlet tubes.

    • Originally shipped with (2) evaporator plates, one has been added for a total of three installed, with cabinet space to add a fourth plate if so desired (not included).

  • Fully enclosed falling film cascade chamber to eliminate product contamination with removable panels on three sides to allow excellent access for cleaning and sanitation.

  • 3 inch threaded product inlet at a 90 inch infeed height.

  • Insulated bottom collection tank with 3 inch Tri-clamp product outlet at at a 12 inch discharge height.

  • Overall dimensions of 78 inches long by 33 inches wide by 92 inches high.

As of this writing, this Chester Jensen falling film plate chiller system is in stock a at ALARD, in very good operational, mechanical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process cooler and chilling equipment needs.

ALARD item reference #: Y2141

Two-station BAG FILLING TABLE, Y5432

food grade stainless steel, for fill by weight,
with scales & bag holders.


An Alard model BT2020 2-spout food grade stainless steel bag filler table with weigh scales and bag holders for bag-filling of precut produce by weight, such as freshcut vegetables, leafy salad mixes, florets and fresh peeled whole products...


  • This stainless steel two-person BAGGING TABLE measures 43 inches long by 75 inches wide with sides that taper from 13.75 inches high at the back down to 5.75 inches in the front.

  • This bag filling manual pack table features an ANGLED BACK in order to feed product closer to the operator's reach. The flat-bottom portion of the table is only 29.5 inches in depth (from front to back), while the angled back-stop allows for additional full-load capacity.

  • Two (2) 30lb electric washdown scales with over-under remote readout display head mounted at eye level; one for each hand-packing station.

  • y5432i_crop_email.jpgEach bag-filling station has a standard 6.5 inch diameter filling tube, which can be fitted with an optional stainless steel filling funnel for larger or smaller bag sizes.

  • Each filling tube is equipped with a stainless steel pneumatic bag holder to keep the bag held in position during the bag-filling process.

  • Beneath each bag holder is a 10 inch deep (front to back) by 12 inch wide (side to side) stainless steel weigh cell platform which is height adjsutable to accomodate different bag lengths.

  • All food grade sanitary stainless steel construction.

  • 110 volt single phase (household current) electrical input.

  • Compressed air required for the pneumatic bag holders.

  • NEW.


  • Each operator hangs a bag on their filling funnel and engages the bag holder by pressing a button.

  • The operator then pulls product from the table into the filling tube until the proper weight is made.

  • Overages can easily be removed.

  • The operator then disengages the bag holder and removes the bag, puts a new bag in place & the bag packing process is repeated.

As of this writing, this two-station bag filler table is in stock at Alard, fully assembled, ready to go, and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y5432

Coleslaw and sauerkraut SHREDDER, Y5337

industrial-capacity food grade stainless steel


A Commercial Slicer Model 26NS, also known as a "Waterfall" slicer or Kibbey cutter, has long been the mainstay of the coleslaw and sauerkraut industries. Manufacturer recommended for lettuce, cabbage, onions, peppers, cucumbers, potatoes,carrots, tomatoes and celery...


  • 26 inch diameter aluminum frame cutting disk with stainless steel knives; 100% cutting surface.

  • y5337g_crop_email.jpg"Three cup" counter-rotating aluminum carrying arm pusher-plow to prevent rolling and maximize throughput capacity.

  • Open infeed to easily accept heads of cabbage, lettuce and other whole vegetable products (up to 9 inch diameter).

  • Manufacturer rated for up to 25,000 pounds per hour, depending on cut size and product.

  • A range of cutting disk and blade configurations are available for one and two-dimensional cutting (slices, strip cuts, julienne cuts) in thicknesses from 1/32 to 2 inch and up to 5 inch in length. Grater blades are also available for shredding carrots, slaw, onions, and other fresh vegetables. CALL 315-589-4511 to discuss your particular industrial food process vegetable cutting / cut size specification.

  • y5337e_crop_email.jpgFood grade stainless steel construction, including tubular stainless steel frame.

  • Complete with two (2) 1.5HP stainless steel shrouded gear-motor drives - one for main cutting wheel and the other powers the plow.

  • Stainless steel control panel with safety interlock system, emergency stop and safety lock-out.

  • 230 volt 3 phase electrical input.

As of this writing, this industrial capacity slicing and strip cutting machine is in stock NEW, needing only completion with cutting knives to buyer specification prior to shipment.

CALL 315-589-4511 to confirm availability and discuss your food process fruit and vegetable slicing, shredding, and strip cutting needs.

ALARD item reference #: Y5337

TUMBLE MIXER, food grade, stainless steel, Y5618

14 cubic foot stainless steel drum type batch mixer,
tilt discharge.


