A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

September 2023 Archives

INSPECTION CONVEYOR, 12x24, stainless steel, Y5610

FRUIT AND VEGETABLE INSPECTION/TRIM CONVEYOR,
12x24 six person, 6-work-station
food grade, stainless steel...

y5610c_crop_email.jpg

A single level conveyorized food process inspection table with a 12 foot long by 24 inch wide conveyor belt running between 9 foot long UHMW plastic work surfaces. Ideal as a trim line for fruit and vegetable inspection, trimming, coring, sorting, and rework, sized for six to eight workstations...


FEATURES:

  • y5610a_crop_email.jpg12 foot long by 24 inch wide solid interlocking plastic chain type conveyor belt running between 1 3/8" high stainless steel sides.

  • High density plastic work shelves, 9 inches wide by 9 feet long, sized for 6 to 8 workstations / workers.

  • Work surfaces and inspection belt at a 37 inch working height on adjustable height feet (adjustable for approximately 32 inches to 40 inches).

  • y5610g_crop_email.jpgGasketed fiberglass control box with on / off buttons and variable speed control adjustable for up to 45 feet per minute.

  • All food grade stainless steel construction.


As of this writing, this NEWly fabricated inspection table conveyor is IN stock at Alard, complete, NEW, and available for immediate shipment.

CALL 315-589-4511 to discuss your food product inspection, sorting, trimming and coring needs.

Alard item reference #:Y5610

INSPECTION CONVEYOR, 9x24, food grade, stainless steel, Y5607

FRUIT AND VEGETABLE INSPECTION CONVEYOR,
9x24 four person / 4-work-station,
food grade, stainless steel, new...

y5607a_crop_email.jpg

A single level conveyorized food process inspection table with a 9 foot long by 24 inch wide conveyor belt running between 6 foot long HPDE plastic work surfaces. Ideal as a trim line for fruit and vegetable inspection, trimming, coring, sorting, and rework, sized for four work stations...


FEATURES:

  • y5607d_crop_email.jpg9 foot long by 24 wide solid interlocking plastic chain type conveyor belt running between 1 3/8 inch high stainless steel sides.

  • High density plastic work shelves, 9 inches wide by 6 feet long, sized for four to six work-stations / workers.

  • Work surfaces and inspection belt at a 37 inch working height on adjustable height feet (adjustable for approximately 32 inches to 40 inches).

  • y5607h_crop_email.jpgGasketed PVC control box with on / off buttons and variable speed control adjustable for up to 45 feet per minute.

  • All food grade stainless steel construction.

CALL 315-589-4511 to confirm current availability, and discuss your food product inspection, sorting, trimming and coring needs.

As of this writing, this inspection table with belt conveyor is IN stock at Alard, complete, NEW, and available for immediate shipment.

Alard item reference #:Y5607

LEAFY VEGETABLE JET WASHER, Y5549

LAMINAR FLOW fruit and vegetable WASHER,
turbulent washer, flume washer, jet washer, immersion washer,
food grade stainless steel.

y5549c_crop_email.jpg


A turbulent-flow IMMERSION WASHER FLUME with water-jet agitation for gentle but forceful washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.


FEATURES:

  • y5549i_crop_email.jpgThe laminar-flow HELICAL WASH FLUME is 82 inches long by 20.5 inches wide by 19 inch deep U-trough with adjustable water injection ports.

    • Three (3) forward facing "push" injectors.

    • Four (4) "vortex" angled nozzles located along the left hand side.

    • Three (3) ports along bottom of tank.

  • The wash tank overflows onto a 49 inch long by 18 inch wide VIBRATING DEWATERING SHAKER CONVEYOR with perforated screen which allows excess water to pass through while discharging the dewatered product onward.

  • Conveyor powered by two (2) 1/3 HP rotary/eccentric vibrator motors.

  • Removed water is collected in a stainless steel catch and balance tank equipped with:

    • y5549e_crop_email.jpgTwo (2) Recirculation Pumps each powered 3HP drive motor.

    • Check Valve keeps the wash tank water from draining into the wash tank when the pump is shut off.

  • Stainless control box with variable speed control.

  • All food-grade sanitary stainless steel construction.

  • 208/230 volt 3 phase electrical input.


As of this writing, this spiral-flow washer is in stock at ALARD, in EXCELLENT mechanical, electrical & cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and processing equipment needs.

