A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

October 2023 Archives

Vibratory FEED CONVEYOR, Y5034

VIBRATING FEEDER,
DEMONSTRATION VIDEO
vibratory shaker-feeder, food grade,
all stainless steel.


VIDEO DEMO
Key Iso-Flo VIBRATING FEEDER, Y5034
from Alard Equipment Corporation
.


Key Iso-Flo vibratory conveyor for even-feeding to downstream equipment, such as a radial combination scale, cutting machine, filling machine, peeling machine or whatever food processing or packaging equipment.


FEATURES:

  • Vibrating conveyor bed measuring 90 inch overall length by 18 inch wide.

    • Smooth flat stainless steel contact surfaces.

    • 6 inch high sidewalls.

    • Half-moon shaped discharge.

  • Mounted on stainless steel legs with isolation springs. Can also be mounted from overhead, e.g. suspended from the ceiling, such as for feeding a radial combination scale. Call 315-589-4511 to discuss your particular bulk food product conveying and feeding requirements.

  • 32.5 inch infeed height, 23 inch high discharge.

  • All food grade sanitary stainless steel construction.

  • New style Key Iso-Flo eccentric drive.

  • 1HP belt drive motor with adjustable pulleys to increase/decrease shake.

  • 208/230/460 volt 3 phase electrical input.


As of this writing, this vibrating shaker-feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition; available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process bulk food conveying / feeding needs.

ALARD item reference #: Y5034

Key Iso-Flo VIBRATORY FEED CONVEYOR, Y5036

Key Iso-Flo VIBRATING FEEDER,
VIDEO DEMONSTRATION,
vibratory shaker-feeder, food grade, all stainless steel.

DEMO VIDEO
Key Iso-Flo VIBRATORY FEEDER, Y5036
from Alard Equipment Corporation.


Key Iso-Flo vibratory conveyor for even-feeding to downstream equipment, such as a radial combination scale, cutting machine, filling machine, peeling machine or whatever food processing or packaging equipment.

FEATURING:

  • Vibrating conveyor bed measuring 102 inch overall length by 18 inch wide.

    • Smooth flat stainless steel contact surfaces.

    • Removable 18 inch by 18 inch section.

    • 6 inch high sidewalls.

  • 10 inch diameter bottom end discharge with 4 inch long discharge chute.

  • Flexible mounting options: Last used and currently configured as a ceiling mounted shaker to feed a scale, but can be equipped with legs (at extra charge) for floor mounted operation; depending on your particular production line configuration and need. CALL 315-589-4511 to discuss your particular bulk food product conveying and feeding requirements.

  • All food grade sanitary stainless steel construction.

  • Four (4) mounting springs included.

  • New style Key Iso-Flo eccentric drive with 1HP motor.

  • 208/230/460 volt 3 phase electrical input.


As of this writing, this vibrating shaker-feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition; available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process bulk food conveying / feeding needs.

ALARD item reference #: Y5036

MELTING KETTLE for chocolate, butter, etc. Y5668

CLEVELAND RANGE Model KEL-40T,
40 GALLON SELF-CONTAINED ELECTRIC
316T STAINLESS STEEL TILT KETTLE.

y5668u_crop_email.jpg

A 40 gallon capacity electric-fired kettle with tilt-to-dump discharge and side bottom outlet with valve.



FEATURES:

  • y5668w_crop_email.jpg41.5 inch diameter by 37.75 inch deep hemispherical bottom vessel.

  • Side bottom outlet with manual valve.

  • Crank tilt to dump with pour lip.

  • Steam jacket manufacturer rated for 50 psi @ 298F, "U" stamped and National Board Coded.

  • Energy-saving hinged stainless steel top cover with lift handle.

  • 39.5 inch infeed height.

  • y5668s_crop_email.jpgFood grade sanitary corrosion-resistant 316T stainless steel construction.

  • Self-contained / integral electric heater complete with thermostatic control:

    • Two (2) out of three (3) elements are operational.

    • Suitable for melting and other lower heat applications.

