RIETZ EXTRUCTOR Model RE-24,
frozen block grinder, 75 HP.
 

A Rietz Bepex RE-24-K9E943 EXTRUCTOR industrial pulverizer machine, engineered with slow speed and high torque for fracturing, crushing, grinding and tearing large frozen blocks or barrels of bulk materials, such as animal products, meats, cheese, fruits and/or vegetables.

FEATURING:

• 24 inch diameter rotor.
  
  
• 10-spoke discharge plate / die plate / extrusion plate.
  
  
• Food grade sanitary stainless steel product contact surfaces with heavy stainless steel support frame.
  
  
• 75 horsepower chain drive motor.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Rietz Bepex EXTRUCTOR is en route to ALARD, and will soon be test run and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting, grinding, pulverizing & particle reduction size needs.

ALARD item reference #: Y5863

HALLDE Model RG-400
VEGETABLE PREPARATION MACHINE,
slicer, shredder, dicer, cutter... 

DEMO VIDEO
Hallde model RG-400 CUTTER, slicer, shredder, dicer,
vegetable preparation machine Y5812
from Alard Equipment Corporation.

A general purpose semi-automatic cutting machine for slicing, shredding, dicing and grating food products. Manufacturer rated for 20 to 80 lbs. per minute depending on substrate & speed of operator. Slice, dice, julienne, grate, shred & crinkle cut (with proper cutting parts) from powder size particles up to 1 inch slices/dices. 

FEATURES:

• 8 inch diameter cutting chamber with three (3) fixed blades.
  
  
• Air powered push feeder - compressed air input.
  
  
• 46 inch high in-feed, 26 inch discharge height.
  
  
• Food grade stainless steel & aluminum construction.
  
  
• 2HP two (2) speed motor.
  
  
• 208/230 volt 3 phase electrical input.
  
  
• One (1) cutting disc from existing ALARD stock included.

As of this writing, this refurbished food processor is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process cutting needs.

ALARD item reference #: Y5812

URSCHEL Model GK DICER, strip cutter, french-fry cutting machine...

A three-dimensional fruit and vegetable cutter, specified for cutting all the same flat dice and flat strip cuts as the Urschel Model G and / or G-A, but also capable of crinkle dices, and crinkle strip cuts e.g. for crinkle cut French fries; accepting product input sized up to 5.5 inches (140mm) in any dimension.

Manufacturer recommends for uniform dices, strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, cantaloupe, endive, tomatoes, cucumbers, horseradish, apples, grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and many other foods; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions:

• Slice thickness is hand-wheel adjustable from 1/8 inch (3.2mm) to 3/4 inch (19.1mm).
  
  
• Crosscut knife spindle (change part) - available in spacings from 9/32 inch (7.1mm) to 7/8 inch (22.2mm).
  
  
• Circular knives can be spaced from 3/32 inch (2.4mm) to 3 inches (76.2mm).
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G-K dicer can also make juliennes and strip cuts (two-dimensional cuts) such as for flat or crinkle-cut French fries.
  
  

FEATURING:

• Can cut flat or crinkle-cuts, with appropriate cutting parts: Call 315-589-4511 to discuss your particular cutting specification(s).
  
  
• Food grade sanitary stainless steel product contacts.
  
  
• Stainless steel shrouding, frame, knives & cutting spindles.
  
  
• Stainless steel slice shell and impeller.
  
  
• 7 inch slice shell opening.
  
  
• Aftermarket control box with safety interlock system.
  
  
• 3 HP belt drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel cutter / dicing machine is in stock at ALARD, in VERY GOOD operational condition, available immediately --needing only cutting parts for your particular food process cutting requirement.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process cutting specification.

ALARD item reference #: Y5210

FOOD PROCESS X-RAY DETECTOR
with BELT CONVEYOR, 14x7 opening, food grade, stainless steel...

