A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

October 2018 Archives

STATIONARY WATER SCREEN, hydrasieve, food grade stainless, Y3675

Lyco HYDRASIVE STATIC SCREEN
for solids-liquid separation, food grade, stainless steel...

y3675a_crop_email.jpg


A Lyco STATIONARY SCREEN hydrasieve liquid solid separator screen, for recapturing product such as peas, beans, corn, diced or chopped vegetables from washing, chilling, or rinsing flume water, or can perform rough screening of process water to remove meat waste, stems, seeds, peels, pods, sticks, leaves, and other food wastes in water recovery for reuse, and/or to reduce municipal costs and fines from BOD, TSS, and TKN in your plant waste water.

FEATURES:

  • Water sifting screen measures 24 inches wide by 30 inches long.

  • Curved, "SWAY" type screen with .125 inch sieve openings.

  • Dispersion flap to distribute water over the entire width of the screen.

  • Side ports for cleanout access behind screen.

  • 4 inch side and 2 inch bottom sanitary inlet connections.

  • 2 inch side threaded and 4 inch bottom flanged collection tank discharge connections.

  • All food grade sanitary stainless steel construction.


As of this writing, this Lyco Hydrosieve screen is in stock at ALARD, in GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your waste water handling needs.

Alard Item Reference #: Y3675

ACCUMULATING DISK, 4 foot diameter, stainless steel, Y3488


ACCUMULATION / PACK-OFF DISC TURN-TABLE,
48 inch diameter stainless steel
disc accumulating table,
with drive and control box.

y3488_crop_email.jpg


FEATURES:

  • 4 inch high solid side rails, for 360 degree enclosure of the accumulator disc.

  • 35 inch working height on tubular stainless steel frame, with threaded rod adjustable foot pads.

  • y3488d_crop_email.jpgUnderside turntable casters for disc support of heavy product loads.

  • Food grade sanitary stainless steel construction.

  • Stainless steel electrical control box with ON/OFF and variable speed drive controller.

  • 230 volt 3 phase 1 HP gear motor drive.


As of this writing, this 48 inch disc accumulation table is in stock at ALARD, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food handling needs.

Alard Item Reference #: Y3488

Bridge SCA SPREADING CONVEYOR, reciprocating shuttle feed belt Y3695

PULL-BACK CONVEYOR, RECIPROCATOR /
SHUTTLE CONVEYOR, Bridge SCA...

y3695a_crop_email.jpg

Frequently used as an oven or freezer feed belt, the Bridge Model SCA 18/42 spreading conveyor will transfer / load meats, pastas, and other uniformly-shaped food products by distributing them across another perpindicularly oriented belt, so as to gain denser belt loading. Useful for feeding breader-batterer machines, belt freezers, cooker belts, tray loading, and other applications where close product placement is more efficient and desirable.


Efficiency is maximized by the high speed reciprocating action of the Bridge SCA feeder belt, which by a short, gentle product drop, loads belts or trays with product closely and completely. Freezers, ovens, cookers or other processing equipment will operate more economically and efficiently, with maximum product density and belt coverage. The high speed shuttle conveyor model SCA is manufacturer recommended to handle a wide variety of products, from patties and meatballs to ravioli.


FEATURES:

  • 18 inch wide by 9 feet extended belt length with plastic interlocking belt.

  • y3695b_crop_email.jpgBelt pullback / reciprocation adjustable up to 18 inches of travel.

  • Pneumatic powered continuous shuttling belt pull back action.

  • 52 inch working height on tubular stainless steel frame with 4 inch casters; with threaded rod stabilization posts.

  • Lube cluster.

  • Food grade, USDA sanitary stainless steel construction.

  • Factory original stainless steel electrical box with VFD variable speed belt drive controller, pneumatic controls, and start / stop, stop, and lockout controls. Safety stop buttons on both sides of machine.

  • 460 volt 3 phase electrical input, compressed air also required.


As of this writing, this reciprocating product distribution conveyor is in stock at ALARD, in VERY GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food handling needs.

ALARD item reference #: Y3695

Ross Series 100 batch HIGH-SHEAR MIXER, Y3051

HIGH SHEER BATCH MIXER,
food grade stainless steel,
on portable stand, 5HP...

y3051d_crop_email.jpg

A Ross Industrial Mixers Series 100 batch high shear mixer, by Charles Ross & Sons Company. This Ross Model ME-105 high-shear production mixer consists of a single four-blade rotor that turns at high speed within a stationary stator. This rotor-stator mixer is manufacturer recommended for applications that require fast particle size and/or droplet reduction, such as homogenization, solids size reduction, and emulsification


OPERATION:

As the rotating blades pass each opening in the stator, they mechanically shear particles & droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. As quickly as material is expelled, more is drawn into the bottom of the rotor/stator generator, which promotes continuous flow & fast mixing...


FEATURES:

  • 31 inch long agitator shaft, surrounded by four stabilizer shafts which hold the high-shear stator housing.

  • 3.5 inch diameter four (4) blade main rotor.

  • y3051j_crop_email.jpgSix (6) slot stator housing with 1.75 inch by 0.75 inch openings backed by 1mm perforated screen.

  • Height adjustable 3 inch diameter six (6) blade auxillary prop located on shaft above the main rotor.

  • Powered by 5 HP 3480 RPM motor.

  • Food grade stainless steel construction wetted parts / product contacts.

  • 208/230/460 volt 3 phase electrical input.

  • Mounted on a painted mild steel manual hydraulic jack lift hoist with 4 inch casters, offering the flexibility to use a single mixer in multiple vessels, and allows user to vary the position of stator to process different materials & batch sizes.


As of this writing, this high shear mixer is in stock at ALARD, in EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process high shear mixer need.

ALARD item reference #: Y3051

Doboy band BAG SEALER, stainless steel, Y3876

CONTINUOUS BAND BAG SEALER,
sanitary, stainless steel, Doboy B-450M.


y3876a_crop_email.jpg

A Doboy Model B-450M food and medical grade sanitary continuous band bag sealer manufacturer designed to meet the medical packaging industry validation requirements for sanitary and sterile applications. Manufacturer rated for sealing bags and pouches with a secure hermetic seal using a variety of materials, including polyethylene, foils, paper/polyeter and Tyvec / Mylar films.



FEATURING:

  • Left to Right product flow.

  • y3876g_crop_email.jpg5.5 inch long air-pressure-adjustable air-cooled sealing bars.

  • Front & back seal-bar digital temperature adjustment to 450 degrees Fahrenheit.

  • Teflon carrier band.

  • Variable speed control for 300-500 inches per minute.

  • Food grade sanitary / medical grade sanitary stainless steel enclosure and operator panel.

  • Up to 38 inch working height, hand crank adjustable, painted steel stand.

  • 110 volt single phase (standard household current) electrical input.


As of this writing, this Doboy Band Sealer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical, pneumatic and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food packaging needs.

ALARD Item Reference #: Y3876

Safeline METAL DETECTOR, drop-thru, Y3928

Safeline GRAVITY FLOW METAL DETECTOR,
5 inch diameter opening,
with horn reject notification,
food grade stainless steel...


y3928l_crop_email.jpg


A Safeline Model V5/SS/6F gravity fall / drop-through metal detector for industrial manufacturing and packaging applications...


FEATURING:

  • 5 inch inside diameter by 6.4 inch long aperture.