  • 208/230 volt 3 phase electrical input.


As of this writing, this Cleveland Range 40 gallon electric cooking kettle is in stock at ALARD, in GOOD condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process cooking kettle needs.

ALARD item reference #: Y5668

CMI ONION SLICER, Y5658

CMI ONION SLICER / PEPPER SLICER / TOMATO SLICER,
food grade, stainless steel.

y5658a_crop_email.jpg


A CMI Model OS-S a waterfall style slicing machine with four (4) feed tubes over a curved rotating blade spinning at low RPMs. With each feed tube a different diameter, this vegetable slicer is manufacturer recommended for a range of products including cutting onion rings, onion slabs, peppers, cucumbers, tomatoes, mushrooms, oranges and more.


FEATURES:

  • Manufacturer literature states this onion slicing machine is capable of cutting over 500 pounds per hour.

  • y5658c_crop_email.jpg18 inch diameter horizontally mounted slicing blade.

  • Manually adjustable 1/8 inch to 1/2 inch slice thickness.

  • 66 inch high infeed, 43 inch discharge height.

  • Operator On/Off switch.

  • All food grade stainless steel construction including tubular support frame.

  • 1/2 HP belt drive washdown motor.

  • 110 volt single phase electrical input.


As of this writing, this commercial grade, industrial grade fruit & vegetable slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food slicing needs.

ALARD item reference #: Y5658

Doboy BAG SEALER, Model CBS-B, Alard item Y5662

CONTINUOUS BAND BAG SEALER...

y5662k_crop_email.jpg

A Doboy Model CBS-B continuous band bag sealer manufacturer rated for sealing bags and pouches with a secure hermetic seal using a variety of materials, including poly and other soft films.

FEATURES:

  • y5662m_crop_email.jpgRight to Left product flow.

  • 1/4 inch seal.

  • 1 inch wide carrier bands.

  • 7.5 inch long air-cooled sealing bars.

  • Front & back seal-bar digital temperature adjustment.

  • Variable speed control for up to 325 feet per minute.

  • Hand crank adjustable painted mild steel stand.

  • 460 volt 3 phase electrical input.

As of this writing, this Doboy Band Sealer is in stock at ALARD, in GOOD condition and being sold AS-IS for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food packaging needs.

ALARD Item Reference #: Y5662

Quadro Ytron INLINE POWDER DISPERSER, high shear, Y5701

Quadro Ytron LD-1 INLINE POWDER DISPERSER,
POWDER-LIQUID HIGH SHEAR MIXER.



y5701n_crop_email.jpg



A Quadro YTRON model LD-1 high-speed powder disperser is a high-shear liquid-powder mixer for continuous inline dispersion of powders into a liquid stream. Similar to a Tri-Clover Tri-Blender hybrid powder mixer. Specifically designed to mix & disperse difficult to wet powders, up to 25% concentration, in a single pass. Powders are drawn by a Venturi vacuum effect into the mixing chamber where they are sheared, without over-processing, into the liquid phase before hydration takes place. Molecular structure remains undamaged so the result is a smooth, consistent, lump-free slurry. Manufacturer recommended for jam, egg substitute, salad dressing, syrup, condiments, gums & stabilizers plus pet food, pharmaceutical, cosmetic and chemical applications.

FEATURES:

  • Manufacturer rated for 10 to 20 gallons per minute liquid capacity.

  • y5701e_crop_email.jpg3.5 inch diameter shear head.

  • 17 inch diameter by 32 inch deep steep-walled conical dry product infeed hopper.

  • Full port ball valve option for improved powder flow.

  • 7/8 inch diameter liquid infeed, 7/8 inch diameter blended product discharge -ball Triclamp connections.

  • 59 inch infeed height, 15 inch high discharge.

  • Food grade sanitary stainless steel, manufacturer rated for USDA and 3A dairy sanitary standards.

  • 7.5HP drive motor.

  • 460 volt 3 phase electrical input.


