A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

July 2024 Archives

Food process METAL DETECTOR, 16x11 opening, Y5352

FOOD PROCESS METAL DETECTOR
with BELT CONVEYOR, 16x11 opening,
food grade, stainless
steel...

y5352g_crop_email.jpg

A refurbished LOCK METALCHEK Model Met 30+ metal detector, on a stainless steel thru-conveyor, with belt-stop alarm reject. A food grade belt transfer metal detection system for food processing and/or other industrial process applications.

 FEATURES:

  • y5352m_crop_email.jpg10.75 inch high by 15.75 inch wide USABLE aperture.

  • Stainless steel search head enclosure.

  • NEMA4 / IP65 digital operator control panel with 100 product presets.

  • Three-frequency levels allowing for optimal sensitivity across a wide range of food products / product  types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with a much wider range of products than a single frequency machine.

  • Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" into the equation; --however this LARGE-opening metal detector has been tested at Alard for a sensitivity of 2mm ferrous, 2mm non ferrous, and 2.5 mm stainless steel at 300 kHz.

  • Stainless steel conveyor frame, with:

    • 14 inch wide by 60 inch long plastic interlocking chain belt:

    • Right to Left product flow.

    • 68 feet per minute.

  • 36 inch working height with threaded rod adjustable feet.

  • Food grade sanitary stainless steel construction

  • Belt stop alarm reject.

  • 1/3 HP conveyor belt drive motor.

  • y5352o_crop_email.jpg110 volt single phase (household current) electrical input.


As of writing this the food grade metal detection system is in stock in excellent operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial process metal detector needs.

ALARD item reference #: Y5352

Lightnin MIXER, clamp-on, classic XD30, Y5857

Lightnin MIXER Model XD30,
portable, clamp-on
food grade agitator...

y5857e_crop_email.jpg


This SPXFlow Lightnin Classic Series small portable mixer Model XD30 clamp mount agitator is a time-proven classic design for mixing water, oils, brine and agitating other low viscosity (<500 cps) liquid applications.

FEATURING:

  • Manufacturer rated for 50 gallons (min) to 500 gallons (max) - dependent on viscosity, temperature, mix time & tank shape.

  • Lightweight, easy to handle.

  • Clamp mount with ball and socket adjusts 90 degrees vertically, 360 degrees horizontally.

  • y5857f_crop_email.jpgThree (3) blade prop mixer.

  • 1/2 inch diameter by 32 inch long stainless steel shaft.

  • 1/3 HP 1725 RPM Dura-Mix energy efficient direct drive motor.

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this clamp-on tank agitator is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5857

Urschel model J DICER, greens chopper, crouton cutter, Y5793

URSCHEL Model J DICER,
STRIP CUTTER, GREENS CHOPPER.


y5793f_crop_email.jpg

A two dimensional cutting machine for industrial food processing applications, manufacturer recommended for food products up to 1/2 inch (13mm) thick at infeed, such as spinach and greens, peppers, citrus peel, celery, broccoli, and parsley.

SPECIFICATIONS: Manufacturer literature specifies this model for cutting square or rectangular dices, with...

  • y5793g_crop_email.jpgCircular knives that can be spaced for cuts from 3/16 inch (4.763mm) to 3 inches (76mm), and...

  • ...a selection of crosscut spindles are available from the manufacturer for cuts from 1/4 inch (6.35mm) to 3 inches (76mm).

  • Strip cuts can be made by removing the crosscut knife spindle from the machine, with the length and thickness of the strips depending on the size of the original product.

This machine FEATURES:

  • Aftermarket safety interlock system with Allen Bradley control box, which disconnects power to the machine if safety guards are removed.

  • y5793j_crop_email.jpg9 inch (229mm) wide feed belt and cutting spindles.

  • Food grade stainless steel product contact surfaces, stainless steel tubular support frame, guards, shrouds & discharge chute.

  • 5 HP brake motor drive.

  • 208 / 230 volt 3 phase electrical input.


As of this writing, this reconditioned Urschel J dicer / strip cutter / greens chopper is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, needing only to be completed with cutting parts to buyer specification.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food processing needs.


ALARD item reference #: Y5793

150 gallon steam jackted PROCESS TANK, Y5807

STEAM-JACKETED PROCESS TANK with SWEEP AGITATOR, 150 gallon, stainless steel...

y5807i_crop_email.jpg

The ANCO EQUIPMENT Model BP-WT 150 wing-top BATCH PASTEURIZER TANK, process tank, is designed to heat & cool a variety of dairy, beverage and other liquid food applications. In the context of dairy industry use, this tank is manufacturer rated to both pasteurize and make cheese in one vat. As a 150 gallon jacketed, agitated process tank, it is applicable for a wide variety of food processing applications.

 

FEATURING:

  • y5807l_crop_email.jpg43 inch by 30 inch sloped bottom vessel.