  • y3928r_crop_email.jpgDigital control box and remote control box.

  • All food grade stainless steel.

  • Currently mounted on (available with or without) a stainless steel stand.
    • 50.5 inch high infeed.
    • 44 inch high discharge.
    • 110 volt single phase (standard household current) electrical input.


Gravity free-fall metal detection systems are commonly used for free-flowing granular and/or particulate products, as well as sliced, diced, shredded & whole products in food manufacturing and other industrial production applications. Gravity flow metal detectors are commonly mounted under feed hoppers, or under mixer / blender discharges, or between scales and form-fill-seal or other types of baggers.

As of this writing, this Safeline gravity fall metal detector is in stock at ALARD, in GOOD operational, electrical and mechanical condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food safety needs.

ALARD item reference #: Y3928

TOMATO SLICER / TRAY FILLER, Y2618

TOMATO SLICER, TRAY FILLER,
Bock Precise Slice cutting machine
with tray feeding / indexing conveyor...


y2618c_crop_email.jpg

A Bock Precise-Slice semiautomatic tomato / fruit / vegetable slicer and tray filling machine, manufacturer designed for fresh-cut tomato slicing, but also applicable to cut other soft-fleshed fruits & vegetables. Complete with indexing through-conveyor such that freshly cut slices drop a short distance into plastic trays.


FEATURING:

  • Two-station hand-feed: Each side of the machine has a UHMW plastic manual feed plate where fruits / vegetables are hand placed into the feed slots. Each feed plate has five (5) 2-inch wide by 7.5-inch long oblong feed slot openings for safely feeding product to the knife blades. Can be set to operate "one-sided" if only one operator is available.

  • Slicing consists of five (5) oscillating serrated blade sets, each set with eight (8) blades to yield 1/4 slices. The blades are staggered at two levels for gentle cutting, to help assure clean cuts, reduce resistance, and avoid "squashing".

  • Loaded plates are manually pushed into the safety-shrouded cutting chamber where vertical pneumatic plungers press product down thru the oscillating blades. One side is loading while the other side is cutting.

  • 9 inch wide by 66 inch long dual band underside thru-conveyor with denester for trays.

  • Set / last used for 11.75 inch long by 8.75 inch wide by 2.75 inch deep plastic trays.

  • Food grade sanitary stainless steel construction.

  • Electrical control box with safety interlock system.

  • 230/460 volt 3 phase electrical input, also requires compressed air for pneumatic components.

As of this writing this fruit cutter slicer tray filler is in stock at ALARD, in GOOD operational and mechanical condition, available for timely shipment.


CALL 315-589-4511 to confirm availability and discuss your food pre-cut produce processing needs.

ALARD item reference #: Y2618

Goodnature grinder feeder for juice press, Y4051

y4050e_crop_email.jpgGoodnature GRINDER-FEEDER
for fruit and vegetable juice production...

A Goodnature Products Model PF180 pre-press fruit grinder and pomace feed system, to chop fruit and/or vegetables prior to juice pressing with damage-free transport of slurry from the grinder to the press for commercial juice production in the context of an industrial capacity juice line.

This hammer-mill with pump will grind and feed pomace to a Goodnature or other juice press (press not included, but we have them; --CALL 315-589-4511 to discuss your industrial fruit and vegetable juice production equipment needs).

FEATURES:

  • y4050r_crop_email.jpg

    HAMMERMILL / GRINDER:
    • Fresh fruit feed hopper measures 34 inches square 21.5 inches deep at the open infeed side.
    • The grinding chamber is hinged with a manual latch and safety switch.
    • Fourteen (14) fixed hammers with flat/solid cross members.
    • Food grade stainless steel construction.
    • The mill is powered by a 7.5 HP belt drive motor.
    • Set up on a tubular stainless steel frame for 79 inch infeed height and discharge height to drop into the feeder...

  • y4050m_crop_email.jpgHOPPER-SCREW-FEEDER with POMACE FEED PUMP
    • Ground product drops into a tapered 30 inch by 40 inch by 32 inch deep catch-hopper.
    • A 3.5 inch diameter screw auger in the bottom of the hopper feeds the pump.
    • Food grade USDA sanitary stainless steel Moyno PUMP Model FBC, 3.5 inch diameter screw pump with a flanged 5 inch by 9 inch infeed throat.
    • Screw / auger / pump drive is 5 HP 230/460 volt 3 phase with Nord gear reducer (4.22:1 ratio) and 415 RPM pump operating speed.

  • Fruit and vegetable GRINDER-FEEDER SYSTEM includes:
    • PVC electrical control box with variable speed controller, 230 volt 3 phase electrical input.
    • All food grade stainless steel construction.

  • NOTE:
    • Did not come with a grinder screen - Output particulate size is determined by screen openings; a wide range of screens are available from the manufacturer.


As of this writing, this grinder-feeder for juice pomace is in stock at ALARD, in VERY good mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4050

Vegetable topper-tailer INCREMENT CUTTER, Y3895

VEGETABLE TOPPER-TAILER,
increment cutter, length slicer,
for lettuce, celery, carrots...

y3895k_crop_email.jpg

A high capacity industrial scale top and tail cutting machine for pre-cut produce / fresh-cut vegetable processing and packaging operations. Last used as a ROMAINE LETTUCE TRIMMER: This dual / two-lane elongated vegetable trimming machine could work for cutting the top and tail ends off similar products e.g. as a celery stalk trimmer, carrot trimmer, to top and tail similar long lettuces such as frisee, escarole, and cos, or to length slice bunches of other leafy green vegetables.



FEATURES:

  • Two (2) individual cutting lanes allow simultaneous feeding from each side.
    • Each top and tail trimming lane is outfitted with a 6 inch wide by 10 foot long cleated plastic transfer belt with 2 inch high flights on 5 3/8 inch centers.

  • y3895s_crop_email.jpgEach transfer belt carries the product between (2) 20 inch diameter disc blades, which are adjustable from a 7 inch to 9 inch length cut.

  • Food grade stainless steel machine, with steel cutting disc knives.

  • The cutting area and blades are fully safety shrouded with stainless steel guards.

  • Center mounted operator start/stop switch.

  • 36 inch infeed height.

  • 50 inch discharge height.

  • All food grade stainless steel construction.

  • 230/460 volt 3 phase electrical input.

As of this writing, this industrial capacity long vegetable top and tail cutter is in stock at ALARD, in very good condition, available for immediate shipment.

ALARD item reference #: Y3895

Heinzen SD-50-LT Spin Dryer DEMO VIDEO, Alard item Y4078

VIDEO DEMO - HEINZEN / HMI Model SD50LT SPIN DRYER...

Heinzen SD-50 SPIN DRYER video demo
from Alard Equipment Corporation.


A compact food grade centrifugal dryer, with Heinzen heavy-duty industrial-quality construction for fresh produce processing plants and other similar large institutional and industrial food processing applications. Uses light plastic baskets which can be inserted and removed by hand. Ideal for dewatering fresh-cut vegetable products after washing, in the context of industrial produce packing and fresh-cut processing operations producing bagged salads, packaged fruit, shredded lettuce, chopped greens and other leafy or shredded vegetable products.

As of this writing, this Heinzen SD-50 salad spinner is in stock in at Alard, in LIKE NEW operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your precut produce packing equipment needs.