As of this writing this Quadro Ytron Powder Disperser / inline liquefier is in stock at ALARD, in LIKE NEW operational, mechanical, electric & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5701

Small INCLINE CONVEYOR, Y2223

ELEVATING BELT CONVEYOR / INCLINE CONVEYOR,
9x8 food grade stainless steel.

y2223_crop_email.jpg


A 8 inch wide by 9 foot long cleated belt elevating conveyor for food processing applications.


FEATURES:

  • y2223a_crop_email.jpgAvailable as-is with existing worn-out cleated belt, or can be supplied with a new food grade belt with 1 inch high cleats on 8 inch centers.

  • Belt runs between 5 inch high stainless steel sides.

  • Belt discharge height 52" with existing legs.

  • Food grade stainless steel construction.

  • 2 HP 208/230 volt 3 phase stainless steel motor.


As of this writing, this incline conveyor belt is in stock in operational condition available as-is for immediate shipment; --or can be (at additional cost) serviced by our shop to excellent condition prior to shipment, per buyer preference.

Alard Item Ref. #:Y2223

Carousel ONION SLICER, Y5665

Gering
CAROUSEL ONION SLICER,
onion slab slicer, food grade, all stainless steel.


y5665b_crop_email.jpg


This Gering onion slicing machine is a semiautomatic waterfall style cutting machine with a pocketed rotating carousel to hold and carry onions over powered dual circular knife blades for clean, uniform & consistent slices, e.g. for industrial production of onion slabs or onion rings in a food processing or freshcut produce processing production line.



FEATURES:

  • y5665g_crop_email.jpg36 inch diameter UMHW carousel with ten (10) 4 7/8 inch diameter pockets.

  • Two (2) 10 inch diameter horizontal cutting blades.

  • Wrench adjustable slice thickness.

  • Dimpled / Non-Stick side discharge chute.

  • y5665d_crop_email.jpgAll food grade stainless steel construction.

  • Two (2) 1/2 HP drive motors - knives and carousel carrying wheel.are powered separately.

  • 110 volt single phase electrical input.


This dual rotary blade CAROUSEL ONION RING SLICER is currently in stock at ALARD, in VERY GOOD condition and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food slicing needs.

ALARD item reference #: Y5665

Key Farmco SSR SLIVER REMOVER, Y5670

KEY / FARMCO SSR ROLLER GRADER,
food grade, stainless steel.

y5670v_crop_email.jpg
The Farmco Key model SSR sizer, sliver-remover, is manufacturer recommended to transfer and classify product efficiently while removing field debris, broken pieces, seeds, juice, fines,slivers, chips, and other targeted material. Features on-the-fly tuning / size-adjustment for precision sizing and grading; dejuicing and deseeding; and removing debris. This roller size grader operates efficiently for both small whole products and pieces such as cubes, dices, slices, wedges, fries, spears, sticks, and julienne strips.



FEATURES:

  • 6 inch long dimpled infeed pan.

  • Seven (7) 4.5 inch diameter flat sided stainless steel rolls.

  • y5670o_crop_email.jpgRoller bed measures 48 inches wide by 30 inches long.

  • Sieve range of approximately 1/10 inch to 5/8 inch (2mm to 16mm).

  • Manual crank adjustment of sieve for sieve size adjustment on the fly.

  • 8 inch long dimpled discharge pan.

  • 1 HP stainless with gear reducer to 176 RPM.

  • Food grade sanitary stainless steel construction.

  • 208/230/460 volt 3 phase electrical input.


As of this writing, this roller size grader, fines remover, is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your particular food product grading equipment needs.

ALARD item reference #: Y5670

CABBAGE CUTTER for saurkraut, cole slaw, SLICER, Y5435

COMMERCIAL CABBAGE CUTTER, 26 INCH,
industrial-capacity food grade stainless steel
vegetable SLICER / SHREDDER / STRIP CUTTER.

y5435za_crop_email.jpg



A Commercial Slicer Model 26NS, also known as a "Waterfall" slicer or Kibbey cutter, has long been the mainstay of the coleslaw and sauerkraut industries. Manufacturer recommended for industrial capacity tons-per-hour throughput running lettuce, cabbage, onions, peppers, cucumbers, potatoes, carrots, tomatoes and celery.