The Thermo Scientific Model EZx Compact 420 is a food grade X-Ray food product inspection system, with a stainless steel belt-transfer conveyor belt, with a belt-stop alarm reject system.  Specifically designed and built for detection of foreign objects including metal, glass, stone, plastic and other dense contaminants in the context of industrial food processing, or other industrial production line applications where contamination detection is wanted.

FEATURING:

• 14 inch wide by 7 inch high USABLE opening / aperture.
  
  
• Stainless steel detection head.
  
  
• Digital operator control panel:
  
  
• Stainless steel conveyor frame:
  
  
  • 13 inch wide by 39 inch long USDA approved urethane belt.
    
    
  • Right to Left product flow.
    
    
  • 164 feet per minute (maximum).
    
    
• Lead infeed & discharge curtains.
  
  
• 36 inch working height on threaded rod adjustable casters.
  
  
• Stainless steel control panel with E-stop & PLC screen:
  
  
  • IP65 washdown.
    
    
  • Self-learning mode.
    
    
  • On-screen inspection results, monitoring & adjustment.
    
    
• Food grade sanitary stainless steel construction.
  
  
• 220 volt single phase electrical input.
  
  
• User & Service Guides included.
  
  

As of this writing, this food process X-ray machine / X-ray contamination detection system is in stock at ALARD, in GOOD condition and being sold AS-IS for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process contaminant detector needs.

ALARD item reference #: Y5443

TWO LEVEL INSPECTION CONVEYOR, INSPECTION BELT...

A Dorner Conveyors two-belt inspection table, with top and bottom conveyors; for food product inspection, grading, and / or as coring and trimming line for hand-trimming, coring, sorting, quality inspection and/or packing fruit & vegetable products into boxes or cases. Food grade stainless steel construction for fresh produce packing, or fresh cut / pre-cut produce packaging, frozen food, canning, and other industrial food processing applications. Consists of a main pick belt with an overhead sorted product takeaway conveyor.

FEATURES:

• 18 inch wide by 17 foot long lower, main conveyor:
  
  
  • Solid, modular belting.
    
    
  • UHMW type material for side guides.
    
    
  • 31 inch working height.
    
    
  • Center mount 1 HP motor.
    
    
• 7 inch wide by 14 foot long top belt.
  
  • Solid, modular interlocking plastic chain type belting.
    
    
  • Stainless steel side guides - easily removed if needed.
    
    
  • 1 HP motor with variable speed control.
    
    
• Food grade, stainless steel construction.
  
  

As of this writing, this 2-level INSPECTION BELT is in stock at Alard in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5141

PLASTIC BASKET SPIN DRYER,
20 gallon basket, up to 35 lb capacity, all stainless steel...

A refurbished Northstar Engineered Products (NSEP), better know as BOCK FP-35 "Mini Brute" SPIN DRYER, with light, easily hand-removable plastic basket; for industrial fresh-cut and pre-cut produce processing and packaging lines. This food grade stainless steel centrifugal dryer is an essential component of any fruit or vegetable cut, wash & dry production including commissaries, kitchens, farms and processors.

FEATURES:

• Manufacturer rated for up to 35 pound (dry weight) loads.
  
  
• Will come with one Rubbermaid Brute type 20 gallon plastic basket (on order, not shown in pictures) so it can be loaded and unloaded by hand, withOUT necessity of overhead winch.
  
  
  • This basket size fits easily under cutting machines, dewatering shakers plus other upstream feed equipment.
    
    
  • Baskets are available in a variety of colors and perforation sizes.
    
    
  • Call 315-589-4511 for pricing to your specification.
    
    
• Pneumatic self-raising lid for ease of operation.
  
  
• Stainless steel control box with safety interlock system, speed selector, start, stop and emergency stop.
  
  
  • Settable timer (inside the control box).
    
    
  • Centrifuge control system provides for electronic acceleration and dynamic braking to reduce cycle times for maximum productivity.
    
    
• 1.5 HP belt drive motor.
  
  
• Food grade sanitary stainless steel construction.
  
  
• 460 volt 3 phase electrical input.
  
