A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

March 2017 Archives

Mueller 4x8 FALLING FILM PLATE CHILLER, stainless steel (6) plates, Alard item Y2099

Paul Mueller Model 361-IFC
stainless steel
(6) plate FALLING FILM PLATE CHILLER...


y2099m_crop_email.jpgA six-plate laminar flow plate chiller for cooling free-flowing food grade liquids that will become an ingredient in a food product, or will come into contact with a food product; including potable water, fruit juices, and food wash water, rinse water and chiller flume water...

  • y2099p_crop_email.jpg(6) 45 inch by 96 inch all stainless steel chill plates in an eight plate sized stainless steel cabinet (though the drizzle pans are sized for six plates only).

  • All food grade sanitary stainless steel construction.

  • Top distruibution pan distributes water evenly over the plates in a laminar flow.

  • Chilled water or juice falls from the chiller plates into an insulated stainless steel bottom collection tank (293 gallons capacity).

  • Manufacturer tagged for up to 250 psi working pressure (chill plates), and for cooling any free-flowing food fluid to within 2 degrees F of its freeze point.

  • Hinged front access door.


As of this writing, this food grade liquid plate chiller is in stock at Alard, in very good condition, available for immediate shipment.

Alard item reference #:Y2099

REFURBISHED 4-roll PEELER-WASHER, stainless steel, Alard item Y1075

4 ROLL
CONTINUOUS PEELER-WASHER-SCRUBBER,
stainless steel...

y1075q_crop_email.jpgA REFURBISHED continuous four roll abrasive peeler / brush washer for industrial food processing of fruit and vegetable products.

  • Tapered 15 inch by 26 inch infeed chute to the peeling chamber.

  • Currently configured with (4) 6 inch diameter by 6 foot long abrasive rolls for root crop vegetable peeling applications, but the abrasive rolls can be interchanged and/or alternated with scrubbing brushes or nub rolls, depending on product and process requirements; --CALL 315-589-4511 to discuss the details of your process requirements for a quote on the specific configuration you need!

  • Adjustable discharge gate for product retention control.

  • Stainless steel water spray header w/(6) bronze nozzles to remove peels and debris.

  • Underside collection pan with center bottom outlet opening.

  • Central lubrication cluster.

  • Rated up to 2,000 lbs (1 ton) per hour nominal capacity, depending on product and process (peeling, scrubbing, washing, finishing)...

  • Food grade stainless steel construction, including frame.

  • Electric-powered with chain-and-sprocket drive system, 3HP 208/230/460 volt 3 phase fixed speed drive (variable frequency drive available as an option; CALL 315-589-4511 for more).


As of this writing, this four roll peeler-washer is in stock, reconditioned to EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y1075

Douglas RBW-74 ROTARY lug, tote and tray WASHER, Y3146

DOUGLAS RBW-74
ROTARY BATCH WASHER,
LUG WASHER, TOTE WASHER, TRAY WASHER...

y3146r_crop_email.jpgManufactuer recommended to wash and sanitize process transfer containers such as totes, lugs, trays, pans, and the like, typically used in the bakery, meat, poultry, candy, and food service industries...

Last used in a meat processing plant for washing and sterilizing meat lugs / meat totes. This make / model machine is widely used in bakeries, supermarkets, food processing plants, commissaries, restaurants, hotels and institutional food preparation kitchens.

THIS machine FEATURES...

  • y3146_crop_email.jpg  "CAROUSEL" container handling change parts (as shown in pictures) for washing 43.5 inch long by 26.5 inch wide by 11.5 inch deep totes, that look very similar in size and shape to household recycling bins (see pictures); --this carousel holds 3 lugs per batch.

    • Other change parts / carousels are available for other types and sizes of totes / lugs / trays. Containers for which change parts are available include those for washing sheet pans, muffin pans, cake pans,lugs, totes, baskets, candy molds, trays, untensils, buckets, machine parts, and mixing bowls up to 140 quarts; --call 315-589-4511 to discuss the details of your tote washing need.

  •  The washer is loaded and unloaded via a space saving front-side lift door.

  • Totes / lugs /trays are manually loaded face down onto a 74 inch diameter rotating stainless steel turn-table, or onto specially designed racks on the carousel, that passes them through  a series of strategically located spray nozzles for 360 degree exposure of each container to high pressure spray from a variety of angles to cut and remove stubborn soils and baked on foods.

  • Integral 125 gallon recirculating detergent wash tank.

  • Top mounted (currently removed for shipment) fresh water sanitizing rinse  tank.

  • Includes optional steam exhaust fan to help clear excess steam after final  rinse cycle.

  • Short, medium, or long wash sequence depending on soil conditions.

  • Each cycle is followed by a 30 second hot water, sanitizing rinse, with rinse water routed bck into the wash tank for reuse and to help freshen it.

  • Filter screens collect debris, and keep the nozzles from clogging.

  • STEAM HEATED, with steam coils for both wash and rinse tank, each tagged for 125 psi working pressure.

  • 20HP water recirculation pump to power the high-velocity V-jet wash nozzles.

  • Food grade all stainless steel construction.

  • Stainless steel operator control panel, with moisture resistant gauges measuring wash temperature, wash pressure, and rinse temperature.


As of this writing, this rotary lug and tote washer is in stock at Alard in very good condition, available for immediate shipment.