FEATURES:

  • 26 inch diameter aluminum frame cutting disk with stainless steel knives - 100% cutting surface.

  • y5435zm_crop_email.jpgFlared in-feed hopper, tapered hopper discharge.

  • "Three cup" counter-rotating aluminum carrying arm pusher-plow to prevent rolling and maximize throughput capacity.

  • Open infeed to easily accept heads of cabbage, lettuce and other whole vegetable products up to 9 inch diameter.

  • Manufacturer rated for up to 25,000 pounds per hour (depending on cut size and product).

  • Set with 1/8 inch wide by 2 inch long shred cutting knives:

    • A range of cutting disk and blade configurations are available for one and two-dimensional cutting (slices, strip cuts, julienne cuts) in thicknesses from 1/32 to 2 inch and up to 5 inch in length.

    • Grater blades are also available for shredding carrots, slaw, onions, and other fresh vegetables.

    • CALL 315-589-4511 to discuss your particular industrial food process vegetable cutting / cut size specification.

  • y5435zh_crop_email.jpg70 inch infeed height.

  • Food grade stainless steel construction, including tubular stainless steel frame.

  • Two (2) 1.5HP gear-motor washdown drives - cutting wheel & plow powered separately.

  • 208 / 230 / 460 volt 3 phase electrical input.


As of this writing, this capacity slicing and strip cutting machine is in-stock in excellent, refurbished condition , available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process fruit and vegetable slicing and strip cutting needs.

ALARD item reference #: Y5435

DISINTEGRATOR, HAMMER-MILL, 50HP, Y5297

CORENCO DISINTEGRATOR Model M15DA, 50 HP,
food grade stainless steel hammermill, grinder...

y5297p_crop_email.jpg


A 15-inch Corenco DISINTEGRATOR manufacturer recommended for grinding, shredding, delumping, homogenizing, fine dispersing or fine pulping of wet & dry products. Nearly identical in design to a Rietz Bepex Disintegrator, this Corenco mill is built for particle size reduction in food grade high-capacity industrial production environments, such as grinding, pureeing, granulating, pulverizing, and wet grinding, in fruit & vegetable processing, nutraceutical, chemical and pharmaceutical applications.


FEATURES:

  • y5297zc_crop_email.jpgManufacture rated for approximately 30 tons per hour of apples.

  • Currently equipped with grater/shred screen.

  • 21 inch diameter by 7 inch deep cone infeed.

  • 15 inch rotor diameter.

  • Two (2) paddle impeller.

  • 16 inch by 8 inch rectangular flanged discharge.

  • Food grade sanitary stainless steel construction.

  • 50 HP belt drive motor.

  • 3 phase electrical input.

  • New 2021.


As of this writing, this food grade stainless steel disintegrator mill is in stock at ALARD, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process particle size reduction needs.

ALARD item reference #: Y5297

Alard ELEVATING FEED CONVEYOR, Y5516

ALARD ELEVATING BELT CONVEYOR
ELEVATING FEED CONVEYOR with HOPPER,
12 inch wide cleated belt,
food grade, stainless steel...

y5516g_crop_email.jpg


We built the Alard elevating feed conveyor with cleated belt as a peeler-feeder, peeling machine feeding belt conveyor, to even-feed fruit and vegetable products including apples, beets, carrots, cucumbers, potatoes, onions, beets and other root crop vegetables to our Alard 4-roll peeling machine (not included). This incline feed conveyor is also widely applicable to feed all manner of downstream food processing or packaging equipment in the context of a produce packing or other industrial food processing production line.

FEATURES:

  • 32 inch wide by 16 inch long tapered stainless steel feed hopper.

  • y5516h_crop_email.jpg12 inch wide by 8.5 foot long solid interlocking plastic chain type cleated belt..

    • The belt has 2 inch high cleats on 6 inch centers to carry fruit and vegetable food products up this incline conveyor.