Alard item reference #:Y4078

Refurbished M-Tek VACUUM BAG SEALER, 28 inch, Y3973

M-TEK CORR-VAC VACUUM GAS-FLUSH BAG SEALER,
28 inch seal bar...

y3973za_crop_email.jpg


A refurbished M-Tek Corr-Vac Mark I vacuum gas-flush bag sealing machine with a jaw-type 28-inch wide sealing bar for M.A.P. (modified atmosphere packaging) sealing of bags, designed specifically with gentle low vacuum for delicate fresh produce packing applications such as spring mix, bagged salads, etc...



FEATURES:

  • y3973ze_crop_email.jpg28 inch wide seal bar with two (2) 2 inch wide snorkels on 9.25 inch centers.

  • Bag length-adjustable 8 inch wide by 42 inch long bag support shelf.

  • 10 cfm Gast vane type vacuum pump.

  • Embossing code holders.

  • Frame mount adjustable working height.

  • Food grade stainless steel construction.

  • Vacuum and gas-flush capability, extends shelf life, preserves color of pre-cut produce, asphyxiates insects and larva in organic products.

  • 208/230 volt 3 phase electrical input.


As of this writing, this reconditioned M-Tek bag sealer is in stock at ALARD, in EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your food packaging needs.

ALARD item reference #: Y3973

Heinzen SD50LT SPIN DRYER with plastic baskets, Y4078

HEINZEN / HMI Model SD50LT
SPIN DRYER,
with PLASTIC BASKETs...

y4078n_crop_email.jpg

A compact food grade centrifugal dryer, with Heinzen heavy-duty industrial-quality construction for fresh produce processing plants and other similar large institutional and industrial food processing applications. Uses light plastic baskets which can be inserted and removed by hand. Ideal for dewatering fresh-cut vegetable products after washing, in the context of industrial produce packing and fresh-cut processing operations producing bagged salads, packaged fruit, shredded lettuce, chopped greens and other leafy or shredded vegetable products.


FEATURES:

  • Uses a hand-removable plastic basket, 32 gallon capacity, perforated, 20 inches top diameter by 27 inches deep. This light plastic dryer basket can be placed, removed and dumped by hand without aid of an overhead hoist or other apparatus. This basket size also fits easily under cutting machines, dewatering shakers,and other upstream sources. Because it uses a modified Rubbermaid Brute basket, it is particularly economical to purchase multiple baskets to fit your operational capacity.Angled body orientation allows for easier loading and unloading.

    • TWO (2) plastic dryer baskets included.

  • y4078t_crop_email.jpgHeavy stainless steel basket holder with basket-bottom gripper mechanism.

  • Manufacturer rated for up to 50 lb weigh load capacity, and up to 1000lbs per hour throughput capacity.

  • All food grade sanitary stainless steel construction.

  • Integral operator control box with programmable speed, time and dynamic braking.

  • Includes interlock safety system with an OSHA compliant safety sensor on the spring-loaded hinged cover (cuts power if opened).

  • 1.5 HP stainless steel shrouded wash down drive motor.


As of this writing, this Heinzen SD-50 salad spinner is in stock in at Alard, in LIKE NEW operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your precut produce packing equipment needs.

Alard item reference #:Y4078

Refurbished Urschel J9-A DICER, Y3974

URSCHEL MODEL J9-A DICER / STRIP CUTTER

y3974zb_crop_email.jpg

A reconditioned Urschel J9-A two-dimensional belt-fed cutter, manufacturer rated for firm products up to 1/2 inch thick, with included feed roll, or thicker if product is compressible. This dicing machine / strip-cutter, chopping machine produces a variety of dices and strips. Manufacturer literature recommends for meats (frozen tempered chicken breast, beef jerky, bacon strips, sausage crumbles), baked goods (pita chips, flour tortilla strips. bread dices for croutons, brownies) & vegetables such as peppers, celery, broccoli, and parsley; and as a high-capacity greens chopper for mustard greens, collard greens, kale, and spinach.



y3974zk_crop_email.jpgThe Urschel J9A is a high-capacity tons-per-hour cutting machine designed for very clean, precise cuts, in uninterrupted continuous operation in industrial food processing applications; including USDA meat and poultry applications, with easy cleanup and maintenance,

This machine FEATURES:

  • 9 inch wide product in-feed belt.

  • Currently complete except for cutting parts to be prepared and installed per buyer requirement: CALL 315-589-4511 to discuss your cutting specifications!

    • Circular knives can be configured from cuts for 3/16 inch to 2 inches (4.8mm to 50.8mm).

    • Crosscut spindles are available for cuts from 1/16 inch to 3 inches.

  • Food grade USDA sanitary steel construction; including frame, guards, shrouds & cutting spindles.

  • Complete with factory electrical panel with operator controls & safety interlock system.

  • 5 HP 208/230/460 volt 3 phase brake-motor drive.

As of this writing this Urschel cube cutter / strip cutter is in stock at ALARD, in EXCELLENT operational, mechanical, and electrical condition, needing only change parts per your specification installed prior to shipment.


CALL 315-589-4511 to confirm availability and to discuss your particular industrial food process cutting machine need.

ALARD item reference #: Y3974

WEIGH-FILLER-SEALER for preformed stand-up BAGS; Y3910.

NET-WEIGH FILLER-SEALER
for premade gusset-bottom stand-up bags,
food grade, stainless steel, automatic...

y3910w_crop_email.jpg

A 2-LANE LINEAR SCALE bulk-and-dribble weigh filling head coupled with an AUTOMATIC BAG SEALER for preformed bags, with resealable zipper applicator, food grade stainless steel, and capable of handling a range of bag types from plain bags, to stand-up gusset bottom bags. This combination scale and bagger is engineered for quick set up, easy operation, reliability & speed on a wide assortment of typical food packaging applications...

This automatic bag filling and sealing system CONSISTS OF:

  • Ohlson Model 2M2-SS dual lane linear scale...
    • Weight range of 1 oz to 5 lb.
    • Accuracy of .5 to 1 gram per manufacturer.
    • Rated up to 30 weighs per minute.
    • All food grade sanitary stainless steel construction.
    • Non-stick rigidized / dimpled stick-resistant stainless steel product contact surfaces, including top hopper and discharge chute.
    • 79 inch high infeed height on adjustable foot pads.
    • Stainless steel infeed hopper measures 16 inch by 39 inch by 10 inch deep.
    • Two stage bulk and dribble vibratory pans.
    • Weigh-cell buckets measure 9 inch by 8 inch by 8.5 inch deep.
    • Two-lane machine with tubular stainless steel frame wide enough for a third lane.
    • Touchpad interface control panel, with PLC, 100 product presets.
    • 1 cfm @ 60 psi max air requirement.
    • 110 volt single phase (standard household current) electrical input.



  • y3910y_crop_email.jpgAutomatic Packaging Systems Autobag Model AB 180-SS automatic bagger / vertical pouch sealer...
    • Manufacturer rated for up to 80 bags or pouches per minute.
    • Accomodates a range of polyehtylene bag-on-a-roll sizes:
      • 2 - 11 inch wide
      • 3 - 22 inch long
      • 1.0 - 5.0 mil
    • Changeover can be achieved in less than 2 minutes.
    • Equipped with automatic bag threading.
    • Simple mechanical height adjustment for added operator comfort.
    • 10 inch touchscreen operator control allows quick recall & job set-up from the high capacity memory storage and diagnostic help screens assist in problem solving.
    • Food grade stainless steel product contact surfaces.
    • 5 cfm @ 80 psi air requirement.
    • 110 volt /220 volt single phase (standard household current) electrical input.


