A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

July 2015 Archives


y2567m_crop_email.jpgHOT WATER ROTARY BLANCHER, Hughes Model 04-016, with a 60 inch diameter by 16 foot long reel...

...with 1/16th inch perforations, and paddle discharge. USDA food grade sanitary stainless steel construction.

Complete with:

  • Powered cover lift.y2567l_crop_email.jpg
  • CIP spray header.
  • 8 inch diameter top vents.
  • Hinged drum access / cleanout doors.
  • Bottom drains with valves.
  • 10 HP water pump
  • 02 HP main trunnion drive.
  • .5 HP cover lift drive.

As of this writing, this vegetable blancher is in stock at Alard, in very good condition, available for timely shipment.

Alard item reference #:Y2567


y2559j_crop_email.jpgCAN SEAMER, Angelus Model 60L, set for atmospheric closure of 300 diameter cans.

6 foot long straight line infeed table with timing chain and indexing worm at a 36 inch working height. No-can, no-lid mechanism, low lid sensor, complete safety shrouding. 10HP 208/230/460 volt 3 phase variable speed drive.

As of this writing, this can closing machine is in stock at Alard, in very good operational condition, available for timely shipment.

Alard item reference #: Y2559



Manufacturer rated for products measuring up to 3.5 inches (88.9mm) in any dimension. This variant of the Urschel CC model is specifically built for USDA sanitary applications for slicing cheese and other dairy products. Manufacturer offers cutting parts for oval shreds, full shreds, "V" shreds, flat-V shreds, crescent shreds, flat slices, crinkle slices, V-slices, flat-V slices, and Z-slices. The machine can be configured for rectangular cross-section strip cut, as well as for grating of powdered parmesan, and coarse granules. Many different types of products can be sliced/shredded using the Model CC-D for a variety of applications including, but not limited to: shredding cheese for pizza toppings, tacos, or salads; slicing sweet potatoes or other tubers for chips or sticks, shredding potatoes for hash browns, shredding carrots for salad preparations, and slicing of various fruits and vegetables. Please tell your Alard Sales Representative your cutting specifications!

All food grade USDA sanitary stainless steel construction, with conical / cone hopper infeed, factory control panel with safety interlock system, and 5HP motor, with 230/460 volt 3 phase electrical input.

Includes a tubular stainless steel stand apparently intended to position the cutting machine over a tote or barrel; on casters for portability.

As of this writing, this Urschel shredder / slicer is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2761



...a waterfall style slicing machine with four feed tubes over a curved rotating blade spinning at low RPMs. All food grade stainless steel construction, mounted on a tubular stainless steel support frame, to allow for a catch tote or bin to be placed beneath the cutting head.

With each feed tube a different diameter, this vegetable slicer is manufacturer recommended for a range of products including peppers, onions, cucumbers, tomatoes, mushrooms, and even oranges.

Slice thickness is adjustable, and set by the installation of a spacer. As currently configured, this machine is set up for a 40 inch discharge height, between 36 inch wide leg clearance. .5HP 3 phase drive with on / off / emergency stop control box.

As of this writing, this commercial fruit and vegetable slicer is in stock at Alard in very good operational condition (see video). It came in without the feed tubes, which we can fabricate to complete the machine for timely shipment; OR the machine is available as-is for immediate shipment if you want to fabricate infeed tubes yourself.

Alard item reference #:Y1817


y2513k_crop_email.jpgSTAINLESS STEEL INSPECTION CONVEYOR, with 13 foot 3 inch long by 36 inch wide conveyor belt...

...with a clean, white, food grade rubberized belt. All food grade stainless steel construction, including tubular stainless steel frame set for 32 inch working height.

With or without (optional / removable), stainless steely2513c_crop_email.jpg 4-lane lane divider assembly installed.

Complete with 1HP 230/460 volt 3 phase drive.

As of this writing, this inspection and / or sorting table is in stock at Alard, in VERY good operational condition, needing only minor cosmetic cleanup, test run and recommissioning service.

Alard item reference #:Y2513