Alard item reference #: Y5549

ABC HANSEN Universal MILL, 10HP, Y5458

ABC HANSEN INDUSTRIAL MILL,
food grade hammermill, grinder, 10HP...



y5458s_crop_email.jpg


An ABC Hansen Universal Plate / Stone / Hammer Mill for controlled particle size reduction in food processing applications including grain, cereals, legumes, herbs, spices, coffee and more.


FEATURES:

  • y5458n_crop_email.jpgSet with HAMMERMILL head and 1/2 inch diameter perforated screen - other screens are available. CONTACT ALARD at 315-589-4511 to discuss your specific cutting / grinding milling application..

  • 20 inch long by 20 inch wide by 15 inch deep tapered infeed hopper.

  • 66 inch high infeed, 32 inch discharge height.

  • y5458g_crop_email.jpg10 HP belt drive motor.

  • 208 / 230 volt 3 phase electrical input.

  • Includes steel burr grinding disk option.

As of this writing, this ABC Hansen universal mill is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food product particle size reduction needs.

ALARD item reference #: Y5458

FOOD METAL DETECTOR with conveyor, 25x15 opening, Y5599

FOOD PROCESS METAL DETECTOR
with BELT CONVEYOR, 25x15 opening,
food grade sanitary stainless steel.

y5599i_crop_email.jpg


A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed food grade sanitary stainless steel conveyorized metal detection system for detecting and rejecting tramp metal in an industrial production line setting. Food grade sanitary stainless steel construction, particularly for industrial food processing applications, but also for cosmetics, pharmaceuticals, and other products where product inspection for metal contamination is needed.



FEATURES:

  • y5599f_crop_email.jpg15 11/16 inch high by 25.5 inch wide (39cm high by 647mm wide) net USABLE aperture opening with the conveyor belt in place...

  • The stainless steel frame wash-down belt transfer conveyor has a 104 inch (264 centimeters) long by 23.25 inch (59 centimeters) wide interlocking plastic chain type belt, running at a 30 inch (76 centimeters) working height, with adjustable feet allowing +/- 4 inch (10 centimeter) height adjustment.

  • y5599a_crop_email.jpgThe thru-conveyor is complete with a belt-stop alarm reject system configuration, and a variable speed control for the belt drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed. We can configure other reject systems to suit your particular product needs; CALL 315-589-4511 to discuss your specific product application.

  • A food grade metal detector specifically built for food processing and other industrial production line and packaging line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

  • The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing precise tuning for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc.) allowing for maximum versatility with the widest range of products. The optimal frequencies automatically set by the system in "product learn" mode to maximize sensitivity / minimize false rejects with your specific product.

  • Sensitivity varies depending on product run, and frequency setting (determined at are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product effect at a sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • 304 stainless steel search head and conveyor construction.

  • 110 volt single phase (standard household current) electrical input.
  • NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.


As of this writing, this food process METAL DETECTOR is in stock NEW at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection equipment needs.

Alard item refrence #: Y5599

Groen 20 gallon steam jacketed stainless steel KETTLE, Y0488

20 gallon STEAM JACKETED KETTLE,
TILT-to-DUMP,
food grade, stainless steel.

y0488b_crop.jpg

A 20 gallon capacity steam jacketed cooking kettle with manual crank tilt to dump discharge.


FEATURES:

  • y0488f_crop_email.jpg20 inch diameter by 19 inch deep hemispherical bottom vessel with pour lip.

  • Manufacturer tagged, U-stamped & National Board coded for 45 psi working pressure.

  • Pedestal base.

  • 36 inch infeed height, 12 inch high discharge.

  • y0488d_crop_email.jpgAll food grade sanitary stainless steel construction.


As of this writing, this Groen 20 gallon steam kettle is in stock at ALARD, in GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cooking kettle needs.


ALARD item reference #: Y0488

Stein XL-24 BREADING APPLICATOR, breader, Y4704

STEIN Model XL-24
BREADING APPLICATOR, 24 inch wide,
all stainless steel.

y4704h_crop_email.jpg

A Stein breading applicator manufacturer designed for easy operation, maintenance & cleaning. Breading applicators can be positioned in a multitude of line configurations to handle poultry, fish, seafood, cheese, onions, mushrooms plus other coated substrates...


FEATURES:

  • Suitable for handling fine to coarse free flowing predust and/or crumb coatings.

  • 24 inch wide woven wire belt.

  • 6.5 inch diameter by 64 inch long breading lift auger with removable side cover.

