A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

April 2013 Archives

y1321

y1321c_email.jpg300 GALLON INSULATED STAINLESS STEEL VERTICAL TANK.

Heavily built 48" diameter by 48" deep dish bottom vessel with 4" center bottom outlet with flange connection. The vessel is INSULATED with fiberglass insulation with a white plastic covering. Heavy bolted-on stainless steel top cover with a 16 inch manway, various inlets, clamp mixer mount and agitator slot. 86" overall and infeed height, 30" discharge height on a three leg steel frame painted with "steel-it" metallic paint. Food grade stainless steel construction.

As of this writing, this vertical single-wall food grade stainless steel mix tank is in stock in VERY good condition, available for immediate shipment.

Alard item reference #:Y1321

z8891

VIDEO of Urschel Model L DICER / STRIP CUTTER, strip cutting MANGOES!

A two-dimensional dicer manufacturer recommended for dicing dried fruits, cooked boned and cooled chicken or turkey, raw celery, fresh or brined peppers, cooked mushrooms, orange, lemon, and grapefruit peels, parsley, soaked ginger root, and other products (e.g. mangoes!). Many sizes of dices or strip cuts are made possible by combining various selections of circular knife spacings with different crosscut knife spindles. Urschel offers circular knife spacings from 1/4" to 3", and crosscut knife spindles sized from 1/4" to 4". The original thickness of the original product is one of the dimensions of the finished cut, and infed product should not be more than 1/2" in thickness.


Presently set for 3/8" dices, but other cutting parts may be available; -- please tell us your cutting specification!

Complete with 2HP 208/230/460 volt 3 phase belt drive motor, all stainless steel product contacts, frame, chutes and guards.

As of this writing, this Urschel L cutter is in stock in good condition, available for timely shipment.

Alard item reference #:Z8891

y0449

y0449e_email.jpgWATER AND PRODUCT SPREADER for a 24 inch wide dewatering shaker, for gentle product handling and greater throughput. Slows the flow of water and spreads water and product onto a dewatering device to reduce the chance of product damage, and increase the efficiency of the flume system.

All stainless steel, with an 8 inch inlet flange feeding a 24" long tapered cone, leading to a 90 degree bend, to a 22 inch wide by 8 inch long discharge opening.

Previous owner reconfigured from a bottom feed to a top-side inlet configuration. As of this writing, this pipe flume discharge chute / water reclaim shaker feed chute is in stock in good condition available for immediate shipment.
Alard item reference #:Y0449

y1802

y1802a_email.jpgEDLUND Model 825 AUTOMATIC EXTREME DUTY CROWN PUNCH CAN OPENER, set for #10 cans (603 x 700), complete with lid remover.

Cans fed (i.e. by your existing conveyor) to the infeed trigger a sensor switch when they arrive under the crown, and the machine is activated. An air cylinder pushes the opened cans to the right (from the operator infeed position), where an alligator clip type automatic lid remover takes the lids off the cans prior to discharge, for fast,

safe, high-volume can opening.

Food grade sanitary stainless steel construction, pneumatically powered, complete with plexiglass safety shrouding. 110 volt single phase (standard household current) input required for control circuitry.

As of this writing, this automatic crown punch can opening system is in stock in good condition,  available for timely shipment.
Alard item reference #:Y1802

y1765

y1765q_email.jpgREFURBISHED SAFELINE DIGITAL STAINLESS STEEL CONVEYORIZED WASH-DOWN METAL DETECTOR, with PUSH-OFF REJECT. 10.75 inch high by 5.75 inch wide usable aperture opening in an all stainless steel search head enclosure.

The detection head is mounted on a stainless steel tubular frame through-conveyor with a 5.5 inch wide by 63 inch long solid, flat interlocking plastic chain type / table-top-chain conveyor belt which rides over a UHMW bed,
at a minimum 34" working height on threaded rod adjustable feet. Complete with a pneumatic push-off reject cylinder with a 10 inch by 12 inch catch plate for rejected product, and a factional horsepower conveyor belt motor drive.

