A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

June 2018 Archives

Forsberg 8400 dry bean SCREEN SEPARATOR / AIR CLEANER, Y3603

SCREEN SEPERATOR for DRY BEANS...

y3603za_crop_email.jpg

A Forsberg's Model 8400 x 60 Screen-Aire Type Seperator with a positive eccentric; a high-speed, vibrating screener manufacturer recommended for accurate, high capacity and high quality seperation specifically for the dry bean industry...

FEATURES:

  • Dual deck with easily changeable screens:
    • Woven wire screens measure 60 inch wide by 84 inch long.
    • Top screen has 1 inch clear openings with ball cleaner system to prevent blinding.
    • Lower screen has 3/16 inch clear openings.

  • Series 8400 standard four-bearing design and isolation mounts.
    • By incorporating outboard bearings mounted on an isolation mount and inboard bearings mounted on screener body, a positive eccentric motion is achieved regardless of load on the screen.
    • Outboard bearing isolation mounts, combined with the unique balancing system, make the frame virtually vibration free.
    • Screen support grid requires no hold-downs, thus allowing each screen to be easily changed.

  • This Forsberg screen separator is bolted to a heavy duty tubular support riser frame.
    • Approximate 12 foot infeed height.
    • Approximate 5 foot discharge height.

  • Three (3) discharge design with manually adjustable negative air louvers, to adjust air flow.
    • Coned bottom pan for discharge of fines.
    • End discharge for usable product.
    • Side discharge for larger debris.

  • 7.5 HP Oneida Air Systems cyclone-powered negative air system.

  • Underside mounted vibratory / eccentric 3 HP drive motor.

  • All painted stainless steel construction.

  • 230/460 volt 3 phase electrical inputs.


As of this writing, this DRY BEAN SCREEN SEPARATOR / AIR CLEANER is in stock at ALARD, in GOOD condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular dry bean processing equipment needs.

ALARD item reference #: Y3603

METAL DETECTOR, food grade, conveyorized, Fortress Phantom, Y3946

FOOD METAL DETECTOR
with BELT CONVEYOR, 20x7...

y3946a_crop_email.jpg


A refurbished Fortress Phantom food grade metal detector head on a NEW stainless steel thru-conveyor...


FEATURING:

  • 7 inch high by 20 inch wide net USABLE aperture opening with the conveyor belt in place.

  • NEW stainless steel belt transfer through-conveyor, with a 60 inch long by 18i nch wide
    interlocking plastic chain type belt running over an anti-static UHMW plastic bed.

  • Epoxy-painted aluminum head enclosure with factory chute / liner.

  • Integral digital operator controls for metal detection head.

  • Integrated belt-stop alarm reject system, with new gasketed stainless steel control box.

  • 32 inch working height on threaded rod adjustable feet.

  • Fractional horsepower conveyor belt drive with variable speed controller.

  • 110 volt single phase (standard household current) electrical input.


A food grade belt transfer metal detection system for food processing and / or other industrial process applications.

As of this writing, this reconditioned metal detector on a NEW conveyor is in stock at Alard, in EXCELLENT operational, electrical, mechanical and cosmetic condition,available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular metal detection equipment need(s).

Alard item reference #:Y3946

Food grade METAL DETECTOR with conveyor, 16x7, stainless steel Y3945

FOOD METAL DETECTOR with BELT CONVEYOR,
16x7, all stainless steel...

y3945a_crop_email.jpg

A refurbished Goring Kerr model DSP food grade stainless steel metal detector head on a NEW stainless steel thru-conveyor, wash-down configuration...



FEATURING:

  • 7 inch high by 16 inch wide net USABLE aperture opening with the conveyor belt in place.

  • NEW stainless steel belt transfer through-conveyor, with a 60 inch long by 14 inch wide interlocking plastic chain type belt running over an anti-static UHMW plastic bed.

  • Stainless steel head enclosure, with new water-tight epoxy chute/ liner.

  • Integral digital operator controls for metal detection head.

  • y3945b_crop_email.jpgIntegrated belt-stop alarm reject system, with new gasketed stainless steel control box.

  • Water resistant for low pressure, gentle hose washdown configuration; for wet environment operations such as pre-cut produce / freshcut processing and packaging operations.

  • 32 inch working height on threaded rod adjustable feet.

  • Fractional horsepower conveyor belt drive with variable speed controller.

  • 110 volt single phase (standard household current) electrical input.