A food grade stainless steel tumble mixer, in a "cement mixer" configuration for batch mixing and blending applications, for gentle dividing, folding, and tumbling action, with inline infeed and discharge with power tilt to dump. Well suited for mixing and blending wet or dry particulate products, spices, cut fruit, diced vegetables, salsa, sauces, wet salads (fruit salad, macaroni salad, potato salad) and/or other ingredients and products for industrial food processing production.


  • Food tumbler mixer barrel has a 26 inch diameter infeed / discharge opening.

  • y5618g_crop_email.jpg40 inch diameter by 40 inch deep <>14 cubic foot batch mixer drum with (3) 35 inch long by 6 inch wide lifting paddles.

  • Inline straight-through product flow, feeds on one side, flips over approximately 180 degrees to discharge on the opposite side.

  • Power tilt discharge.

  • y5618c_crop_email.jpgTubular stainless steel tumbler support stand set for a 67 inch high infeed, 38 inch discharge height.

  • Operator control panel.

  • 1HP drum drive, 1.5HP tilt drive.

  • All food grade stainless steel construction.

  • 208/230 volt 3 phase electrical input.

As of this writing, this batch tumble mixer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5618

Hycor Rotstrainer 2572, .15 inch sieve, Y5420

ROTARY DRUM SCREEN for liquid / solids separation,
food grade stainless steel...


An externally fed self-cleaning rotating drum screener, for separating liquids and solids, such as wastewater recovery, dewatering and/or solids separation.


  • y5420g_crop_email.jpgUnfiltered liquids are fed via a 5 inch diameter flanged inlet into a head tank which directs the liquid / solid slurry onto the outside of the 25 inch diameter by 72 inch long wedgewire strainer reel which has .15 inch sieve openings.

  • The strainer drum cylinder rotates so that any solids which stick to the outside of the drum are scraped off by a stainless steel doctor blade and drop off the edge.

  • Meantime, the liquid is filtered through the sieve screen and discharges through a 12.5 inch diameter rear discharge.

  • Additional screen clearing action is provided, for cleanup or as needed, by a stainless steel spray header running through the center of the wedge-wire cylinder.


  • Food grade sanitary stainless steel construction.

  • y5420e_crop_email.jpg208 / 230 volt 3 phase electrical input motor, turns the rotary screen reel at 70 rpm.

As of this writing, this rotary drum wastewater screen is in stock at ALARD, in VERY good operating condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your waste water recovery needs.

ALARD item reference #: Y5420

Moline SugarKing modular DONUT SUGARING SYSTEM system with feeder, Y4860

Moline SugarKing COATING DRUM,
donut sugaring system...


This Moline Sugar-King DOUGHNUT SUGARING SYSTEM includes a tumbling module with integrated / onboard sugar feed module. Manufacturer literature rates this for continuous gentle sugar coating action for tons-per-hour production of doughnuts, and other similar food applications, with powdered, granulated, or cinnamon sugar, while producing uniform coverage in a high volume production environment.


  • Sugar in the hopper is loosened automatically by an agitator and fed through the elevating feed conveyor up to the sugar infeed chute where it enters the stationary drum.

  • The sugar coats the product through a perforated, rotating inner drum as the donuts move through the sugar zone in a gentle turning, tumbling motion to the discharge conveyor.

  • Loose sugar is continuously agitated and carried through the machine while the unused sugar is automatically recaptured and returned to the hopper via the sugar discharge chute, reducing waste.


  • Capable of running 10,000 to 30,000 doughnuts an hour per manufacturer literature.

  • Able to handle coarse to fine granulations of sugar.

  • y4860h_crop_email.jpg23 inch diameter by 72 inch long reel with 1/2 inch by 7/8 inch oval perforations.

  • Top inspection door.

  • 24.75 inch wide by 23 inch long discharge chute with 8 inch long rod area.

    • Rods have 3/16 inch openings.

    • Slide-out catch pan under the rod area.

  • 18.5 inch inch discharge height.

  • Bottom/ bulk sugar hopper measures 21 inch by 49 inch long with paddle agitator - hopper tapers to a bottom feed auger which feeds a cleated elevating belt conveyor.

  • Cleanout door under the feed auger.

  • y4860b_crop_email.jpg5.5 inch wide rubber elevating belt with 1 inch high cleats on 6 inch centers.

  • Variable speed drive powers agitator, bottom feed auger and elevator.

  • Stainless steel control panel.

  • All food grade sanitary stainless steel food contacts..

  • 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this donut sugaring system is in stock at ALARD, in good condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food coating needs.

ALARD item reference #: Y4860