SINGLE-STATION NETWEIGH BAG FILLING TABLE,
with wash-down scale, and adjustable height pneumatic bag-holder, all food grade stainless steel...

Y0500 Alard single-station BAG FILLER
with Z4387 Packrite 6000 BAG SEALER,
VIDEO DEMO from Alard Equipment Corporation.

A food grade sanitary stainless steel BAG PACKING TABLE / hand-pack bag filler for fresh-cut / pre-cut produce packaging, with a remote readout scale, and adjustable height pneumatic bag-holder.

OPERATION:

• The operator hangs the bag on the bag-filling funnel and engages the bag holder by pressing a button.
  
  
• The operator then pulls product by hand, from the table into the filling tube, until the proper weight is made, as indicated by the eye-level over/under scale. A little product easily be remove if needed to "make weight".
  
  
• The operator then disengages the bag holder and removes the bag, puts a new bag in place, and the process is repeated.
  
  

FEATURES:

• The stainless steel bag-filler / pack table is 40.5 inches long by 34.5 inches wide inner/working dimensions, and has sides that taper from 14 inches high at the back, and angles down to 6 inches high at the front.
  
  
• 30 pound capacity Cardinal wash-down over-under scale, with remote readout mounted at eye level. Other model scales / capacity are/is available to customer specification; CALL 315-589-4511 to confirm availability to discuss your particular fruit and/or vegetable netweigh bag filler specifications.
  
  
• 6.25 inch diameter front center filling tube. (Can be supplied with filling tube inserts for smaller size bags).
  
  
• Stainless steel pneumatic bag holder with push-button operator control for holding bag on the filling tube.
  
  
• Beneath the bag holder is a 10inch square stainless steel weigh cell platform which is adjustable to accommodate different bag heights.
  
  
• 40 inch working height at front lip, on threaded rod adjustable feet with foot-pads.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 110 volt single phase electrical input (standard household current) for the scales, and requires compressed air for the bag holders.
  
  

In-stock NEW!

As of this writing, this NEW, fully assembled, ready to go hand-pack bag filler table is in stock at Alard, fully assembled with scale and bag-holder, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm present availability, and to discuss your particular pre-cut produce / fresh produce packaging equipment needs.

Alard item reference #:Y4176

2,500 lb Mepaco RIBBON MIXER-BLENDER VIDEO DEMO

y3719_mepaco_vacuum_mixer-blender_2500lb
from Alard Equipment Corporation.

INDUSTRIAL VACUUM MIXER-BLENDER, twin ribbon, 2,500 lb capacity, USDA food grade sanitary all stainless steel...

A 50 cubic foot vacuum ribbon blender with end bottom discharge doors for mixing / blending solids. This heavy duty stainless steel ribbon mixer-blender is configured for vacuum mixing so as to prevent product oxidation to maintain the quality and color of sensitive food products such as meats; as well as to assist in the absorption of salt, spices, and/or marinates in the blending process.

VACUUM BLENDER FEATURES:

• 2,500 pound capacity / 50 cuibic foot horizontal batch mixer with a double-u shaped bottom.
  
  
• Mixing vessel measures 6 feet long by 45 inches wide by 32 inches deep.
  
  
• Food grade stainless steel construction with heavy duty 0.5 inch thick side walls.
  
  
• The agitators have 2 inch wide by 3/8 inch thick ribbons mounted on 3 inch shafts with 3/4 inch spokes.
  
  
• Gasketed / sealed heavy stainless steel lid with dual pneumatic cylinder power lift.
  
  
• Dual 13.5 inch wide by 7.5 inch high opening bottom end discharges with gasketed "spade shaped" pneumatic discharge doors.
  
  
• Independent pneumatic cylinders control left discharge, right discharge & lid lift.
  
  
• Lid and doors are gasketed / sealed and this blending machine was otherwise designed and built for blending under vacuum, (vacuum pump not included).
  
  
• 64 inch infeed height, 32 inch discharge height, on stainless steel legs.
  
  
• Each of the agitator shafts is powered by a 7.5 HP 3 phase drive.

As of this writing, this reconditioned twin shaft vacuum ribbon blender is in stock at ALARD, with two two new drives, in excellent operational, mechanical, electrical, pneumatic, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for current availability, and to discuss your particular industrial food process mixing and blending needs.

ALARD item reference #: Y3719

Safeline FOOD METAL DETECTOR with BELT CONVEYOR,
vertical opening orientation, 10x7,
all food grade stainless steel.

Safeline METAL DETECTOR video demo,
Vertical opening, 10x6.5, with
conveyor belt, Alard item Y4185.

A refurbished Safeline PowerPhase Plus stainless steel metal detector for food product metal detection, and other industrial packaging line applications, complete with integrated belt transfer stainless steel thru-conveyor with belt-stop alarm reject...

FEATURING:

• 10 inch high by 6.75 inch wide USABLE opening dimensions with the conveyor belt in place.
  
  
• VERTICAL aperture opening orientation for standing containers, bottles, jars, cups, tubs, cartons, stand-up pouches or gusseted bottom bags.
  
  
• Stainless steel search head with integral digital touch pad controls.
  
  
• Mounted on a stainless steel transfer thru conveyor frame with 6 inch wide by 48 inch long food grade rubberized belt at a 33.5 inch working height on threaded rod adjustable feet.
  
  
• Right to left product flow direction from the perspective of the operator control position.
  