  
• 80psi @ 0.5cfm compressed air required.

As of this writing, this BOCK FP35 spinner is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, ready-to-go and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fresh-cut / pre-cut produce packing equipment needs.

ALARD item reference #: Y5541

Gering 8-ROLL continuous
PEELER-WASHER-SCRUBBER
for fruits and vegetables,
stainless steel, hydraulic powered...

An eight-roll continuous abrasive peeler, scrubber, for onions, fruits and vegetables, including root crops such as potatoes, beets, carrots, parsnips, jicama, radishes, turnips and other products in the context of industrial food processing and pre-cut produce packing lines operations. Previously used as an onion peeler in a chopped onion processing line.

FEATURES:

• Currently configured with eight (8) abrasive grit 3 inch diameter rolls mounted parallel (in-line) with product flow - 1/2 inch gap between rolls.
  
  
• 26 inch wide by 20 inch long tapered infeed hopper.
  
  
• Lubricating and rinsing action are provided in the chamber by a dual stainless steel water spray pipe header with several uniformly spaced spray nozzles.
  
  
• Powered discharge metering auger controls retention time in the chamber.
  
  
• 57 inch high infeed, 42 inch discharge height - adjustable leg frame.
  
  
• Water, peels and debris drop to a full length bottom collection pan with 4 inch diameter center bottom outlet.
  
  
• Hinged top and side access doors.
  
  
• Food grade sanitary stainless steel construction frame and body (abrasive rolls are abrasive-coated steel).
  
  
• Includes 10 HP hydraulic pack.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this reconditioned abrasive roller is in stock at ALARD, in GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process fruit and/or vegetable peeling needs.

ALARD item reference #: Y5140

HIGH SHEAR MIXER,
food grade stainless steel,
hydraulic ram, 10 HP...

A Morehouse-Cowles Model W-24-10 DISSOLVER for dispersion, de-agglomeration & dissolving. A single shaft high-shear production mixer allows for processing of various batch sizes and viscosities, with rapid dispersion and emulsification of ingredients.

FEATURES:

• Manufacturer rated for 55 to 110 gallon batch and maximum 32 inch diameter tank.
  
  
• 2 inch diameter by 32 inch long mixer shaft.
  
  
• 12 inch diameter high shear impeller.
  
  
• Lift ram with 42 inch clearance in up position.
  
  
• Stainless steel food contacts.
  
  
• 10 HP motor with pulley varispeed for 600 - 2200 RPM.
  
  
• 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this high-shear emulsifier blender is in stock at ALARD, in GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process emulsifying and blending needs.

ALARD item reference #: Y5412

VACUUM FILLER / STUFFER...

A VEMAG Model Robot 500 Type 128/90 vacuum sausage stuffer. A continuous vacuum filling machine for ground meats, portioned doughs, pastes, spreads, soft cheeses, pet foods and other industrial food applications into trays, cups, cans, bottles, jars or tubs.

FEATURES:

• 23 inch diameter by 23 inch deep hinged cone infeed hopper.
  
  
• 58 inch infeed height with adjustable threaded rod feet.
  
  
• Double screw pump with mild steel feed worms.
  
  
• 3 inch diameter discharge with sani-thread fitting - hinged for ease of cleaning.
  
  
• Leg switch activated filling action.
  
  
• Onboard vacuum system.
  
  
• Control panel.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this Reiser Vemag vacuum filler is in stock at ALARD, in very good operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5421

RATIONAL AG Model CPC-61
"Self Cooking Center"
COMBI-STEAMER...

A muti-purpose cooking appliance for grilling, roasting, baking, steaming, stewing, blanching, and/or poaching meat, fish, poultry, vegetables, egg dishes, baked goods, desserts, in quantity. Combination ovens are widely used in the food service industry to provide a variety of cooking functions in a single appliance.  In addition to baking and roasting, a combination oven is also capable of steaming, proofing and reheating various food products. Foods can be cooked in a convection oven dry heat mode, a steam only mode, or a combination of dry heat and steam modes.