  • Integral stainless steel bridge with multiple triclamp inlets and removable half-moon shaped lids.

  • Bottom anchor sweep agitator with gear reduced for 51 RPM.

  • y5807p_crop_email.jpg45 inch infeed height.

  • 2 inch Tri-clamp front bottom outlet with 14 inch high discharge.

  • Manufacturer rated for pasteurizing 1,290 pounds of milk per batch, but this jacketed process tank with sweep agitation is applicable to a wide range of industrial food processing applications.

  • The insulated, two-zone dimple-plate jacket is manufacturer rated for steam, glycol, or hot water, at 15 psi, and as also having been manufacturer tested for 70 psi / 30 gpm with glycol.

  • All food grade sanitary stainless steel construction.

  • 3/4 HP washdown stainless steel shrouded motor.

  • 208/230/460 volt 3 phase electrical input.

As of this writing, this Anco jacketed process tank with sweep agitation is in stock at ALARD, in LIKE NEW condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food process equipment and process tank needs.

ALARD item reference #: Y5807

Jayhawk STONE MILL, MUSTARD MILL Y5237

JAYHAWK MUSTARD MILL,
food grade, 7.5 HP...


y5237r_crop_email.jpg

 

The JAYHAWK Industrial Stone Mill Model 2MPY is a stone grinding mill, a type of colloid mill, for emulsifying, homogenization, dispersing & disintegrating of a variety of food applications including mustards, spices, hot sauces, condiments and more.

FEATURES:

  • 7.75 inch diameter proprietary diamond cut stones:

    • Shown without stones in pictures (see below). Stones are available in 46 or 60 grit per buyer specification.

  • Adjustment handle for stone gap to achieve desired grind size.

  • y5237za_crop_email.jpg1.5 inch diameter infeed.

  • 1 inch by 4 inch wide discharge.

  • 316 stainless steel grinding head, with holder frame included (to hold the head while swung open for cleaning).

  • 7.5 HP direct drive motor.

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this Jayhawk mustard mill is in stock at ALARD, in GOOD OPERATING condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.


ALARD item reference #: Y5237


Vemag VACUUM STUFFER, Robot 500 with PORTIONING controls, Y5383

VACUUM FILLER / STUFFER...

y5383l_crop_email.jpg

 

A VEMAG Robot 500 Type 128/230 vacuum sausage stuffer. A vacuum filling machine for ground meats, portioned doughs, pastes, spreads, soft cheeses, pet foods and other industrial food applications into trays, cups, cans, bottles, jars or tubs.

 

FEATURES:

  • 37 inch diameter by 32 inch deep hinged cone infeed hopper.

  • 67 inch infeed height with adjustable threaded rod feet.

  • y5383z_crop_email.jpgDouble screw pump with mild steel feed worms.

  • 3 inch diameter discharge with sani-thread fitting - hinged for ease of cleaning.

  • Leg switch activated filling action.

  • Onboard vacuum system.

  • PORTIAMAT analog portioning controls.

  • 208/230 volt 3 phase electrical input.


As of this writing, this Reiser Vemag vacuum filler is in stock at ALARD, in excellent operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5383

Olney ONION TOP AND TAIL TRIMMER, Y5180

ONION TRIMMER,
TIP and BUTT CUTTER,
CONTINUOUS high volume
topper-tailer...


y5180k_crop_email.jpg



An Olney Model 4 onion trimmer is a continuous semi-automatic onion trimmer for topping and tailing; a tip and butt cutter for trimming the ends off of onions.

OPERATION:

An operator manually places the product in feed fingers which are mounted on an endless chain. These pass through two circular knives that adjust themselves automatically to the different size product, permitting the same amount to be cut off each onion, regardless of size with a minimum of waste. Product may be placed in the feed fingers without regard to which side either the stem or root are facing, as long as they are oriented from side-to-side.

FEATURES:

  • Manufacturer rated for 50 to 70 onions per minute.

  • 4 inch diameter clamps suitable for 3 inch to 4.5 inch diameter onions.

  • y5180f_crop_email.jpgCutting blades automatically adjust to size of the product being cut within its size range - reduces waste but assures close trimming of stem & root.

  • 27 inch wide by 55 inch long by 9 inch deep product infeed hopper.

  • 35 inch long loading section.

  • 41 inch infeed height, 25 inch cut onion discharge height.

  • Food grade sanitary stainless steel construction, including frame & shrouding, with bronze onion clamps.

  • y5180n_crop_email.jpgStainless steel control box with start/stop controls and safety interlock system.

  • Two (2) 1/2 HP belt drive washdown motors.

  • 460 volt 3 phase electrical input.


As of this writing, this continuous onion trimmer is in stock at ALARD, in excellent operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular onion trimming machine needs.


ALARD item reference #: Y5180