As of this writing, this food grade automatic bag filling and sealing system for stand-up bags is in stock at ALARD, in VERY good condition, available for timely shipment.


CALL 315-589-4511 for availability and to further discuss your food packaging needs.

ALARD item reference #: Y3910

PIPE-LINE METAL DETECTOR 4 inch opening, 3 inch tube, Y2621

PIPELINE METAL DETECTOR,
4 inch opening, 3 inch tube, food grade,
all stainless steel...

y2621f_crop_email.jpg

A refurbished stainless steel Goring Kerr DSP2 inline metal detector for pumped food products including sauces, pastes, slurries, creams, oilse, purees, salsa, refried beans, and other fiscous or liquid food products hot or coold. Also useful for for vacuum packed product applications where product is pumped to avoid oxidation. For food safety metal detection on food products as they travel through process pipelines...

FEATURING:

  • 4 inch diameter aperture opeing.

  • Suitable for 3 inch diameter pipeline (not included).

  • Integral opoerator controls with digital touch-pad control panel.

  • All food grade stainless steel construction.

  • For in-liquid metal detection and removal of metal contamination from pumpable food ingredients, viscous and liquid food products.


As of this writing, this industrial food process pipeline metal detector is in stock at ALARD, in EXCELLENT operational, electrical & cosmetic condition, available for immediate shipment as configured, OR can be completed by our shop to buyer specification with product tube, reject device and/or frame for a timely shipment.


CALL 315-589-4511
to confirm availability and discuss your food process metal detection needs.


ALARD item reference #: Y2621

PIPE-LINE METAL DETECTOR 4 inch opening, 3 inch tube, Y2634

PIPELINE METAL DETECTOR,
4 inch opening, 3 inch tube, food grade,
stainless steel.
..

y2634c_crop_email.jpg

A stainless steel Goring Kerr DSP2 inline metal detection sensor head configured for horizontal orientation use for detecting metal contamination in pumpable food products, including sauces, slurries, creams, oils, pastes, purees, salsas, refried beans, and other viscous or liquid food products hot or cold. Also useful for vacuum pack product applications where product is pumped to avoid oxidation. For food safety metal detection on food products as they travel through process pipelines...

FEATURING:

  • 4 inch diameter aperture opening.

  • 3 inch diameter anti-static plastic product through-tube with sanitary Tri-clamp connector fittings.

  • Integral operator controls with digital touchpad control panel.

  • All food grade stainless steel construction.

  • For in-liquid metal detection and removal of metal contamination from pumpable food ingredients, viscous and liquid food products.

As of this writing, this industrial food process pipeline metal detector is in stock at ALARD, in EXCELLENT operational, electrical & cosmetic condition, available for immediate shipment as configured, OR can be completed by our shop to buyer specification with reject device and/or frame for timely shipment.


CALL 315-589-4511 to confirm availability and discuss your pipe-ine metal detection equipment need.

ALARD item reference #: Y2634

Fortress PIPELINE METAL DETECTOR, 4 inch opening, Y2576


PIPELINE METAL DETECTOR, Fortress Phantom,
4 inch opening for 3 inch line, food grade,
stainless steel...


y2576b_crop_email.jpg

A stainless steel Fortress Phantom inline metal detection sensor head configured for horizontal orientation use for detecting metal contamination in pumpable food products, including sauces, slurries, creams, oils, purees, salsas, refried beans, and other viscous or liquid food products, hot or cold.



Available as-is as a head-only for completion by buyer, or Alard can install a product tube, and pneumatic reject valve per your specification: CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection need.

  • y2576c_crop_email.jpgIncludes a bolted-on stainless steel base, can be easily removed, modified, or used as configured.

  • Integral touchpad operator controls, with 99 product presets.

  • Food grade / USDA sanitary stainless steel, hose washdown; previously used in a USDA-inspected meat processing facility.

  • 110 volt single phase (standard household current) electrical input.


As of this writing, this Fortress Phantom food METAL DETECTOR for pipeline metal detection is in stock at Alard, in very good operational and electrical condition, available as-is for immediate shipment; --or can be configured to buyer specification for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food pipeline metal detection equipment need.

Alard item reference #:Y2576

Heinzen 2415 leafy greens WASHER, Y4079

HEINZEN / HMI Model 2415 "SHORT ORDER" TURBULENT-FLOW LEAFY GREENS WASHER.


Heinzen 2415 leafy greens WASHER VIDEO, Y4079
from Alard Equipment Corporation.

The Heinzen integrated short order wash system 24 inch, is manufacturer rated for quickly and gently washing, cooling and dewatering leafy greens tender-leaf fresh produce and pre-cut produce products.



  • 24 inch wide x 12 foot long immersion tank / turbulent flow wash trough.

  • (10) directionally adjustable water turbulence nozzles along the bottom of the tank.

  • Manual flow control valve to control volume of turbulent flow.

  • Sand trap with drain valve.

  • 24 inch wide by 63 inch long elevating discharge belt conveyor with interlocking plastic chain type belt, running between 5.5 inch high stainless steel sides which fold down for easy sanitation access.

  • The conveyor belt swings up at one end to loosen the belt for easy sanitation access.

  • (6) nozzle rinse spray bar over the discharge conveyor.

  • Washed product discharge funnel shrouds at discharge sized to feed Heinzen SD50 dryer baskets; --dryer unit not included, but as of this writing we do have a Heinzen SD-50 spin dryer (Y4078) available in stock: CALL 315-589-4511 to confirm centrifugal dryer availability, and to discuss your leafy greens / fresh produce washing and packing needs.

  • Includes integral frame-mounted hydrasieve screen with .040 inch screen sieve openings over 75 gallon surge water recirculation tank measuring 21 inches long by 50 inches wide by 19 inches deep. Complete with flat valves for water make-up.

  • Wash trough infeed height 33 to 38 inches, discharge height range of 29 inches to 34 inches on threaded rod adjustable feet.

  • 8 inch diameter clean-out ports on both make up tank and wash trough.

  • Includes Triclover Model C328MD centrifugal water recirculation pump rated 300 gallons per minute, with stainless steel shouded 5HP 230 volt 3 phase washdown drive motor.

  • All food grade sanitary stainless steel construction, included support frame.

  • Frame mounted stainless steel operator control panel with an Allen-Bradley variable speed controller.

  • Water refrigeration system not included, but we currrently have our Y3641 sanitary water chiller system if you need it; CALL 315-589-4511 to confirm wash water refrigeration availability, and to discuss your particular food equipment needs.

As of this writing, this turbulent flow "jacuzzi washer" is in stock at Alard, in excellent operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular leafy greens washing, processing and packaging needs needs.

Alard item reference #:Y4079

Video DEMO - Urschel G-A cutting french fry strips Y3963

VIDEO DEMO - Urschel G-A cutter
strip cutting french fries, chips, potato strips.


Video DEMO - Urschel G-A cutting french fry strips
from Alard Equipment Corporation.