    • The belt runs between 7.5 inch high sides flared to 17 inches wide at the tops.

  • This feed conveyor with tapered in-feed hopper is configured at an optimal discharge height for feeding an ALARD 4-roll pickle washer, scrubber, abrasive peeler / brush-washer (not included):

    • Comes set for a 33 inch in-feed height, 66 inch high discharge.

  • y5516f_crop_email.jpgAll food grade sanitary stainless steel construction.

  • Flanged discharge for easy mounting of an additional (optional) add-on discharge chute.

  • Adjustable threaded rod feet.

  • Top mounted 1 HP stainless steel shrouded drive motor, with aluminum gearbox.

  • 208 / 230 / 460 volt 3 phase electrical input.

  • Variable speed controller available at extra charge.


As of this writing, this elevating belt conveyor with hopper in-feed is NEW in stock at ALARD, and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food processing and packaging bulk food handling needs.

ALARD item reference #:Y5516

BIN DUMPER, floor level infeed, for 40x48, stainless steel, Y5527

BIN DUMPER / TOTE DUMPER,
Food Grade Stainless Steel,
FOR 40 by 48 inch bins,
hydraulic powered; --IN STOCK NEW.

y5527b_crop_email.jpg

Alard model BD40 food grade stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.


FEATURES:

  • Sized for standard 40 inch by 48 inch bin, or smaller, with bin holder measuring 45.75 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • Food grade stainless steel dumper construction, including heavy duty tubular stainless frame.

  • y5527e_crop_email.jpgDump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.


As of this writing this NEW forward bin dumper is in stock at Alard, ready to go and available from inventory for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5526

Forward BIN DUMPER, up to 40 x 48 tote, Y5526

BIN DUMPER / TOTE DUMPER,
Food Grade Stainless Steel,
for 48 by 48 inch bins (or smaller),
hydraulic powered; --IN STOCK NEW.

y5526c_crop_email.jpg

Alard model BD48 food grade stainless steel forward bulk box dumper, for discharging vegetables, fruits, food products, or other bulk materials from heavy bins, crates, totes, and/or Gaylords. Typically used as a raw product infeed dumper for industrial food processing applications. In stock new and available for fast delivery.


FEATURES:

  • Sized for standard 48 inch by 48 inch bin, or smaller, with bin holder measuring 54 inches wide by 48 inches long by 42 inches deep.

  • Manually adjustable hold-down bar with adjustment steps for 28.5 inches high, 35.5 inch bin height, and 53.5 inches high bin clearance. Other hold-down settings can be provided on request; --CALL 315-589-4511 with your tote size specifications.

  • Food grade stainless steel construction.

  • Heavy duty tubular stainless frame construction.

  • y5526a_crop_email.jpgDump action provided by (2) 3.5-inch diameter hydraulic cylinders powered by a self-contained 2HP hydraulic power pack with reservoir and manual controls, set for 208 / 230 / 460 volt 3 phase electrical input (unless otherwise specified).

  • Comes set for FLOOR LEVEL INFEED with a 38 inch pivot point and a 40 inch dump height from the edge of the dumper in a 45 degree fully inverted position (overall height and dump height from bin depend on the height of the bin). Support stands to raise the height of the dumper are available as an option and will be quoted upon request, based on customer specifications.


As of this writing this NEW forward bin dumper is in stock at Alard, ready to go and available from inventory for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food grade bulk material handling needs.

Alard item reference #: Y5526

Unifiller 1000i single PISTON FILLER, Y5366

SINGLE PISTON VOLUMETRIC FILLER - DEPOSITOR.

y5366b_crop.jpg


A Unifiller Model 1000i Powerlift filling machine is a pneumatically operated food grade stainless steel food depositor and filling machine for filling containers, or for use as an ingredient depositor for adding sauces or other liquid food ingredients to other food products. Fills viscous liquids such as sauces, creams, pastes, and oils, including products with particulates such as salsa.

FEATURES:

  • Manufacturer rated for particulates up to 3/4 inch diameter.

