A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

June 2023 Archives

Fitzpatrick Fitzmill Comminuting machine, DAO-6, item Y5477

FITZPATRICK INDUSTRIAL IMPACT MILL...

DEMO VIDEO
Fitzpatrick DAO-6, Fitzmill HAMMERMILL
Alard item Y5477
grinding peppers into paste,
from Alard Equipment Corporation.


Fitzmill Model DA06 comminutor hammermill for controlled particle size reduction...

FEATURES:

  • 21 inch long tapered stainless steel product infeed pan with 4 inch high sides feeding into the cutting chamber, via a 6 inch wide by 4 inch high throat.

  • 6 inch by 11 inch cutting / milling / comminution chamber, with horizontal shaft now fitted with two-sided swing hammers (other configurations of hammers, blades, etc, available optionally, call 315-589-4511 to discuss your cutting specifications), over an interchangeable sizing screen. Screen perforation size and shape determines particle size reduction.

  • 5.75 inch by 15.5 inch oval discharge with bag holding ring.

  • 58 inch infeed height, 33 inch discharge height.

  • Stainless steel electrial control panel with safety interlock system, operator on/off controls, 208/230 volt 3 phase electrical input.

  • Food grade stainless steel product contact surfaces.

  • Aluminum base on painted steel legs.

  • 5 HP 230/460 volt 3 phase drive motor.

  • Belt pullies on head shaft allow for different speed settings depending on which sheave the belt is placed.


As of this writing, this comminuting machine is in stock at Alard in VERY good operational condition, available for immediate shipment. CALL ALARD at 315-589-4511 for current availability, and to discuss your particular food process particle size reduction needs.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process particle size reduction machine needs.

Alard Item Reference #:Y5477

Bock / NSEP WATER JET TURBULENT VEGETABLE WASHER, Alard Y5550

North Star Engineered Product (NSEP) Model HW2600
HELICAL WASH SYSTEM,
turbulent washer, laminar flow fruit and vegetable wash flume,
food grade, stainless steel, Y5550



DEMO VIDEO
North Star Engineered Product HW2600 HELICAL WASHER, Y5550
from Alard Equipment Corporation.


A North Star Engineered Product (NSEP) Model HW2600 Series HELICAL WASH SYSTEM is a turbulent-flow IMMERSION WASHER FLUME with water-jet agitation for gentle but forceful washing for pre-cut fruits and vegetables, including cut or whole leafy greens, including delicate leaf products like spinach, baby spinach, spring mix and other pre-cut produce food products.



FEATURES:

  • The laminar-flow HELICAL WASH FLUME is 66 inches long by 20 inches wide by 24 inch deep U-trough with adjustable agitating water jets.

    • Three (3) forward facing "push" nozzles..

    • Four (4) "vortex" nozzles located along the left hand side.

  • The wash tank overflows onto a 91 inch long by 16 inch wide ELEVATING DISCHARGE CONVEYOR with an interlocking chain type belt with fine perforations to allow the water to pass through while discharging the dewatered product onward.

  • Conveyor powered by a .5 HP stainless steel shrouded motor.

  • The water falls through into a stainless steel catch and balance tank equipped with:

    • Recirculation Pump powered 3HP drive motor.

    • Check Valve keeps the wash tank water from draining into the wash tank when the pump is shut off.

  • Stainless steel factory control box with variable speed control.

  • All food-grade sanitary stainless steel construction.

  • Water jet nozzles are removable for sanitation.

  • 460 volt 3 phase electrical input.


As of this writing, this spiral-flow washer is in stock at ALARD, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your fresh-cut produce packing and processing equipment needs.

Alard item reference #: Y5550

Urschel TRANSLICER, 25 inch, Y5554

DEMO VIDEO
URSCHEL TRANSLICER CUTTER,
with 25 inch cutting head...



VIDEO DEMO
cutting heads of iceburg lettuce...
Urschel TRANSLICER CUTTER, 25 inch cutting head,
from Alard Equipment Corporation item Y5554


The Urschel TRANSLICER 2500 series SLICER is a two (or optionally three) dimensional cutter with a large interchangeable 25-inch cutting wheel allowing for very high speed cutting of large, leafy vegetables and fresh-cut fruits without pre-cutting. Very high capacity for industrial food factory, food processing applications. Manufacturer rated for a wide range of food products including romaine and iceburg lettuce, cabbage, celery, melons, peppers, potatoes, carrots, cucumbers, pineapple, onions, spinach, and certain meats.