  • y4704q_crop_email.jpg3 inch diameter metering & distribution auger with adjustable overhead waterfall gate.

  • 5 inch casters for added mobility.

  • All food grade sanitary stainless steel construction.

  • Hydraulic drive with independent controls -- hydraulic power pack/pump not included.

  • Stainless steel control box with E-stop and safety interlock system.

  • 460 volt 3 phase electrical input.


As of this writing, this Stein Breader is in stock at ALARD, in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular breading application needs.

ALARD item reference #: Y4704

Stein BREADER XL-24 breading applicator, Y4703

STEIN Model XL-24 BREADING APPLICATOR,
24 inch wide, food grade, stainless steel.


y4703b_crop_email.jpg

A Stein BREADER manufacturer designed for easy operation, maintenance & cleaning. Breading applicators can be positioned in a multitude of line configurations to handle poultry, fish, seafood, cheese, onions, mushrooms plus other coated substrates...


FEATURES:

  • y4703_crop_email.jpgSuitable for handling fine to coarse free flowing predust and/or crumb coatings.

  • 24 inch wide woven wire belt.

  • 6.5 inch diameter by 64 inch long breading lift auger with removable side cover.

  • y4703d_crop_email.jpg3 inch diameter metering & distribution auger with adjustable overhead waterfall gate.

  • 5 inch casters for added mobility.

  • All food grade sanitary stainless steel construction.

  • Hydraulic drive with independent controls -- hydraulic power pack/pump not included.

  • Stainless steel control box with E-stop and safety interlock system.

  • 460 volt 3 phase electrical input.

As of this writing, this Stein Breader is in stock at ALARD, in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular breading application needs.


ALARD item reference #: Y4703

Food grade METAL DETECTOR with conveyor, 20x8 opening, Y5601

FOOD PROCESS METAL DETECTOR with BELT CONVEYOR,
20x8 opening, food grade stainless steel...

y5601h_crop_email.jpg


A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed food grade sanitary stainless steel conveyorized metal detection system, for detecting and rejecting tramp metal in an industrial production line setting. Food grade sanitary stainless steel construction, particularly for industrial food processing applications, but also for cosmetics, pharmaceuticals, and other products where product inspection for metal contamination is needed.


FEATURES:

  • 7 11/16 (19.5cm) high by 20 5/8 inch (52cm) wide net USEABLE aperture opening with the conveyor belt in place...

  • y5601a_crop_email.jpgThe 304 stainless steel frame washdown belt transfer conveyor has a 87 inch (221cm) long by 17 5/8 inch (44.5cm) wide interlocking plastic chain type belt, running at a 31.5 inch (80cm) working height, with adjustable feet allowing +/-4 inch (10cm) height adjustment.

  • The thru-conveyor is complete with a belt-stop alarm reject configuration, and a variable speed control for the belt drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed.

  • y5601g_crop_email.jpgA food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

  • The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • 110 volt single phase (standard household current) electrical input.

  • FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.

  • Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • 304 stainless steel search head and conveyor construction.

  • NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.


As of this writing, this food process metal detector is in stock new at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection system needs.

Alard item reference #:Y5601

Food grade METAL DETECTOR with conveyor, 25x15 opening, Y5600

FOOD PROCESS METAL DETECTOR
with BELT CONVEYOR, 25x15,
USDA food grade sanitary stainless steel..


y5600a_crop_email.jpg

A Cassel Metalshark2 MULTI-FREQUENCY washdown sealed food grade sanitary stainless steel conveyorized metal detection system for detecting and rejecting tramp metal in an industrial production line setting. Food grade sanitary stainless steel construction, particularly for industrial food processing applications, but also for cosmetics, pharmaceuticals, and other products where product inspection for metal contamination is needed.


FEATURES:

  • 15 11/16 inch high by 25.5 inch wide (39cm high by 647mm wide) net USABLE aperture opening with the conveyor belt in place...

  • The stainless steel frame wash-down belt transfer conveyor has a 104 inch (264 centimeters) long by 23.25 inch (59 centimeters) wide interlocking plastic chain type belt, running at a 30 inch (76 centimeters) working height, with adjustable feet allowing +/- 4 inch (10 centimeter) height adjustment.

  • The thru-conveyor is complete with a belt-stop alarm reject system configuration, and a variable speed control for the belt drive, adjustable from 16 to 75 feet per minute (approximately 5 to 23 meters per minute) belt speed. We can configure other reject systems to suit your particular product needs; CALL 315-589-4511 to discuss your specific product application.