The URSCHEL Model G-A DICER, strip cutter, slicer, French fry cutter, USDA sanitary stainless dicing machine, is a three dimensional continuous cutting machine, manufacturer rated for product input sized up to 5.5 inches (140mm) in any dimension.


Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.


Three cutting dimensions...

  • Slice thickness: From 1/8 inch / 3.2mm, up to 5/8 inch / 16mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches, (change part).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

  • Stainless steel slice shell and impeller with 7 inch slice shell opening.

  • USDA food grade sanitary stainless steel construction including stainless steel plated castings and spindle arms, stainless steel spindles, guards, shrouds and tubular stainless steel frame.

  • Aftermarket control box with safety interlock system.

  • Standard 2 HP 208/230/460 volt 3 phase drive.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y3963

Cryovac VFFS for pumpable foods in flexible pouches Y3978

VERTICAL FORM FILL SEALING MACHINE,
food grade, stainless steel, for liquids, sauces, slurries...

y3978a_crop_email.jpg

A Cryovac Model 2045D, automatic form fill seal flexible pouch / bag-former, filler, sealer, manufacturer recommended specifically for packing pumpable foods and liquids into flexible pouches; running a wide range of products including sauces, soups, ready-meals, processed fruits & vegetables, oil, condiments, liquid eggs, dairy products, etc...

FEATURING:

  • An automatic continuous form-fill-seal machine manufacturer rated for 28 pouches per minute.

  • Capable of packaging cold liquids as well as hot product with a 205 degree Fahrenheit maximum.

  • Handles particulates up to 0.25 inch.

  • y3978c_crop_email.jpgBag size / pouch size range:
    • 4 inch - 9.5 inch wide.
    • 6 inch - 15 inch long.
    • 6 oz. - 100 oz. volume.

  • Cryovac's unique squeeze-roller technology yields a pack with little to no head space in the package.

  • Manufacturer rated for product with or without particulates up to 30mm in diameter.

  • Touch screen operator control panel.

  • Food grade USDA sanitary stainless steel construction.

  • Does NOT include a feed pump. Manufacturer literature indicates this VFFS can be fed with a positive displacement lobe pump, or a piston filler; --and Alard usually has one or both available. Call 315-589-4511 to discuss your flexible pouch filler application.

  • Includes a 16 inch wide by 18 foot long takeaway / discharge conveyor with food grade plastic interlocking chain type belt.

  • Manual included.

  • 230/460 volt 3 phase electrical input.

  • Compressed Air requirement 90psi, 25 cfm.


As of this writing, this Cryovac vertical form fill seal machine (VFFS) is in stock at ALARD, in VERY GOOD mechanical & electrical condition, available for immediate shipment.

CALL 315-589-4511 for availability and to further discuss your food packaging needs.

ALARD item reference #: Y3978

WATER BIN UNLOADER with roller inspection, stainless steel, Y4020

APPLE BIN UNLOADER / DIP TANK,
with ROLLER INSPECTION CONVEYOR,
food grade stainless steel...

WATER BIN UNLOADER for fruit, apples, veggies, stainless steel Y4020
from Alard Equipment Corporation.

A water unloader for bins / totes of apples and other floating fruits and vegetables. This custom-built stainless steel Willsie tote unloader-rinser flume with a roller inspection discharge conveyor is configured to unload, dip wash & present fruit and vegetable products for visual inspection...

y4020k_crop_email.jpg

FEATURES:

  • WATER UNLOADER - Totes are placed onto an externally mounted hydraulic unloader and then lowered into a food grade stainless steel dip tank measuring 60 inches wide by 72 inches long by 48 inch deep.+ Exterior loader frame is painted steel, all wetted / product contact surfaces are stainless steel.

  • WASH TANK / FLUME - Fruit floats into the immersion washer / tank / flume assisted by the water flow created by a 1 HP powered belt drive 8 inch diameter recirculation impeller.

    • FLUME SECTION - Apples are pushed forward to the next 60 inch wide by 60 inch long by 20 inch deep flume tank section where they are and funneled to roller discharge conveyor...

  • ROLLER DISCHARGE INSPECTION CONVEYOR - 24 inch wide roller bed discharge / drying and inspection conveyor, with 2.5 inch diameter PVC rolls.

    • The roller bed conveyor lifts the apples out of the wash flume to drain for an initial 60 inch incline section, before cascading down a 50 inch long decline leading to an inspection area...

    • 24 inch wide by 76 inch long inspection section with full-length water catch pan with 1 inch drain.

    • 1.5 HP stainless steel shrouded motor with chain and sprocket conveyor drive.

  • All food grade stainless steel product contacts.

  • OPERATOR CATWALK - 37 inch wide by 81 inch long diamond plate tread operator inspection platform with steps, with painted steel rails and feet.

  • Includes control panel plus two (2) wireless remotes.

  • 208/230 volt 3 phase electrical input.

As of this writing, this bulk food product water unloading system for fruit is in stock at ALARD, in good condition, being sold AS-IS, available for immediate shipment OR can be run thru our shop for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4020

Refurbished food grade METAL DETECTOR with conveyor, 14x3, all stainless steel, Y4083

METAL DETECTOR with BELT CONVEYOR, 14x3,
all stainless steel...

y4083a_crop_email.jpg

A refurbished Goring Kerr model DSP2S metal detector head on a NEW stainless steel thru-conveyor...

  • 3 inch high by 14 inch wide net USABLE aperture opening with the conveyor belt in place.

  • NEW stainless steel belt transfer through-conveyor, with a 60 inch long by 12 inch wide interlocking plastic chain type belt running over an anti-static UHMW plastic bed.

  • Washdown stainless steel search head enclosure, with new water-tight epoxy chute/ liner.

  • Integral digital operator controls for metal detection head.

  • Integrated belt-stop alarm reject system, with new stainless steel reject system control box.

  • Stainless steel power supply enclosure.

  • New PVC electrical enclosure box with VFD variable speed control for the conveyor belt.

  • 32 inch working height on threaded rod adjustable feet.

  • Fractional horsepower conveyor belt drive with variable speed controller.

  • 110 volt single phase (standard household current) electrical input.


A food grade belt transfer metal detection system for food processing and / or other industrial process applications.

As of this writing, this reconditioned metal detector on a NEW conveyor is stored at a location nearby to Alard, in like-new / EXCELLENT operational, electrical, mechanical and cosmetic condition,available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular metal detection equipment need(s).

Alard item reference #:Y4083

Tri-Clover TRI-BLENDER, DTL Blender, inline high-shear liquid-powder mixer, Y3854

Tri-Clover TRI-BLENDER,
POWDER DISPERSER / HIGH SHEAR MIXER...

y3854t_crop_email.jpg

The Triclover Tri-Blender, now also known as the Waukesha Cherry Burrell DTL BLENDER (since Tri-Clover was purchased by SPX) are manufacturer recommended for thoroughly & efficiently blending dry ingredients and liquids, or for blending two liquids into a homogenous liquid, while minimizing air introduction; in a variety of blending applications including food, beverage, dairy, chemical & pharmaceutical process production.


APPLICATIONS per manufacturer literature:

  • Blending Stabilizers - such as with fresh milk, liquid eggs, ice cream mix

  • Blending Liquid Syrup - such as with raw sugar or water

  • Blending Food Products - such as whey and water, powdered eggs to liquid, liquid syrup with liquid eggs and flavorings

  • Blending Chemical Products - such as sodium silicoaluminate, film solution, irium, fertilizer


FEATURES:

    • Manufacturer rated for absorbing dry powders into liquids at a rate of up 100 lbs (45 kg) per minute.