A food grade belt transfer metal detection system for food processing and / or other industrial process applications.

As of this writing, this reconditioned metal detector on a NEW conveyor is in stock at Alard, in EXCELLENT operational, electrical, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular metal detection equipment need(s).

Alard item reference #:Y3945

Burt 704 LABELER Y3877

BURT 704
HORIZONTAL ROLL-THROUGH LABELER.

y3877i_crop_email.jpg

A Pneumatic Scale Angelus Burt model 704DG roll-thru labeling machine manufacturer recommended apply full-wrap labels to cylindrical containers of virtually any material at speeds up to 800 cpm...

  • Manufacturer rates for container diameter 1.75 inch (45mm) to 7.25 inch (184 mm) / can diameter from 112 to 704, and container height from 1.56 inches (40mm) to 10.5 inches (267mm) / can height up to 108 to 1008.

  • Crank adjustable for container size (requires changes in trasfer belt setups to run low end of range of rated range).

  • Manufacturer rates label lengths from 4.63 inches (117mm) to 24 inches (610mm) and label width from 1.5 inches (38mm) to 9.25 inches (235mm). Label bed change parts required to run full rated label range. Call 315-589-4511 to discuss YOUR particular labeling specifications for more details.

  • Manufacturer literature specifies this model as able to apply a broad range of labeling materials including papers, foils, plastics and laminates, onto tin, composite, glass or plastic containers, for maximum flexibility. Different transfer belt configurations required for different container characteristics and sizes (e.g. "low can).

  • This machine comes with V-belt transfer-belts for positive container control running cans or jars.

  • Hydraulic label feed system smoothly and accurately positions labels.

  • Hot melt label pickup with cold glue lap paste, for reliable, secure application and neat appearance.

  • Left to right container flow direction from operators position.

  • 208/230 volt 3 phase electrical input

  • Previously labeled #10 (603 x 700) cans.


As of this writing, this Burt labeler machine is in stock at Alard, in very good operational, mechanical, electrical, hydraulic and glue system condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food packating label application equipment need.

Alard item reference #:Y3877


ONION TRIMMER-PEELER, Y3894

ONION PEELER,
with trimmer, scorer and polisher
VIDEO WALK-THRU...

y3894 onion peeling system from Alard Equipment Corporation.


An industrial capacity Magnuson continuous onion peeling line with trimming, scoring and polishing components, with dip-tank / rinser discharge; food grade, stainless steel.

FEATURING:

  • Magnuson onion cutter with feed hopper, tip and butt cutter / trimmer section, with scoring knives to loosen the outer layers of onion skins.

  • Magnuson WSP model brush-washer finisher for removing the loosened onion skins and polishing the finished onions.

  • Includes connecting / elevating covnveyor to carry the trimmed and scored onions from the cutter to the brush-washer finisher.

  • Includes waste takeaway conveyor which removes waste for both the cutter and the brush-washer finisher.

  • Dip-and-rinse tank with elevating discharge conveyor, with discharge chute.

  • Includes connecting / elevating conveyor which conveys the peeled onions from the brush-washer to the dip tank.

  • All components are food grade stainless steel construction.

  • Onion trimmer-scorer is hydraulically driven, with integral 3-phase hydraulic power pack.

  • 4-roll brush-washer-finisher is hydraulically driven, with a standalone hydraulic power pack included.

  • 3 phase drives on conveyors.

  • Previously used for preparing fresh peeled onions in preparation for dicing and shredding for relish, salsa, and other uses.


As of this writing, this onion peeling system is in stock at Alard, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

Alard item reference #:Y3894

Brown 3600 lab juice extractor-finisher Y3867

LAB SIZE JUICE EXTRACTOR FINISHER,
food grade stainless steel...

y3867zf_crop_email.jpg

A Brown International Model 3600 pilot plant screw press, juice extractor finisher, for juice extraction, finishing and/or seperating solids from liquids...

Manufacturer rated for:

  • 2 to 10 gallons pre minute (120 to 600 gallons per hour).

  • Up to 40psi extraction pressure.

  • Continous smooth operation and efficiency.

  • Features the same screw design as the Brown model 303, 2503, and 3900 juice extractor finishers, so that pilot plant work can usually be scaled up to production with good results.

FEATURING:

  • 12 inch by 12 inch tapered stainless steel infeed hopper.

  • y3867zk_crop_email.jpg16 inch long continuous screw auger running at close tolerances inside an interchangeable screen cylinder.