  • y5600c_crop_email.jpgA food grade metal detector specifically built for food processing and other industrial production line and packaging line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

  • The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing precise tuning for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc.) allowing for maximum versatility with the widest range of products. The optimal frequencies automatically set by the system in "product learn" mode to maximize sensitivity / minimize false rejects with your specific product.

  • Sensitivity varies depending on product run, and frequency setting (determined at are electrically conductive introduce "product effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product effect at a sensitivity of 1.7mm ferrous, 2.3mm non ferrous, and 2.7mm stainless steel at 300 kHz.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • 304 stainless steel search head and conveyor construction.

  • 110 volt single phase (standard household current) electrical input.

  • NEW EQUIPMENT - Includes a 2 year manufacturer warranty on hardware / parts.


As of this writing, this food process METAL DETECTOR is in stock NEW at Alard, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection equipment needs.

Alard item refrence #: Y5600

Refurbished Urschel model G DICER, Alard item Y5318

URSCHEL MODEL G DICER,
STRIP CUTTER, SLICER...



y5318c_crop_email.jpgReconditioned Urschel G DICER, strip-cutter, slicer, french-fry cutter,
Alard item Y5318

This refurbished URSCHEL Model G DICER, strip cutter, slicer, French fry cutter. A three dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output.


Three cutting dimensions...

  • y5318e_crop_email.jpgSlice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.

  • Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine.

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches (76mm) --change part.

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement!


This cutting machine FEATURES...

  • Stainless steel slice shell and impeller with 10 inch opening.

  • Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.

  • y5318i_crop_email.jpgGasketed PVC control box with safety interlock system.

  • Standard 2 HP drive motor.

  • 208 / 230 volt 3 phase electrical input.


As of this writing, this reconditioned Urschel dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting specification.

ALARD item reference #: Y5318

6 inch FOOD PUMP, Cornell NHPP, in stock new, Y5633

CORNELL Model 6NHPP-F16K
6-inch hydro-transport
FOOD PUMP
available in-stock new...

y5633d_crop_email.jpg


A Cornell 6 inch food pump with flanged inlet and outlet connections. The Cornell Hydro-Transport Food Pump is an excellent foundation for a pipe flume, open flume, wash flume, chill flume, disinfectant bath, or other water conveyor configuration for gently conveying high volumes of whole or cut food products in water at tons-per-hour volume capacities.


FEATURES:

  • Cornell 6NHPP-F16K cast-iron hydro flow food pump with stainless steel impeller, six-inch inlet and outlet. Stainless steel body pump also available; --call 315-589-4511 do discuss your specific requirements.

  • y5633a_crop_email.jpgManufacturer rated for solids handling ability for product up to 4 inch diameter by 6 inches in length. Larger diameter pumps are available for larger product sizes; --call 315-589-4511 to discuss your specific application requirements.

  • Expanded volute PP series pump for the ultimate in gentle handling of delicate food products. So gentle the manufacturer rates for pumping live fish!

  • Specifically designed and built for industrial food processing application use, with tons-per-hour throughput capacity.

  • Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM, and total dynamic head resistance. Pump curves are available by request; --call 315-589-4511 do discuss your specific application requirements.

  • NEW, with two-year manufacturer warranty.

The Cornell hydro transport food pump is frequently employed to power open stainless steel flume systems, while others, pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and extend exposure to the water, which usually includes either a sanitizing agent, or a preservative solution such as vitamin C; --depending on the product. The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated ingredients to any point in the plant where they want to dry, and or mix and or pack the final product.


Others use the chill flume for pre-cooling blanched (very lightly cooked to kill the active enzymes) food products in water prior to running them through an IQF freeze tunnel. Others use the flume system just to convey product in water. In every case, the powerful Cornell pump can gently move high tons-per-hour output to wherever it needs to go in the plant.

Alard also stocks and custom-configures various kinds of dewatering, solids-separation, water recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all tailored to the end-user's specific food product(s) and application. With Cornell's large range of hydro-transport pump size and material configurations, and with Alard's ability to configure and "gear" the pump to the buyer's specific needs, Alard's Cornell Hydro-Transport food pumps are a superb tool for a wide variety of industrial food processing applications.

As of this writing this Cornell 6NHPP model food pump is IN stock NEW and available for immediate shipment.