    • INLINE powder mixer / high-shear pump for continuous operation, with uniform material absorption.

    • 24 inch diameter by 22 inch deep cone hopper with cover & 3 inch manually actuated butterfly valve.

    • 1.5 inch liquid indeed with valve.

    • y3854x_crop_email.jpg4 inch by 4 inch vortex high-shear mixing chamber.

    • 7 5/8 inch impeller powered by 15 HP motor.

    • 2 inch pump discharge.

    • Infeed and discharge ports have USDA sanitary Tri-clamp connections.

    • All food grade USDA sanitary stainless steel construction including base and T316 stainless steel wetted parts.

    • 208 / 230 volt 3 phase electrical input.

As of this writing, this high-shear mixer, blender, emulsifier, homgenizer, liquifier, powder dispersing machine is in stock at ALARD, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.


CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y3854

Safeline FOOD METAL DETECTOR with CONVEYOR, Y3961

Safeline FOOD METAL DETECTOR
with BELT CONVEYOR, push-off reject.

y3961d_crop_email.jpg

A refurbished Safeline PowerPhase Plus metal detector for food product metal detection and other related industrial production applications, complete with integrated belt transfer thru-conveyor with pneumatic cylinder pushoff reject...


FEATURING:

  • 8.5 inch high by 6.75 inch wide USABLE aperture opening dimensions with the conveyor belt in place (9.75 inch overall aperture height).

  • Epoxy painted aluminum search head with integral digital touch pad controls.

  • Mounted on a stainless steel transfer thru conveyor frame with 5 inch wide by 68 inch long food grade plastic interlocking chain type belt.

  • 37 inch working height with left to right flow from perspective of operator control position.

  • y3961j_crop_email.jpgPneumatic cylinder reject system -- when metal contamination is detected, the air powered plunger will push product into a 12 inch wide by 10 inch long by 24 inch deep catch box with lockable door.

  • 110 volt single phase (standard household current) electrical input.

As of this writing, this refurbished Safeline conveyorized metal detection system is in stock at ALARD, in EXCELLENT operational, electrical, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for availability and to further discuss your food safety needs.


ALARD item reference #: Y3961

Refurbished Fitzpatrick Fitzmill DAS06, Alard item Y4012

FITZPATRICK INDUSTRIAL IMPACT MILL, 6 inch, 7.5HP...

y4012o_crop_email.jpg

A reconditioned Fitzmill Model DAS06 comminutor hammer-mill cutter-grinder with food grade stainless steel product contacts, and a 7.5HP motor drive; for controlled particle size reduction in the context of industrial processing of food, chemical and other bulk material cutting, grinding and milling applications.

OPERATION:

Hammer mills rely on the simple principle that most solid materials shatter or shred upon suitably vigorous impact. In essence, hammer mills excel at cutting, grinding and crushing. In most instances, industrial hammer mills harness gravity to carry raw materials into a hopper, where a rapidly spinning rotor allows hammers and/or knives to strike the raw materials repeatedly, pulverizing or cutting them to a relatively uniform consistency. Through the application of mechanical impact forces -- in the form of multiple knife cuts or hammer blows -- bulky raw materials are transformed into uniform particles. Hammer mill grinders provide a quick, efficient method to size reduce raw materials and achieve a uniformed processed product.

APPLICATIONS:

Manufacturer literature recommends the Fitzpatrick DAS06 model for:

  • Coarse grinding and chopping of dry material

  • Size reduction of wet material

  • De-lumping of agglomerated wet and dry materials / lump breaking / lump breaker

  • Pulverizing / pulverizer
  • Solid / liquid blending

  • Granulating compacted materials

  • Processing slurries and liquids

  • Processing and conditioning wet and dry materials

  • Pureeing and emulsifying


FEATURING:

  • Stainless steel infeed pan with dust-flap cover.

  • y4012u_crop_email.jpg6 inch by 10 inch cutting / milling / comminution chamber, with horizontal shaft fitted with sixteen (16) stainless steel fixed blades/hammers -- sharp on one side & broached on opposing side (other configurations available optionally, call 315-589-4511 to discuss your cutting specifications), over an interchangeable sizing screen.

  • Screen perforation shape and size determine particle size reduction.

  • 61 inch infeed height. 31 inch discharge height.

  • Food grade stainless steel product contact surfaces.

  • Painted steel frame and legs.

  • 5 HP 230/460 volt 3 phase drive with stainless steel belt guards.


As of this writing, this refurbished Fitzpatrick Fitzmill comminuting machine is in stock at ALARD, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4012

SWECO SCREEN, round, 24 inch diameter, stainless steel, Y3646

SWECO SCREEN,
round, 24 inch diameter, stainless steel...

y3646d_crop_email.jpg

A Sweco Vibro Energy round separator, this Model LS 24S44 vibrating separator screen is manufacturer recommended separating solids from liquid (dewatering) and / or for sifting, fines removal, sliver removal, lump removal, and other or size grading applications. Sweco industrial screens and sifting machines are widely used in particle separation and water recovery applications across the food processing industry.


OPERATION:

Basically, the SWECO Separator is a vibratory screening device that vibrates about its center of mass. Vibration is accomplished by eccentric weights on the upper and lower ends of the motion-generator shaft. Rotation of the top weight creates vibration in the horizontal plane, which causes material to move across the screen cloth to the periphery. The lower weight acts to tilt the machine, causing vibration in the vertical and tangential planes. The angle of lead given the lower weight with relation to the upper weight provides variable control of the spiral screening pattern. Speed and spiral pattern of material travel over the screen cloth can be set by the operator for maximum throughput and screening efficiency of any screenable product ... wet or dry ... heavy or light ... coarse or fine ... hot or cold.


FEATURES:

  • Single deck / single screen configuration, with two discharges / grades, product which does not drop through the screen, and product which does...

  • 24 inch diameter screen/deck with 4 inch high side rings.

  • 6 inch diameter side discharge port on upper ring.

  • Last used as a dewatering screen, this Sweco screen has a 2 inch diameter Tri-clamp liquid discharge on it's lower ring; this could be easily changed to another connector fitting.

  • All food grade stainless steel product contact surfaces.

  • Painted steel support base mounted on a tubular stainless steel frame.

  • 208/230 volt 3 phase 1/3 HP drive motor.

  • Additional rings and screens are available from the manufacturer for multi-deck set-ups.

As of this writing, this vibrator separating screener is in stock at ALARD, in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food handling needs.

Alard item reference #: Y3646

INSPECTION CONVEYOR, 3 level coring line, stainless steel, Y3980

THREE-LEVEL INSPECTION BELT / CORING CONVEYOR / TRIM TABLE /
FRUIT and VEGETABLE PACKING CONVEYOR,
stainless steel, 8-12 station...

y3980k_crop_email.jpg


A three-conveyor inspection table, trimming line / coring line for hand-trimming, coring, sorting, grading, quality inspection and/or packing fruit & vegetable products into boxes or cases, in the context of fresh produce packing, or fresh cut / pre-cut produce packaging, frozen food, canning, and other industrial food processing applications. Consists of a main pick belt with an overhead sorted product takeaway conveyor and lower waste takeaway conveyor...