  • Pressing / extraction chamber measures 5 inch diameter by 11.25 inches long.

  • Two-piece screen assembly, with perforated stainless steel screens in stainless steel backing frames, with .033 inch screen perforations.

  • Pneumatic adjustable cone discharge, to regulate finished solids content.

  • Underside liquid collection pan with 1.5 inch sanitary Tri-clamp center bottom outlet.

  • y3867zs_crop_email.jpgMounted on 4 inch caster wheels for added mobility.

  • Food grade sanitary stainless steel construction.

  • 2 HP Reeves variable speed drive.

  • 230/460 volt 3 phase electrical input.

As of this writing, this small screw press is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for current availability, and to discuss your particular juice and liquid extraction needs.

ALARD item reference #: Y3867

Refurbished Urschel RAA DICER, Alard item Y3810

URSCHEL Model RA-A DICER / CUBER cutting machine.


y3810y_crop_email.jpg

A 3-dimensional industrial food process fine dicing machine for a wide range of dices and strip cuts from a variety of food products such as relish, salsa, fruits, vegetables, nuts, cheeses, and processed meats.







FEATURING:

  • Maximum product input size 3.5 inches (88.9mm) in any dimension.

  • Three cutting dimensions:

    • Slice thickness: 1/16 to 3/8 inch 1.6 to 9.5 mm, knob adjustable.

      y3810x_crop_email.jpg
    • Circular knife cuts: 1/8 to 1 inch / 3.2 to 25.4 mm, knives & spacers.

    • Crosscut knife cuts: .05 to 3 inch / 1.3 to 76.2 mm, change part.

    • CALL 315-589-4511 to tell us YOUR cutting specification!

  • All food grade USDA sanitary stainless steel construction.

  • Factory control panel with aftermarket safety interlock system.

  • 5HP 208 / 230 / 460 volt 3 phase drive motor.


As of this writing, this reconditioned Urschel RA-A dicer is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your high-capacity food process cutting machine need.

Alard item reference #: Y3810

TAMPER EVIDENT BANDER for cups, tubs, cans, Y3853

TAMPER EVIDENT BANDER, PDC F-SERIES,
food grade stainless steel shrinkbander
for shoulderless containers such as cups, tubs, jars, cans...

y3853a_crop_email.jpg

A PDC Model F-200-10 tamper evident banding machine with PDC Model SN-14 tabletp chain through conveyor for the application of shrink sleeves around the upper portion of tapered or straight walled shoulder-less containers, for goods, beverages, dairy products, and pharmaceutical applications including ice cream, dried fruit, cultured dairy products and dips, margarine, butter, and other containers that do not have a shoulder on which the band can rest.


FEATURING:

  • Manufacturer rated for up to 200 containers per minute.

  • Set for last used on approximately 4 inch diameter round containers using a 4.5 inch form tube and 7.5 inch wide film which is cut into 1 inch high bands.

  • Appoximately 6 inches of container height adjustment.

  • Left to Right product flow with worm star discharge timing system.

  • Positive mechanical band placement and control, with pre-shrink to hold the bands in place, prior to moving down the line (e.g. to a shrink tunnel, not included unless otherwise written) for positive and precise band placement for banding round straight-sided vertical-walled shoulderless jars, cans, canisters, tubs, and/or cups; --containers with no ledge for the bands to rest on.

  • HEAT SHRINK TUNNEL available with or without an AXON EZ-48 stainless steel heat tunnel.

  • 4 inch wide by 14 foot long thru-conveyor with plastic chain belt and UMHW lined stainless steel guide rails.

  • Food grade sanitary stainless steel construction.

  • Stainless steel NEMA-4 operator control panel and electrical enclosure.

  • 220 volt single phase electrical input.

As of this writing this PDC F-series shrinkbander with heat shrink tunnel is in stock at ALARD, in VERY good operational condition, available for timely shipment...

CALL 315-589-4511 to confirm availability, and to discuss the details of your particular tamper evident banding / tamper-evident band applicator equipment needs.


ALARD item reference #: Y3853

TRAY SEALER, vacuum, gas-flush, Y3845

VACUUM GAS-FLUSH TRAY SEALER,
semiautomatic, food grade...

Ross Inpack Junior A10 VACUUM TRAY SEALER, item Y3845
from Alard Equipment Corporation.