CALL 315-589-4511 to confirm current availability, and to discuss your particular food process bulk product conveying, chilling, cooling, sanitizing and pumping equipment needs.

Alard item reference #: Y5633

USDA food grade sanitary stainless steel BIN DUMPER, Y5430

BIN DUMPER / TOTE DUMPER
for up to 48 inch wide bins,
food grade, stainless steel, hydraulic powered;
--IN STOCK NEW.


y5430e_crop_email.jpg


Alard model BD48A food grade USDA sanitary stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, pallet boxes, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.


FEATURES:

  • Sized for 48 inch wide or smaller totes, with bin-holder measuring 54 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • Food grade stainless steel dumper construction, with USDA sanitary welds on all product contact surfaces (i.e. in the bin holder); with continuously welded smooth seams all around the interior.

  • y5430c_crop_email.jpgDump action provided by 3.5 inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

  • Heavy duty tubular stainless frame construction.

  • Dump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications. Call 315-589-4511 to discuss your specific bulk food product container dumping need.


As of this writing this food grade stainless steel floor-level infeed BIN DUMPER is IN stock NEW and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process bulk material handling needs.

Alard item reference #: Y5430

BIN DUMPER, food grade, stainless steel, Y5264

BIN DUMPER / TOTE DUMPER
for 40 by 48 inch bins,
food grade, stainless steel, hydraulic powered;
--IN STOCK NEW.



y5264c_crop_email.jpg

Alard model BD40 food grade stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.


FEATURES:

  • Sized for standard 40 inch by 48 inch bin, or smaller, with bin holder measuring 45.75 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • Food grade stainless steel dumper construction, including heavy duty tubular stainless frame.

  • y5264b_crop_email.jpgDump action provided by 3.5 inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (over all height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.


As of this writing this food grade stainless steel floor-level infeed BIN DUMPER is IN stock NEW and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process bulk material handling needs.

Alard item reference #: Y5264

Grote slicer MODEL 613, with shuttle conveyor, Y5087

GROTE 613VS MULTI-SLICER, USDA,
stainless steel, vegetable slicer, meat & cheese cutter,
with shuttle conveyor...

y5087zj_crop_email.jpg

A Grote model 613-VS Multislicer is a bulk slicing, stacking and shingle cutting machine. This versatile band-type slicer is manufacturer recommended for boneless non-frozen meats, cold cuts, cheeses, vegetables, fruits, bread products and more.



FEATURING:

  • Manufacturer rated from 37 to 90 strokes per minute per lane.

  • y5087x_crop_email.jpgPatented "Accuband" continuous band cutting system for precision slicing.

  • Variable slice thickness from .02 inch (0.5 mm) to 1/2 inch (12.5 mm) in stack or shingle mode and up to 1 inch thick in bulk mode.

  • Manufacturer rated for stack height up to 2 inches (51mm).

  • Continuous gravity feed product loading during operation.

  • 30 inch long by 13 inch wide stainless steel mesh carryout conveyor.

  • y5087_grote_613_slicer_shuttle_conveyor_b.jpgNEW shuttle conveyor for product stacking or shingling.

  • All food grade USDA sanitary stainless steel construction - easily disassembled and reassembled for easy cleaning & sanitation.

  • NEW integral operator control panel with variable speed controls, slice counter for grouping slices and variable group spacing, safety interlock system.

  • 220 volt single phase electrical input.


As of this writing, this automatic food slicing machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5087

Single station BAG PACKING TABLE Y5593

SINGLE-STATION NETWEIGH BAG FILLING TABLE,
with wash-down scale,
and adjustable height pneumatic bag-holder,
all food grade stainless steel...

y5593_crop_email.jpg

A food grade sanitary stainless steel BAG PACKING TABLE / hand-pack bag filler for fresh-cut produce packaging, with a remote readout scale, and adjustable height pneumatic bag-holder, for filling pre-cut produce and other food products into bags by weight. Ideal for whole, diced, or chopped vegetables and fruits,shredded or whole leafy vegetable products, and salad mixes.


OPERATION:

  • The operator hangs the bag on the bag-filling funnel and engages the bag holder by pressing a button.

  • The operator then pulls product by hand, from the table into the filling tube, until the proper weight is made, as indicated by the eye-level over/under scale. A little product easily be remove if needed to "make weight".

  • The operator then disengages the bag holder and removes the bag, puts a new bag in place, and the process is repeated.