FEATURING:

  • 20 inch wide by 18 foot long main / middle level infeed / inspection belt.

  • 12 inch wide by 18 foot long good product takeaway belt on top.

  • 14 inch wide by 12 goot long waste takeaway belt beneath.

  • Last used as an eight-person trim line with 4 UHMW plastic trim-stations on each side, but has room for up to six workstations on each side for use as a twelve-workstation 12 person sorting and grading conveyor.

  • Each work-station is equipped with a 2 inch diameter letttuce / cabbage coring knife with trough-access down to the waste belt.

  • The main / middle belt has a dam at the end, so each item of product must be inspected and/or trimmed and placed on either one of the takeaway conveyors.

  • All sanitary stainless steel construction with white rubberized food grade conveyor belts.

  • Individual fixed speed drive for each of the three (3) belt conveyors.

  • 208/230/460 volt 3 phase electrical input.

  • Includes two (2) 30 inch wide by 12 foot long stainless steel operator catwalk / raised platforms with fiberglass decking.

As of this writing, this inspection conveyor / coring line is in stock at ALARD in good condition, available for immediate shipment AS-IS...OR can be serviced by our shop prior to shipment with new belts, and otherwise refurbished per buyer preference for a timely shipment.


CALL 315-589-4511 to confirm availability, and to discuss your food handling needs.

ALARD item reference #: Y3980

Fruit BRUSH WASHER waxer, vegetable scrubber, all stainless steel, Y4015

FRUIT BRUSH WASHER WAXER,
VEGETABLE SCRUBBER,
all stainless steel...

y4015a_crop_email.jpg

An all stainless steel Willsie 24 inch continuous produce brush washer / waxer for fast, efficient cleaning of spherical shaped fruits & vegetables for fresh-pack, fresh market produce, juice production, frozen food processing, canning, etc. Previously used for waxing and polishing apples, but suitable for polishing other round fruits and vegetables such as oranges lemons, limes / citrus, bell peppers, potatoes, as well as straight oblong products like cucumbers, potatoes, sweet potatoes, zucchini and squash.


OPERATION:

As produce contacts the spinning brushes, it creates a rotating and tumbling action which maximizes the surface exposed for wet cleaning / scrubbing or can be run dry for polishing.

FEATURING:

  • y4015f_crop_email.jpgTwenty-three (23) 24 inch wide x 5 inch diameter brush rolls, which run perpendicular to the product flow.

    • Presently equipped with soft tufted brush rolls.

    • Brushes are stainless steel chain driven with stainless steel sprockets.

    • Solid plastic brush roller cores eliminate any rust concerns.

    • 10 foot overall length of brushing action, consisting of a 3 foot long spraying / waxing section (applicator not included), and a 7 foot long dry polishing section, with a plastic curtain between the two.

    • 41 inch infeed height and 37 inch discharge height, with adjustable legs.

  • Two (2) overhead water spray nozzles but can be modified to other washing configurations.

  • Full length bottom water collection pan with two (2) 1.5 inch diameter discharge drains.

  • Top mounted 1.5 HP stainless steel motor.

  • Removable stainless steel side panels for easy access for cleaning and maintenance.

  • All food grade sanitary stainless steel construction.

  • 230/460 volt 3 phase elecctrical input.


As of this writing, this fruit and vegetable produce polisher is in stock at ALARD, in very good condition and available AS-IS for immediate shipment OR can be serviced by our shop to buyer specification for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y4015

Food grade METAL DETECTOR with CONVEYOR, 14x15, stainless steel, Y3950

FOOD GRADE METAL DETECTOR with CONVEYOR
14x15, Cassel Metalshark2, all stainless steel, with reject...

y3950c_crop_email.jpg


A NEW Cassel Metalshark2 MULTI-FREQUENCY T304 stainless steel metal detector for industrial process applications, with a refurbished stainless steel frame belt conveyor, all food grade stainless steel...


FEATURES
:

  • A 13.5 inch (343mm) high by 14.75 inch (375mm) wide net USEABLE aperture opening with the conveyor belt in place...

  • The reconditioned 304T stainless steel frame belt transfer conveyor has a new 65 inch long by 12.75 inch wide food grade plastic interlocking chain type belt.

  • The pre-owned / refurbished thru-conveyor is complete with a belt-stop-alarm reject system, with a reject BEACON signal, for rejection and notification of contaminated product detection.

  • The new Cassel Metal Shark food grade metal detector head is specifically built for food processing and other industrial production line metal detection applications USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65 / Nema4, 4x, 6, 12 & 13 control enclosure).

  • The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a stainless steel enclosure.

  • Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • 208 / 230 volt three phase electrical input.

  • .5 HP three phase conveyor drive motor.

  • MULTI-FREQUENCY metal detection search head: allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn" mode to maximize sensitivity / minimize false rejects with your specific product.

  • Sensitivity varies depending on product run, and frequency setting (determined by product characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product effect" in to the equation.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The operator controls allow for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board; --this maximizes reliability, and minimizes maintenance expenses.

  • The metal detection head is NEW equipment and includes a 2 year manufacturer warranty on hardware / parts. The metal detector thru-conveyor is refurbished to EXCELLENT operational, mechanical, electrical, and cosmetic condition .


As of this writing, this metal detection system with a NEW metal detector on a pre-owned belt conveyor is in stock at Alard fully and in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food process metal detection equipment need.

Alard item reference #:Y3950

STEAM BLANCHER Rietz Thermascrew TL-30, Alard item Y3932

Rietz Thermascrew STEAM BLANCHER,
Model TL-30-K2220, all stainless steel...


y3932b_crop_email.jpg


A food grade stainless steel Reitz-Bepex Model TL30-K2220 OPEN SCREW BLANCHER / live steam cooker, 30x20 for industrial food process fruit and vegetable blanching, and / or cooking by steam.



FEATURES:

  • 30 inch diameter by 20 foot long open screw for controlled, consistent product blanch / cook time.

  • The screw auger has 9 5/8 inch high flights as measured from the center hub; the flights are 12 inch pitch (12 inches from flight to the next).

  • Has thirty (30) live steam injection ports/diffusers along the bottom of the bottom trough.

  • Four (4) hinged top covers with support props.

  • 12 inch by 30 inch flanged bottom end discharge.

  • 8 inch flanged steam / vapor vent over discharge end.

  • Food grade sanitary stainless steel construction.

  • Bolted-on 4 foot wide by 21 foot long painted steel riser stand with galvanized steel tread operator catwalk / work platform (can be removed if buyer doesn't want it shipped); --this riser frame places the scalder at an 8 foot infeed height and 4 foot discharge height.

  • 2 HP 230/460 volt 3 phase mechanical variable speed drive.

As of this writing, this Rietz industrial food process steam blancher is in stock at ALARD, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular commercial-scale fruit and vegetable steam cooker equipment needs.

Alard item reference #: Y3932

VERTICAL DESTONER, 24 inch diameter, stainless steel, Y3935

y3935o_crop_email.jpgVanmark HYDROLIFT DESTONER,
24 inch diameter, stainless steel...

The Hydrolift VERTICAL DESTONER continuously rinses and removes debris and rocks from root crop vegetables including potatoes, carrots, sweet potatoes, yams, beets, onions, as well as other fruit and vegetable products; while elevating it to the next step in your process.