  
• Belt stop alarm reject.
  
  
• Food grade sanitary stainless steel, including control box.
  
  
• ½ HP drive geared for 45 feet per minute belt speed.
  
  
• 110 volt single phase (standard household current) electrical input.

As of this writing, this refurbished Safeline conveyorized metal detection system is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for availability and to further discuss your food safety inspection equipment needs.

ALARD item reference #: Y4185

SPLIT NUT "BLANCHER",
Cantrell Model 341B,
peanut cleaner, separator....

A CANTRELL Model 341-B Peanut "Blancher", for splitting peanuts, separating and saving peanut hearts, and cleaning peanuts of skins & trash; from dried or fully roasted peanuts. Manufacturer recommends for yielding the smoothest, cleanest nuts possible for peanut butter, candy and similar products with maximum efficiency...

FEATURING:

• Peanut grader / cleaner / separator - Separates and saves split peanuts and hearts, discharging them separated from each other; while removing skins, ferrous tramp metals, and trash.
  
  

• Manufacturer rated for up to 2,000 pounds / 1 ton per hour capacity.
  
  
• FDA approved rubber blanching elements remove skins without excessive rubbing or brushing.
  
  
• 6 inch diameter stainless steel infeed at 65 inches high with rotary magnetic separator to protect blanching elements and finished product from damage caused by foreign ferrous material.
  
  
• 1.5HP adjustable blanching belt control ensures effective blanching of all nut sizes.
  
  
• Fractional HP air cleaner fan (removes skins and light trash).
  
  
• Manually adjustable primary and secondary separation valves.
  
  
• 14 inch wide by 48 inch long solid, stainless steel vibrator shaker tray for hearts separation and fines removal.
  
  
• All steel support frame and shrouding.
  
  
• 230/460 volt 3 phase electrical input.

As of this writing, this nut blancher is in stock at ALARD, in excellent operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your nut processing needs.

ALARD item reference #: Y4152

Vanmark HYDROLIFT DESTONER,
16 inch diameter, stainless steel...

The Vanmark Hydrolift Series 2000 VERTICAL DESTONER continuously rinses and removes debris and rocks from root crop vegetables including potatoes, carrots, sweet potatoes, yams, beets, onions, as well as other fruit and vegetable products; while elevating it to the next step in your process.

OPERATION:

The vertical auger creates water turbulence that separates stones and debris from product, removes rock, washes loose dirt away, and acts as a hopper-feeder lifting the product to the discharge point. Separated rock, dirt and debris settle at the bottom of the tank. The Hydrolift also provides your product with a water-rinsing soak bath, where the use of anti-oxidants in the solution can help prevent discoloration and provide a final washing to improve the quality of your finished product.

FEATURES:

• 24 inch long by 48 inch wide by 26 inch deep stainless steel wet hopper infeed, with water inlet and overflow connections.
  
  
• 16-inch diameter stainless steel vertical screw gently lifts products from the water, with tens of tons-per-hour high capacity.
  
  
• 7 foot 9 inch (93 inch) product discharge height from flanged discharge outlet, on stainless steel legs; --feet must be bolted to the floor for safety / stability.
  
  
• A 4 foot long bolt-on / bolt-off discharge chute comes with it to lowerate product down to a slightly lower discharge height if desired.
  
  
• Flanged / bolted-on discharge can be reoriented for straight-line, right-angle, left-angle or reverse discharge direction positions. Discharge is presently oriented in an inline / straight-line position (see pictures).
  
  
• Combination all-in-one destoner / vertical elevator / dip tank configuration provides triple-utility in a small footprint for maximum plant floor-space utilization.
  
  
• Manufacturer rates for up to 25,000 lbs per hour product throughput.
  
  
• 12 inch by 17 inch bottom access plate, with water drain port, for cleanout.
  
  
• Food grade all stainless steel construction.
  
  
• 2HP 3-phase drive.

As of this writing, this stainless steel Hydrolift continuous inline screw auger destoner is in stock at Alard, in good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process vegetable washing equipment needs.

Alard item reference #: Y4086

Key Iso-Flo VIBRATING FEEDER,
vibratory shaker-feeder, food grade, all stainless steel...

A Key Iso-Flo vibratory conveyor for even-feeding to downstream equipment, such as a radial combination scale, cutting machine, filling machine, peeling machine, or whatever food processing or packaging equipment.

FEATURING:

• Vibrating conveyor bed measuring 76.5 inch overall length by 18 inch wide.
  
  
• Dimpled / rigidized stick-resistant stainless steel contact surfaces.
  
  
• 5.5 inch high sidewalls.
  
  
• 9.75 inch diameter bottom end discharge with 4 inch long discharge chute.
  
  
• Flexible mounting options: Can be equipped with legs for floor mounting, or suspended from above e.g. ceiling mounted to feed a scale, depending on your particular producting line configuration - CALL 315-589-4511 to discuss your particular bulk food product conveyor and feeding requirement.
  
  
• All food grade sanitary stainless steel construction, including support frame.
  
  
• (4) mounting springs (not shown in pictures) included.
  
  
• New style Key Iso-Flo eccentric drive with 1HP 208/230/460 volt 3 phase washdown motor.

As of this writing, this vibrating shaker-feeder is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, and cosmetic condition; available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process bulk food conveying and feeding need.

ALARD item reference #: Y4180