FEATURES:

  • The stainless steel bag-filler / pack table is 43 inches long by 37.5 inches wide inner/working dimensions, and has sides that taper from 14 inches high at the back, and angles down to 6 inches high at the front.

  • y5593g_crop_email.jpg30 pound capacity Cardinal wash-down over-under scale, with remote readout mounted at eye level. Other model scales / capacity are/is available to customer specification; CALL 315-589-4511 to discuss your particular fruit and/or vegetable bag weigh-filler specifications.

  • 6.25 inch diameter front center filling tube. (Can be supplied with filling tube inserts for smaller size bags).

  • y5593f_crop_email.jpgStainless steel pneumatic bag holder with push-button operator control for holding bag on the filling tube.

  • Beneath the bag holder is a 12 inch wide by 10 inch front-to-back stainless steel weigh cell platform which is adjustable to accommodate different bag heights.

  • 40 inch working height at front lip, on threaded rod adjustable feet with foot-pads.

  • All food grade sanitary stainless steel construction.

  • 110 volt single phase electrical input (standard household current) for the scales, and requires compressed air for the bag holders.


NEW!

As of this writing, we have this pre-cut produce by-weight bag filler table in stock new at Alard, fully assembled, ready to go and available for immediate shipment. CALL 315-589-4511 to confirm present availability, and to discuss your particular pre-cut produce / fresh produce packaging equipment needs.

Alard item reference #:Y5593

Vibratory DEWATERING SHAKER, GRADER, Y4864

VIBRATING DEWATERING SHAKER, 87x24,
food grade, stainless steel...

y4864m_crop_email.jpg
A Commercial vibrating shaker with quick-release interchangeable screen for grading, size sorting, fines removal, grading out shorts, solids separation, dewatering and even-feeding whole or cut food products to downstream components in an industrial food processing line...


FEATURES:

  • y4864o_crop_email.jpg24 inch wide by 7.25 foot long shaker bed:

    • 18 inch long solid infeed section.

    • Removable / replaceable WEDGEWIRE screen sections:

      • 48 inch long.

      • 1/8 inch rods and 1/8 inch sieve -- rods are inline with flow.

      • Quick-release screen retainer clamps for fast screen replacement / changeover.

    • 21 inch long solid surface discharge section.

    • 5 inch high stainless steel sides.

  • 44 inch high infeed, 36 inch discharge height.

  • Stainless steel water collection pan with 4 inch diameter front bottom outlet.

  • y4864i_crop_email.jpgAll food grade sanitary stainless stee construction including tubular frame and legs.

  • Ajax eccentric driven by 1HP motor.

  • 460 volt 3 phase electrical input.


As of this writing, this vibrating conveyor is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process conveying equipment needs.

ALARD item reference #: Y4864

Urschel Comitrol Processor Model 3000, Alard item Y5483

URSCHEL COMITROL PROCESSOR,
Model 3000, 30HP
...


DEMO VIDEO
Urschel Comitrol 3000 MILL making sweet pepper puree,
Alard item Y5483
from Alard Equipment Corporation.


Manufacturer recommended for industrial tons-per-hour food processing applications, for milling, pureeing, fine grinding, high-shear emulsifying, homogenizing, and finishing; of viscous and liquid food products, such as fruit nectars, fruit butters, condiments, sauces, dressings, pulps, gelatins, soy milk, baby formula, tomato ketchup, barbecue sauces, vegetable purees, beverage concentrates, and creams and ointments.


Manufacturer recommended for uniform milling of high moisture substrates such as cooked meats, whole kernel corn, ricotta cheese, beans and other vegetables.



FEATURES:

  • 9 inch diameter by 14.5 inch deep straight side infeed hopper with 4 inch Triclamp.

  • 3 inch cutting head with dogleg impeller - a range of parts are available for this machine, CALL 315-589-4511 to tell us YOUR cutting specification!

  • 5 inch by 3 inch discharge outlet at 33 inch high.

  • Equipped with oil mist system.

  • 58 inch high infeed, 38 inch discharge height.

  • Two-piece enclosure for ease of sanitation and maintenance.

  • All food grade stainless steel construction.

  • Factory control panel with safety interlock system.

  • 30 horsepower brake motor drive.

  • 460 volt 3 phase electrical input.


As of this writing, this Urschel Comitrol 3000 is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process particle size reduction needs.

ALARD item reference #: Y5483

About this Archive

This page is an archive of entries from September 2023 listed from newest to oldest.

August 2023 is the previous archive.

October 2023 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)