  • Capable of up to 140 cycles per minute.

  • Cut-off on fill nozzle for drip-free filling..

  • y5366g_crop_email.jpgAir actuated piston:

    • 3 inch diameter by 10 inch long stroke piston.

    • 0.5 to 36 ounce fill per stroke.

    • Manual crank volume adjustment - no tools required.

    • Remote foot switch activated.

  • y5366j_crop_email.jpgEquipped with a work table / product shelf.

  • 21 inch diameter by 20 inch deep conical product hopper.

  • Support frame with pneumatic height adjustment.

  • All food grade sanitary stainless steel construction.

  • Full washdown design.

  • Mounted on casters for ease of mobility.

  • 4 cfm @ 80 psi compressed air input required for operation.

  • Wide selection of attachments are available direct from the manufacturer.


As of this writing, this refurbished Unifiller single head piston filler is in stock at ALARD, in EXCELLENT operational, mechanical, pneumatic & cosmetic condition, ready-to-go for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5366

Urschel model GK-A DICER, french fry cutter, Y5603

URSCHEL Model GK-A DICER,
strip cutter, French fry cutter, flat or crinkle cuts.

y5603e_crop_email.jpg

The Urschel GK-A is a three dimensional cutting machine, manufacturer rated for product input size of up to 5.5 inches (140mm) in any dimension. Manufacturer recommended for uniform flat or crinkle cuts, for dices, cubes, French fry strips, julienne cuts and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions.

  • y5603_crop_email.jpgSlice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.

  • Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 (76mm) inches -- change part.

  • By removing the crosscut knife spindle and / or the circular knife spindle(s) the Urschel GKA can also cut strips (two-dimensional cuts) such as for french fries and slices (single dimensional cut).

  • Use of flat cut or crinkle cut knives determine flat or crinkle cut output.

  • We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to discuss your cutting specifications!


FEATURES:

  • y5603l_crop_email.jpgStainless steel slice shell and impeller with 10 inch slice shell opening.

  • All food grade USDA sanitary stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.

  • Factory control box with safety interlock system.

  • 2 HP drive motor.

  • 208/230 volt 3 phase electrical input.


As of this writing, this reconditioned Urschel GKA dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process capacity fruit & vegetable cutting equipment needs.

ALARD item reference #: Y5603

10 gallon 316L stainless steel TANK with agitator, Y5389

10 gallon VERTICAL TANK with Lightnin mixer,
single wall, food grade 316 stainless steel.


y5388l_crop_email.jpg


A Walker single wall, food grade, corrosion-resistant T316 stainless steel vertical mixing tank with open top, dish bottom, with Lightnin Mixer prop agitation for liquid sugars, juices, water, oils and/or other free-flowing liquid products.


FEATURES:

  • y5389r_crop_email.jpg13.75 inch diameter by 25.5 inch straight sided vessel with dish bottom.

  • 1 inch diameter side bottom outlet with Tri-clamp connection, and discharge valve.

  • Open top with two-piece lift-off removable half-moon shaped covers.

  • 43 inch high infeed, 15 inch discharge height.

  • y5389q_crop_email.jpgClamp-on LIGHTNIN model XSS5P50A mixer:

    • Three (3) blade propeller agitator.

    • 5/8 inch by 29 inch long shaft.

    • Pneumatic powered mixer - compressed air required.

  • Food grade, 316T stainless steel tank.

  • Stainless steel legs with heavy duty 9.5 inch diameter casters for ease of mobility.


As of this writing, this food grade 316 stainless steel 10 gallon mixing tank is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5389

10 gallon MIX TANK with pneumatic mixer, Y5388

10 gallon VERTICAL TANK
with Lightnin pneumatic mixer, single wall, food grade stainless steel.

y5388l_crop_email.jpg

A Walker single wall food grade stainless steel vertical mixing tank with Lightnin pneumatic prop agitator - mixer for liquid sugars, juices, water, oils and/or other free-flowing liquid products.


FEATURES:

  • y5388s_crop_email.jpg14 inch diameter by 25.5 inch straight sided vessel with dish bottom.