FEATURES:

• Oven interior area: 25 inches deep by 17.5 inches wide by 19.5 inches high.
  
  
• All food grade sanitary stainless steel construction and product contacts.
  
  
• Includes 6 half size sheet pans.
  
  
• Overall dimensions without stand 31 inches deep by 36 inches wide by 33 inches high.
  
  
• Electric oven heat, with 208 / 230 / 460 volt 3 phase electrical input.
  
  
• 2 inch top water inlet, manufacturer rated for 29.67 lbs water pressure, and a flow rate of 3.2 gallons a minute, minimum.  
  
  
• "Half size" combination oven with "ClimaPlus Control" manufacturer rated to automatically continuously measure and adjust the humidity level in the oven to the desired setting.
  
  
• Previously used in a food processing plant food laboratory for product development and quality assurance testing, and related pilot line testing applications.
  
  

As of this writing, this Rational model 61 Self Cooking Center is in stock at Alard, in very good condition, available for timely shipment. 

CALL ALARD at 315-589-4511 for current availability, and to discuss your food cooking equipment needs.

Alard item reference #: Y3112

52 gallon
steam-jacketed, pressure TANK,
food grade, stainless steel...

A BOWA GmbH 200 LITER (52 gallon) steam jacketed pressure vessel, process tank. A food grade, stainless steel vertical TANK, with dome top and dish bottom.

FEATURES:

• 31 inch diameter by 55.5 inch deep jacketed vessel.
  
  
• 25 liter (6.6 gallon) jacket - CE certified.
  
  
• Dome top:
  
  
  • Lugged center cover with rubber seal.
    
    
  • 2.5 inch and 3.5 inch Tri-clamp inlet ports.
    
    
• Dished bottom with 1.5 inch center bottom outlet.
  
  
  • Manual discharge valve.
    
    
  • Sanitary Tri-Clamp discharge connection.
    
    
  • 7 inch high discharge as configured on (4) stainless steel leg extensions.
    
    
• Jacket and internal pressure tagged for 58 psi.
  
  
• Air inlet, pop off valve and psi gauge.
  
  
• Portable - with rubber wheels for ease of mobility.
  
  
• All food grade sanitary stainless steel construction.
  
  

As of this writing, this jacketed pressure tank is in-stock at ALARD, in VERY GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y3787

GEA CFS Wolfking MIXER-GRINDER, Model TSMG-600/200-UNI, 600 liter, 40 HP

VIDEO DEMO
GEA CFS Wolfking MEAT MIXER-GRINDER,
Y5643 from Alard Equipment Corporation.

A GEA CFS Wolfking stainless steel meat mixer-grinder with twin shaft paddle mixer, bottom grinder feed auger, and barrel; all stainless steel.

FEATURES:

• MIXER
  
  
  • Dual shaft PADDLE mixer.
    
    
  • W-bottom mixing vessel is 48 inches long by 46 inches wide by 32 inches deep.
    
    
  • Nominal 600 liter capacity. Later models of this same size / capacity were redesignated with SFG850-200 model nomenclature and rated as 850 liters to match competitors rating system designations.
    
    
  • Hinged safety grid.
    
    
  • Dual (2) 5HP paddle agitator shaft drives.
    
    
• GRINDER
  
  
  • Stainless steel grinder barrel with stainless steel auger, cutting knife, and discharge end.
    
    
  • 40 HP 3 phase motor drive.
    
    
• MIXER-GRINDER
  
  
  • Equipped with bone & cartilage elimination system.
    
    
  • Food grade USDA sanitary stainless steel construction.
    
    
  • 460 volt 3 phase electrical input.
    
    
  • Complete but for a grinding plate, which is readily available to buyer specification.
    
    

As of this writing, this Wolfking TSMG600 MIXER-GRINDER is in stock at ALARD, in VERY GOOD operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process grinding requirements.

ALARD item reference #: Y5643