A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

Urschel OV with power hold-down, Y4191

URSCHEL Model OV cross-cut transverse SLICER,

for elongated food products,
with powered top hold-down belt.


Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.


  • Cutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thicknesses slices from 1/16 (1.6mm) of an inch up to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.

  • Rated for products no more than 2.75 inches (70mm) in diameter or width.

  • Flat or krinkle cut blades and shear edges are available for corrugated or flat slices.

  • One slice is made at a time, which prevents crushing or distortion of the product.

  • An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.

  • The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.


  • Power top hold-down belt provides positive product stabilization for straight and true vertical slices. Urschel specifies the narrow-belt hold-down for uniform diameter products from 3/4 inch (19 mm) to 1 1/2 inch (38.1 mm) in diameter.

  • 24 inch long by 15 inch wide stainless steel infeed hopper.

  • V-trough belt aligns and centers products for uniform cross cut slicing.

  • Spiral discharge chute gently decelerates the cut slices.

  • Food grade USDA sanitary stainless steel construction including frame.

  • Factory control panel with safety interlock system. 2 HP 208/230 volt 3 phase brakemotor drive.

As of this writing, this Urschel model OV slicing machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit and vegetable slicing specification.

Alard item reference: Y4191

JOIN our

Email list!
Email PRIVACY explanation link!

6483 Lake Avenue
Williamson, NY  14589
315-589-3871 (fax)

About this Entry

This page contains a single entry by Michael C. Shults, Alard Equipment Corp published on June 17, 2019 12:30 PM.

FAS SPRINT pre-made bag & stand-up pouch filler-sealer, Y4016 was the previous entry in this blog.

Whallon PD90 DEPALLETIZER, Y4161 is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.