  • 1 inch diameter side bottom outlet with Tri-clamp connection, with discharge valve.

  • Open top with two-piece lift-off removable half-moon shaped covers.

  • 41.75 inch high infeed, 13.5 inch discharge height.

  • y5388r_crop_email.jpgClamp-on LIGHTNIN model XJA-33 pneumatic mixer:

    • Three (3) blade propeller agitator.

    • 5/8 inch by 29 inch long shaft.

    • Pneumatic powered mixer - compressed air required.

  • All food grade sanitary stainless steel construction.

  • Heavy duty 8 inch diameter casters for ease of mobility.


As of this writing, this food grade stainless steel 10 gallon mixing tank is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5388

316L stainless steel MIX TANK with pneumatic agitator, 65 gal, Y5386

65 gallon VERTICAL TANK
with Lightnin mixer, single wall,
food grade, 316L stainless steel.

y5386o_crop_email.jpg


A Walker single wall, food grade, corrosion resistant 316L (low carbon) stainless steel vertical mixing tank, with Lightnin prop agitator - mixer for liquid sugars, juices, water, oils and/or other free-flowing liquid products.

FEATURES:

  • y5386s_crop_email.jpg28 inch diameter by 29 inch straight sided vessel with dish bottom.

  • 1 inch diameter side bottom outlet with Tri-clamp connection, with discharge valve.

  • Open top with two-piece lift-off removable half-moon shaped covers.

  • 40.5 inch high infeed, 9 inch discharge height.

  • Clamp-on LIGHTNIN XSS5P50A pneumatic mixer:

    • Three (3) blade propeller.

    • 3/4 inch by 35 inch long shaft.

    • y5386q_crop_email.jpgPneumatic powered agitator - compressed air required.

  • All food grade sanitary stainless steel construction.

  • Heavy duty 9.5 inch diameter casters for ease of mobility.


As of this writing, this food grade 316L stainless steel 65 gallon mixing tank is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5386

65 gallon MIX TANK, food grade with agitator, Y5384

65 gallon VERTICAL TANK with Lightnin mixer,
single wall, food grade stainless steel.

y5384p_crop_email.jpg


A Walker single wall food grade stainless steel vertical mixing tank, with Lightnin prop mixer for liquid sugars, juices, water, oils and/or other free-flowing liquid products.


FEATURES:

  • 27.75 inch diameter by 27.5 inch straight sided vessel with dish bottom.

  • y5384za_crop_email.jpg1 inch diameter side bottom outlet with Tri-clamp connection, with valve.

  • Open top with lift-of removable two-piece half-moon shaped covers.

  • 43 inch high infeed, 12.5 inch discharge height.

  • y5384t_crop_email.jpgClamp-on LIGHTNIN XWSS5P50A Mixer:

    • Three (3) blade propeller.

    • 3/4 inch by 35 inch long shaft.

    • Pneumatic powered - compressed air required.

  • All food grade sanitary stainless steel construction.

  • Heavy duty 7.5 inch diameter casters for ease of mobility.


As of this writing, this food grade stainless steel 65 gallon mixing tank is in stock at ALARD, in EXCELLENT condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5384

Urschel model G-A DICER, Y5490

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter.

y5490c_crop_email.jpg


The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions...

  • y5490j_crop_email.jpgSlice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.

  • Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches (76mm) - change part.

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • ALARD can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement.


This cutting machine FEATURES...

  • y5490_crop_email.jpgStainless steel slice shell and impeller with 10 inch diameter slice shell opening.

  • Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.

  • Stainless steel factory control box with safety interlock system.

  • 2 HP stainless steel shrouded motor.

  • 460 volt 3 phase electrical input.


As of this writing, this reconditioned Urschel dicer is in stock, in GOOD operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial volume food cutting machine / equipment needs.

ALARD item reference #: Y5490

About this Archive

This page is an archive of entries from October 2023 listed from newest to oldest.

September 2023 is the previous archive.

November 2023 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)