OPERATION:

The vertical auger creates water turbulence that separates stones and debris from product, removes rock, washes loose dirt away, and acts as a hopper-feeder lifting the product to the discharge point. Separated rock, dirt and debris settle at the bottom of the tank. The Hydrolift also provides your product with a water-rinsing soak bath, where the use of anti-oxidants in the solution can help prevent discoloration and provide a final washing to improve the quality of your finished product.

FEATURES:

  • Combination all-in-one destoner / vertical elevator / dip tank configuration provides triple-utility in a small footprint for maximum plant floor-space utilization.

  • 24 inch long by 58 inch wide by 30 inch deep stainless steel wet hopper infeed, with water inlet and overflow connections.

  • Large 24-inch diameter auger allows for a wide range of food product type and sizes, with tens of tons-per-hour high capacity.

  • 144 inch (12 foot) product discharge height, with a 26 inch wide by 18 inch high flanged outlet opening, on stainless steel support frame.

  • 12 inch by 17 inch bottom access plate, with water drain port, for cleanout.

  • Food grade all stainless steel construction.

  • 10HP 3-phase drive.

As of this writing, this stainless steel Hydrolift continuous inline screw auger destoner is in stock at Alard, in good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process vegetable washing equipment needs.

Alard item reference #: Y3935

Rietz EXTRUCTOR RE10 pulverizer Y3970

RIETZ EXTRUCTOR Model RE10
frozen block grinder...

y3970_in_process_c_crop_email.jpg

A Rietz Bepex Model RE-10-K5F431 EXTRUCTOR industrial food pulverizer machine, engineered with slow speed and high torque for fracturing, crushing, grinding and tearing large frozen blocks or barrels of bulk materials, such as animal products, meats, cheese, fruits and / or vegetables...


FEATURING:

  • 15 inch by 18 inch tapered hopper with safety grid.

  • 10 inch diameter auger.

  • 76 inch high infeed and 59 inch high discharge.

  • 25 HP electric motor with chain drive.

  • Hinged main body.

  • All food grade stainless steel.

  • Mounted on 10 inch high platform.

  • 460 volt 3 phase electrical input.

  • Includes one (1) grinding plate from existing stock.

As of this writing, this Rietz Extructor is in stock at ALARD, in EXCELLENT mechanical & cosmetic condition, available for immediate delivery.

CALL 315-589-4511 to confirm availability, and to discuss your industrial food process cutting, grinding, pulverizing, and particle size reduction needs.

ALARD item reference #: Y3970

Reconditioned URSCHEL GA DICER, Y3963

Refurbished URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter,
USDA sanitary stainless steel...

y3963zb_crop_email.jpg

A three dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions...

  • Slice thickness: From 1/8 inch / 3.2mm, up to 5/8 inch / 16mm, (knob adjustable).

  • Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).

  • Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches, (change part).

  • By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).

  • We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

  • Stainless steel slice shell and impeller with 7 inch slice shell opening.

  • USDA food grade sanitary stainless steel construction including stainless steel plated castings and spindle arms, stainless steel spindles, guards, shrouds and tubular stainless steel frame.

  • Aftermarket control box with safety interlock system.

  • Standard 2 HP 208/230/460 volt 3 phase drive.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y3963

Olney GP FLOATATION / DESTONING WASHER, Y3837.

FLOATATION WASHER
with DESTONER & DEWATERING SCREENS...


y3837zg_crop_email.jpg

Offering a combination of floatation as well as destoning, the Olney Model GP WASHER/DESTONER is manufacturer recommended for the elimination of light trash such as skins, hulls, leaves, pods/sticks and dirt; as well as heavy impurities including stones, mud balls, sand, dirt & glass; on a variety of products from nuts, shrimp, clams, kernel corn & blueberries to dry beans and/or rehydrated / soaked beans; including kidney, black, pinto, garbanzo, navy, lentils, chick peas, black-eyed peas, etc. Floatation cleaning is more efficient with rehydration.

FEATURING:

  • Manufacturer rated for 5000 lbs. (2267 kg) per hour on dry beans and 10,000 lbs per hour on rehydrated beans.

  • Infeed dewatering shaker:
    • 71 inch infeed height.
    • 54 inch wide by 56 inch long bed.
    • 1/8 inch flat rod with 1/16 inch sieves.
    • Rods run perpendicular to flow.
    • Ajax eccentric drive.
    • 6 inch center bottom outlet drain.

  • Floatation Wash Tank:
    • 45 inch long.
    • "Floater" overflow such that floaters are moved down and deposited on lower level screen of discharge shaker.

  • Riffle Board:
    • 60 inch long.
    • Manual lever which will lift/tilt riffles and flush debris to catch tray.

  • Discharge Dewatering Shaker:
    • Dual Deck.
    • 54 inch wide by 56 inch long.
    • 1/8 inch flat rod with 1/16 inch sieves (top screen) and 3/32 inch perforations (bottom screen).
    • Top screen is for good product while bottom screen handles floaters & waste.
    • Ajax eccentric drive.
    • 47 inch discharge height.

  • 15HP Crane/Deming Model 5M cast iron 10 inch recirculating pump.

  • All sanitary food grade stainless steel construction.

  • 230/460 volt 3 phase electrical input.

As of this writing, this Olney Model GP Floatation Washer with stone removal is in stock at ALARD, in GOOD operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your food processing needs.

ALARD item reference #: Y3837

Lyco CHILL-FLOW POUCH COOLER, Y3930

CONTINUOUS POUCH COOLER

y3930c_crop_email.jpg

A Lyco Model 8700 specifically engineered as a bag / pouch cooler. Submerged water cooling is the most efficient & economical method of cooling volumes of food products, and the agitation and movement of the pouches as they pass through the cooling reel only adds to this efficiency. Manufacturer literature recommends for sous vide pouches ranging from small packs of restaurant ketchup up to 5 or 10 pound bulk food service sizes; running products not limited to but including sauces, soups, chowders & pet foods...



OPERATION:

Product enters the cylinder through an open throat, water-cushioned entry design that keeps pouches safely handled while being cooled. As they proceed through the rotary drum cylinder, the pouches are totally submerged in water, then gently stirred using Lyco's proprietary Hydro-Flow technology. This Lyco Hydro-Flow agitation keeps pouches suspended in motion which cools 40% faster than sitting statically on a belt conveyor. This method ensures product is quickly cooled all the way through to the center of the package.


FEATURING:

  • 72 inch diameter by 24 feet long cooling reel.

  • Removable 3/8 inch perforated screen.

  • 24 inch diameter open throat infeed.

  • Cushioned entry design ensures pouches are safely handled while being cooled.

  • Gentle "Hydro-Flow" water agitation keeps pouches suspended in motion which decreases cooling time.

  • Two way pivoting top cover with pneumatic cylinder power lift.

  • Built in CIP system including centrifugal pump for sanitation.

  • USDA sanitary stainless steel construction.

  • 230/460 volt 3 phase electrical input.

  • INCLUDES Chester Jensen Plate Chiller and RP Products LP Series Bag Water Filter.


As of this writing, this Lyco Pouch Cooler is in stock at ALARD, in very good condition, being sold AS-IS and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial food process cooking and cooling equipment needs.

ALARD item reference #: Y3930

About this Archive

This page is an archive of entries from October 2018 listed from newest to oldest.

September 2018 is the previous archive.

November 2018 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)