All food-grade sanitary stainless steel / washdown construction. Configured for vertical aperture orientation for containers, standing cartons, standing pouches, or other tall-product metal detection. This food process metal detection system has digital operator controls with product presets facilitating fine tuning and quick changeover for multiple products.

The conveyor runs in a left to right product flow from the operator controls position, and the push-off goes from left to right from the perspective of one standing at the infeed looking toward the discharge. Complete with side-mounted digital touchpad operator control panel with frame-mounted stainless steel power supply box.

110 volt single phase (standard household current) electrical inputs for detection head and conveyor drive. Compressed air required to power the reject-pusher.

As of this writing, this reconditioned Safeline rectangular aperture metal detector is in stock in EXCELLENT  operational, electrical, mechanical and cosmetic condition, ready to go and available for immediate shipment.
Alard item reference #: Y1765

y1662

y1662e_email.jpgHOT WATER ROTARY BLANCHER, 40 inch diameter by 8 foot long reel, all stainless steel, USDA food-grade sanitary, with in-tank steam coils...

...A.K. ROBINS Model AK-40 blancher with 40 inch diameter by 96 inch long blancher reel, enclosed by a perforated screen with fine 1/16" diameter screen perforations. The reel has screen access ports into the reel / auger for sanitation. Top cover with hinged doors on either side, with (2) top vent ports, and side-mounted water overflow tank. 18 inch wide by 20 inch long hopper infeed, perforated paddle-wheel type discharge. Sits on a 3 inch tubular steel frame, currently configured for a 79.5 inch infeed height, and a 51.5 inch discharge height.

The blancher tank is fitted with 2" diameter full length / multi-pass stainless steel steam coils to heat tank water, has 12 inch bottom end cleanouts on both ends of the tank, and a 4 inch threaded bottom tank drain port on each end.

Complete with a 1 HP 208/230/460 volt 3 phase washdown gearmotor drive.

Last ran pasta in USDA facility. As of this writing, this stainless steel rice blancher / pasta blancher / vegetable blancher is in stock in good condition,
available for timely shipment.

Alard item reference #:Y1662

y1584

y1584a_email.jpgGROTE FRESH PRODUCE SLICER, Model FPS-1000 "Accuband" slicing machine, manufacturer rated for clean and even cuts of delicate tomatoes, rigid onions, or "most fruits and vegetables" at up to 120 strokes per minute across a 30 inch wide slicing zone; and as crank adjustable for slicing thickness up to 1.5 inch (38.1 mm).

This continuous band slicing machine is configured with (6) vertical feed tubes, consisting of (2) 3 5/8 inch diameter tube, (2) 4-inch diameter tubes, a 4.5 inch diameter tube, and a 4 7/8" diameter tube.

Food grade sanitary stainless steel construction, easy to clean, open bottom
y1584c_email.jpg discharge to drop onto your existing conveyor (or we can provide one, separately). Complete with 208/230 volt 3 phase drive.

As of this writing, this continuous onion slicer / tomato slicer / fruit and vegetable slicer is in stock in very good condition, available for timely shipment.
Alard item reference #:Y1584

y1583

y1583_email.jpgKEY Hydroflo FOOD PUMP, 6-inch, with stainless steel feed tank, 5HP drive...

...consists of a cast iron Cornell Model 6NHPP-F16K expanded volute food pump, mounted together on a tubular stainless steel frame with a 5HP 208/230/460 volt drive. The pump mates by flange coupling with a tapered bottom, open top stainless steel infeed tank 2 feet wide by 3 feet long by 2 feet deep, with 6 inch flanged ports.

Per manufacturer literature, rated for 4,000 lbs (1,814 kg) to 160,000 lbs  (72,575 kg) per hour throughput, depending on product and flume system configuration characteristics. Pump curves available upon request.

Conveying product by water transport utilizes water to support and cushion the product being handled, can can easily be used to heat or chill product, and or apply preservatives or disinfectant sanitizers, and wash / rinse sanitize during transport. Hydro transfer allows product to be conveyed vertically, horizontally, or both in the same system, with great space-saving potential (more compact than a conveyor, and can be used to transport product along ceilings or other underutilized areas). Replaces belt conveyors for many applications, with easy upkeep, long transport distance capability (several hundred feet possible), gentle handling, and multiple process capability (heating or cooling, washing, sanitizing, etc).