FEATURES:

  • Manufacturer rated for large fruit and vegetable products up to:

    • Compressible food products up to 8 inches (203mm) in diameter.

    • Firm round products (e.g. cabbage) up to 6.75 inches (171mm) in diameter.

  • Unless otherwise specified, this machine will be priced to include ONE 25-inch cutting wheel from the range of cutting wheels Alard has available in stock. Call 315-589-4511 to discuss your particular cutting specification.

  • The pitch, number of knives, and belt-speed determine the cut. A full range of cutting parts are available from the manufacturer for:

    • FLAT SLICES from 1/32 inch (.8mm) to 3.5 inches (88.9mm).

    • JULIENE CUTS (2-dimensional) cuts from soft products from 3.8 inch (9.5mm) by 1/8 inch (3.2mm) up to 2 inch (76.1mm) by 2 inch (50.8mm); and...

    • SHRED CUTS ranging from 3/8 inch (9.5mm) to approximately 3 inches (76.1mm) in length, and 1/32 inch (.8mm) to 9/32 inch (7.1mm).

  • Two high-speed feed belts sloped to form a "V-Belt" cross-section.

    • First belt orients and accelerates the product.

    • Second belt is synchronized with the speed of the cutting head to achieve the desired slice thickness.

  • Food grade sanitary stainless steel construction.

  • Complete with factory electrical control panel with variable speed controllers, and an electronic safety interlock system integrated with brakemotor drive.

  • 208 / 230 volt 3 phase electrical input.


As of this writing, this Urschel Translicer with a 25 inch cutting head is in stock in excellent operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial capacity food factory cutting equipment need.

Alard item reference #:Y5554

Gooseneck elevating belt CONVEYOR, Y4755

ELEVATING CONVEYOR BELT,
12 inch wide, 17 feet long,
food grade, all stainless steel.

y4755c_crop_email.jpg


A food grade stainless steel incline feed conveyor for food processing applications, in a goose-neck configuration with a horizontal in-feed and loading section...


FEATURING:

  • y4755e_crop_email.jpg12 inch wide by 17 foot long interlocking chain plastic belt.

  • 1 inch high cleats on 10 inch centers.

  • y4755d_crop_email.jpg9 foot long horizontal infeed section followed by 8 foot long elevated discharge.

  • 6 inch high infeed, 54 inch discharge height.

  • Operator control box with ON/OFF.

  • 3/4HP stainless steel shrouded motor with aluminum gearbox..

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this elevating belt conveyor with horizontal packing in-feed section, is in stock at ALARD, in VERY GOOD condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing and packaging bulk food handling needs.

ALARD item reference #: Y4755

Preservative solution application tank, food grade, stainless steel Y4757

FRUIT & VEGETABLE DIP TANK / WASHER,
WET HOPPER-FEEDER,
food grade stainless steel.


y4757a_crop_email.jpg


A food grade stainless steel wet hopper with elevating belt discharge conveyor, for applying preservative solutions, rinsing, and / or washing fruits and / or vegetable products in the context of an industrial food processing or pre-cut produce packing operation.



FEATURING:

  • y4757d_crop_email.jpg20.75 inch wide by 28 inch long by 31 inch deep tank with 2 inch diameter threaded inlet/outlet.

  • 12 inch wide by 60 inch long steep incline belt with flights of four (4) 2.75 inch long stainless steel "lifting" fingers set 2.5 inches apart on 8.5 inch centers.

  • y4757c_crop_email.jpg16 inch wide by 5 foot long discharge chute with 5 inch high sides and overhead spray bar.

  • 50 inch high infeed, 32 inch discharge height - as currently configured.

  • Operator control box with ON / OFF and E-stop.

  • 3/4 HP stainless steel shrouded motor with aluminum gearbox.

  • All food grade sanitary stainless steel construction.

  • 208/230/460 volt 3 phase electrical input.


As of this writing, this food grade sterilization solution dip tank / washer is in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process fruit & vegetable washing and/or sanitizing needs.

ALARD item reference #: Y4757

About this Archive

This page is an archive of entries from June 2023 listed from newest to oldest.

May 2023 is the previous archive.

July 2023 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)