A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

January 2024 Archives

HOPPER-FEEDER BELT, elevating, Y4381

with elevating belt conveyor,
food grade, stainless steel.

elevating feed belt, item Y4381
from Alard Equipment Corporation.

A Heinzen / HMI raw product infeed hopper with elevating belt discharge / belt feeder for bulk raw product infeed; to discharge an even product flow to your downstream processing and packaging equipment.


  • NEW 26 inch wide by 11 foot long rubber belt.

  • 48 inch wide by 26 inch deep stainless steel flared infeed hopper.

  • 49 inch high infeed, 52 inch discharge height - adjustable threaded rod feet.

  • Top mount 1HP stainless steel roller drive geared for 78 feet per minute belt speed.

  • All food grade sanitary stainless steel construction.

  • 208 / 230 / 460 volt 3 phase electrical input.

As of this writing, this inclined conveyor hopper-feeder is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4381

BAG PACKING TABLE, 2-station, Alard BT2020, item Y5693

2-station, food grade stainless steel,
for fill by weight, with scales & bag holders...


An Alard Model BT2020 2-spout food grade stainless steel net-weigh bag filler table with weigh scales and bag holders for bag-filling of precut produce by weight, such as freshcut vegetables, leafy salad mixes, florets and fresh peeled whole products.


  • This stainless steel two-person BAGGING TABLE measures 43 inches long by 75 inches wide with sides that taper from 13.75 inches high at the back down to 5.75 inches in the front.

  • y5693_crop_email.jpgThis bag filling manual pack table features an angled back to feed product closer to the operator's reach. The flat-bottom portion of the table is only 29.5 inches in depth (from front to back), while the angled back-stop allows for additional full-load capacity.

  • Two (2) 30lb electric washdown scales with over-under remote readout display head mounted at eye level; one for each hand-packing station.

  • Each bag-filling station has a standard 6.5 inch diameter filling tube, which can be fitted with an optional stainless steel filling funnel for smaller bag sizes.

  • y5693f_crop_email.jpgEach filling tube is equipped with a stainless steel pneumatic bag holder to keep the bag held in position during the bag-filling process.

  • Beneath each bag holder is a 10 inch deep (front to back) by 12 inch wide (side to side) stainless steel weigh cell platform which is height adjustable to accommodate different bag lengths.

  • All food grade sanitary stainless steel construction.

  • 110 volt single phase (household current) electrical input.

  • Compressed air required for the pneumatic bag holders.

  • NEW - not a pre-owned piece.


  • y5693d_crop_email.jpgEach operator hangs a bag on their filling funnel and engages the bag holder by pressing a button.

  • The operator then pulls product from the table into the filling tube until the proper weight is made.

  • Overages can easily be removed.

  • The operator then disengages the bag holder and removes the bag, puts a new bag in place & the bag packing process is repeated.

As of this writing, this bag filler table is in stock at Alard, now, fully assembled and ready-to-go for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y5693



for potatoes, carrots, and other fruits and vegetables,
stainless steel, in-stock NEW...


A versatile continuous brush washer for scrubbing ROOT CROPS. Offered here with brushes as a continuous four roll brush-washing scrubbing and/or pickle washing machine. It can also be fitted with any combination of brushes and/or abrasive rolls for peeling, brush washing, scrubbing, or finishing (e.g. in combination with another peeler, scrubber, or steam peeler) of fruits and vegetables such as potatoes, beets, carrots, onions, cucumbers, pickles, apples, oranges and other raw fresh produce items


Raw product is continuously fed to the brush-washing / peeling chamber and subjected to the spinning rolls (abrasive and/or brushes as the case may be). It is important that a sufficient amount of product be kept in the peeling chamber during operation for best results. Lubricating and rinsing action are provided in the chamber by overhead sprays, while the flow of product through the machine is regulated both by a weighted discharge door, and the inclination of the machine. The water spray, rotating brushes and friction of the products rubbing against each other tumble and turn the product so that it is thoroughly scrubbed from every conceivable angle.


  • 15 inch by 27 inch top hopper inlet opening in the hinged stainless steel cover at 57 inch infeed height.

  • y5592j_crop_email.jpgCurrently configured with four (4) .018 black poly brush rolls for removing field dirt, debris, peel and rot spots, as well as other washing, scrubbing, and finishing applications. Can be set up with any combination of abrasive or brush rolls to buyer need / specification for stronger or gentler peeling, scrubbing, action. Call 315-589-4511 to discuss your particular scrubber, washer, peeler application.

  • Each spinning brush roll is 6 inches in diameter by 6 foot long.

  • Lubricating and rinsing action are provided in the chamber via a stainless steel water spray pipe header with spray nozzles.

  • y5592f_crop_email.jpgScrubbed, polished, peeled product discharges through a stainless steel discharge flapper-gate which is adjustable so product can be subjected to a longer or shorter peeler / washing exposure; --at a 39 inch discharge height.

  • Water, dirt, stems, leaves, peels, and other debris drop to a full length stainless steel water catch pan with a 6 inch by 6 inch center bottom outlet. CALL 315-589-4511 to discuss your water reclaim screen requirements.

  • Capacities run in the ton-per-hour range more or less, depending on product and application (peeling, washing) and the degree of finish desired.

  • The abrasive brush rolls are mounted parallel (in-line) with product flow.

  • Complete with central lubrication cluster for ease of maintenance.

  • y5592_crop_email.jpgChain / sprocket drive powered by a WASHDOWN 3HP 208 / 230 / 460 volt 3 phase 60 cycle constant speed motor.

  • We recommend an optional "soft start" variable speed controller in a gasketed PVC NEMA 4 control box - call 315-589-4511 for current pricing.

As of this writing, ALARD EQUIPMENT has this model available NEW in stock and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular fruit and / or vegetable peeling and washing equipment needs.

ALARD item reference #: Y5592