The Ross Inpack Junior Model A10 preformed tray packaing machine, is a film tray sealer for modified atmopsphere packaging (MAP), OR seal-only packaging, for a wide variety of tray options and food products. Manufacturer literature recommends this model for producing sealed, tamper evident, leakproof packages in food packaging applications for food products fruits, vegetables, fresh red meats, poultry, pork, seafood, prepared meals, sandwiches, pasta, cheeses and breads...


FEATURES:

  • Semi-automatic operation for up to 5 cycles per minute.

  • Presently set for:
    • DuraFresh F89250M (8 pound) trays.
    • One up application.
    • Tray carrier "die" measures approximately 11 7/16 inches by 9 7/16 inches inner dimensions.
    • 16 inch film roll stock.
    • 35 inch working height.
    • Maximum 4.75 inch tray depth.

  • y3845z_crop_email.jpgUSDA sanitary food grade construction -- stainless steel side panels & covers with aluminum frame.

  • Modified atmosphere packaging (MAP) option for nitrogen (or other) gas flush and vacuum packing.

  • On-board / integral Busch 5 HP vacuum pump complete with air filter & regulator.

  • Programmable controller.

  • 5 inch caster wheels for off-line mobility.

  • 230/260 volt 3 phase electrical input.

  • Operator Manual included.


As of this writing, this semiautomatic tray sealing machine is in stock at ALARD, in EXCELLENT CONDITION, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food packaging needs.

ALARD item reference #: Y3845

Urschel Model M DICER, Y3875

URSCHEL MODEL M DICER.

y3875t_crop_email.jpg

A used reconditinoed two-dimensional Urschel cutter designed for dicing, strip cutting, or shredding a variety of roducts through a wide range of sizes. This versatile dicing machine, strip-cutter, and shredder is ideally suited for cutting beef, pork, poultry or fish through a wide temperature range from fresh chilled to hot cooked. Also manufacturer recommended as a leafy greens chopper for collard greens, kale, leeks, mustard greens, and spinach. This versatile machine is also recommended for cutting other food products into strips or squares including fruit leathers, flat breads, tortillas, pita chips, brownies, and croutons. This is a high-volume cuttingmachine that operates continuously at high production capacities, and is designed for easy cleanup and maintenance.

Manufacturer SPECIFICATIONs:

  • Infeed thickness of up to 1 inch (25.4mm).

  • Circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm).

  • Crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm).

  • STRIP CUTS can be made by removing the crosscut knive spindle. The length and thickness of the strips will depend on the size of the original product.

  • SHREDS - many types available for applications such as cooked pork, cooked beef, or cooked chicken, in medium, long or fine shreds.


FEATURES:

  • y3875r_crop_email.jpg

    This machine comes set up for 1/4 inch dices. These parts can also be used to cut 1/2 inch dices, or 1/4 inch by 1/2 inch, etc. other cutting parts are available from the manufacturer: --CALL 315-589-4511 to discuss your particular cutting specifications.

  • 10 inch wide feed belt.

  • Includes factory stainless steel operator control panel with safety interlock system.

  • USDA food grade construction, including stainless steel cutting spindles, tubular supportframe, guards, shrouds, infeed hopper and discharge chute.

  • 5HP 230/460 volt 3 phase drive motor with brake.


As of this writing, this refurbished Urschel M DICER is in stock, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting equipment needs.

Alard item reference #:Y3875

Amfec 175 single door VACUUM TUMBLER Y3844

VACUUM TUMBLER, MEAT MARINATOR,
250 lb. capacity, all stainles steel...

Used Amfec Model 175 single door VACUUM TUMBLER, Y3844
from Alard Equipment Corporation.

An AMFEC Model 175 single door vacuum tumbler for marinating beef, chicken, pork and seafood...


FEATURES:

  • y3844x_crop_email.jpg36 inch diameter by 36 inch long drum.

  • Manufacturer rated for 250 pound load capacity.

  • Reverse to discharge with 31 inch discharge height.

  • Manually removable 20 inch diameter loading door with brine loading valve port.

  • All food grade USDA sanitary stainless steel construction.

  • Self contained 2 HP vacuum pump system including filtration canister.

  • Touch screen control panel, with manual and automatic PLC-based controls.

  • Variable frequency drive variable speed controller for 0 - 10 RPM, powered via 1 HP drum drive.

  • Operator Manual included.

  • 230 volt 3 phase electrical input.


As of this writing, this meat marinating vacuum-tumbler is in stock at ALARD, in LIKE NEW condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y3844