As of this writing, this hydro-transport water-conveyor / flume pump system is in stock, needing cosmetic cleanup and routine recommissioning / maintenance services (presumably gaskets, possibly drive bearings) as-is for immediate shipment, or with a reasonable lead time, can be serviced in our shop to excellent operational, mechanical and cosmetic condition for timely shipment.

Alard item reference #:Y1583

y1771

y1771f_email.jpgURSCHEL Model CC SLICER with stainless steel slice shell and 5-blade impeller, with Urschel "potato-hopper" infeed, stainless steel control box with interlock safety switches. Complete with stainless steel shrouding, and tubular stainless steel support frame. Includes an Allen Bradley stainless steel electrical control box with lock-out, and safety interlock system with safety switches on hopper and blade-shroud, controlling the 5HP 3 phase drive.

Available with, or without op
tional tubular stainless steel riser stand which raises this CC shredder to a 56  inch infeed height, and 28 inch discharge height.

Manufactuer rated for grating, flat slices, crinkle slices, V-slices, oval shreds, crescent shreds, full shreds, match-stick cuts, and strip cuts in various dimensions; --please tell us your cutting specification.

As of this writing, this Urschel CC shredder, slicer, strip cutter, is in stock
in very good condition, available for timely shipment.
Alard item reference #:Y1771

y1772

y1772c_email.jpgWATERFALL CUTTER, 20 INCH DIAMETER cutting disk, for slaw, sauerkraut, sandwich and salad lettuce, and other high-volume vegetable shredding and slicing applications; manufacturer rated from a few hundred pounds per hour up to a few tons per hour throughput capacity  (depending on product, feed method, and cut).

A wide range of blade and cutting disk configurations are available for different products and cutting specifications, in single (slice) and two-dimensional (strip cuts), as well as shred cuts.

Stainless steel construction including support frame and all product contact surfaces. 20" diameter cutting disk with dual fixed curved plows. Fractional horsepower 110 volt (standard household current) single phase drive motor.

Currently configured for a 51" infeed height, and a 38" discharge height from a nice slide-out-to-clean stainless steel underside discharge chute.  The shredder sits on a tubular stainless steel stand open at the sides for convenient placement of a tote or bin to catch the cut product.

As of this writing, this cabbage cutter / leafy vegetable cutter is in stock in good condition and available for timely shipment.
Alard item reference #: Y1772


y0749

y0749_ccc_cut_sheet_email.jpgMETAL-BOX Model MB-6 VACUUM CAN SEAMER, set 401 diameter by 311 high. Complete with random disk infeed, single seaming head, marker, 3HP 3 phase motordrive.

Built under license from Canco, this machine is a "clone" of the well-known and widely used Canco 006 can seamer, and uses the same change parts.

As of this writing, this MetalBox MB6 can closer is in stock complete, and in good condition, needing cosmetic cleanup.
Alard item reference #: Y0749

y1014

y1014c_crop_email.jpgWAUKESHA Universal 60 STAINLESS STEEL POSITIVE DISPLACEMENT LOBE PUMP with 3 HORSEPOWER DRIVE.

Complete with 2.5 inch Tri-clamp connections; mounted on a stainless steel base coupled with a 5HP 208/230/460 volt 3 phase drive.

This food grade Waukesha USDA sanitary stainless steel pump is in stock in EXCELLENT operational, mechanical, electrical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y1014

y1629


y1629c_crop_email.jpgWAUKESHA Universal 60 STAINLESS STEEL POSITIVE DISPLACEMENT LOBE PUMP with 1 HORSEPOWER DRIVE.

...with 2.5 inch Tri-clamp connections; mounted on a stainless steel base coupled with a 1HP 208/230/460 volt 3 phase drive.

This food grade Waukesha USDA sanitary stainless steel pump is in stock in in very good operable condition, available for timely shipment.

Alard item reference #:Y1629

About this Archive

This page is an archive of entries from April 2013 listed from newest to oldest.

March 2013 is the previous archive.

May 2013 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)