Alard item reference #: Y3146

Gravity free-fall METAL DETECTOR with reject, 6 inch, stainless steel, Alard item Y3360

GRAVITY FLOW METAL DETECTOR
with reject diverter,
6 inch diameter, food grade stainless steel...

y3360_backlit_a_crop_email.jpg
PLEASE NOTE: that the picture shows this metal detector and control panel sitting on top of an OPTIONAL frame with casters that we use for showroom display purposes, and is not included with this metal detector, but is available separately (CALL us at 315-589-4511 for a quote specific to your metal detection requirements).

A CASSEL METALSHARK 2 model GFS-150-RV drop-through metal detector for industrial manufacturing and packaging process applications, FEATURING...

  • THRU-TUBE: 6 inch diameter by 24 inch long anti-static plastic through-tube with stainless steel end connections.

  • MOUNTING FRAME: The metal detection search head enclosure comes mounted inside a 19 5/8 inch wide by 16 5/8 inch long by 20 inch high tubular stainless steel frame, with angle cross pieces for mounting in place as needed to support your product inspection application / usage. PLEASE NOTE that the pictures show this metal detector and control panel sitting on top of an OPTIONAL frame with casters that we use for showroom display purposes, and is not included with this metal detector, but is available separately (CALL us at 315-589-4511 for a quote specific to your metal detection requirements).

  • REJECT DIVERTER: Stainless steel high speed pneumatic Y-valve reject valve, with 6 inch diameter discharge outlets; 35 inch free-fall from inlet to bottom discharge with reject diverter in place.

  • CONTROL PANEL: Touchpad operator control panel connected by 6 foot long cord so as to facilitate mounting for convenient access, with a 5.4 inch color screen, RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a T316  stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • FOOD GRADE SANITARY: A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel onstruction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).
  • UTILITIES: 110 volt single phase (standard household current) electrical input. Compressed air pneumatic line also required to operate reject valve.

  • SENSITIVITY: Metal detection sensitivity varies depending on product run (determined by product  characteristics), especially where wet, salty, or acidic products that are electrically conductive introduce "product  effect" into the equation, however the manufacturer rates dry sensitivity for this head, with no product in the aperture, at a maximum sensitivity of .8mm ferrous, 1.1 mm non ferrous, and 1.3mm stainless steel.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets.

  • EASE OF MAINTENANCE: Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • T316 stainless steel construction: T316 stainless steel is an extremely high-grade of stainless, more corrosion resistant than standard 304 type stainless steel, and suitable even in corrosive process environments, such as in processing onions, peppers, brines, tomatoes, citrus products, etc.
     
  • NEW EQUIPMENT -  Includes a 2 year manufacturer warranty on hardware / parts.


Gravity free-fall metal detection systems are commonly used for free-flowing granular and / or particulate products, as well as sliced, diced, shredded and whole products in food manufacturing and other industrial production applications. Gravity flow metal detectors are commonly mounted under feed hoppers, under mixer / blender discharges, or on filling machines, such as for metal-checking between scales and form-fill-seal or other types of baggers.

As of this writing, this NEW industrial process gravity free-fall metal detector is in stock NEW at Alard, available for immediate shipment. Call your Alard Sales Representative at 315-589-4511 to confirm current availability, and to dicuss the details of your metal detection system needs.

Alard Reference #Y3360

HYDROSTATIC STEAM BLANCHER, 20x48 belt, stainless steel, Alard item Y3120

 

BELT TRANSFER HYDROSTATIC BLANCHER, 20 x 48, stainless steel.

y3120n_crop_email.jpg

An industrial food process continuous steam blanching machine for tons-per-hour production in a food manufacturing plant operation, this Meyer / Garoutte steam belt blancher features...

  •   20 foot long by 48 inch wide belt.

  • Stainless steel LaPorte type belt with 1/2 inch by 3/8 inch openings, ideal  for maximum steam penetration, for cooking whole vegetable.

  • Stainless steel steam headers over and under the belt.

  • Powered, ferris-wheel type infeed and discharge valves.

  • Insulated, powered screw lift top cover, lowers into water seal channel.

  • Hydraulic driven, includes hydraulic power pack.

  • Food grade stainless steel product contacts.


As of this writing, this belt steam blancher for vegetables is in stock at Alard, in good servicable condition, available for timely shipment.

Alard item reference #:Y3120

Food Grade METAL DETECTOR with conveyor, 21x8, Alard item Y3359

FOOD PROCESS METAL DETECTOR with BELT CONVEYOR, 21x8, 316T stainless steel...

 

y3359_backlit_crop_email.jpg

A Cassell Metalshark2 MULTI-FREQUENCY washdown sealed T316 stainless steel conveyorized metal detection system for industrial process applications, with...

  • 7 7/8 inch (200mm) high by 20 5/8 inch (524mm) wide net USEABLE aperture opening with the conveyor belt in place...

  • The T316 stainless steel frame washdown belt transfer conveyor has a 71.5 inch (1816mm) long by 18/5 inch (470mm) wide interlocking plastic chain type  belt, running at a 31.5 inch (800mm) working height, with adjustable feet allowing +/- 4 inch (100mm) height adjustment.

  • The thru-conveyor is complete with a  belt-stop alarm reject configuration, and a variable frequency speed control for the 110 volt single phase drive, adjustable from 16 to 75 feet per minute  (approximately 90 to 500 centimeters per minute) belt speed.

  • A food grade metal detector specifically built for food processing and other industrial production line metal detection applications. All food grade / USDA sanitary hose-wash-down stainless steel construction (IP-67/NEMA 6 search head enclosure, IP-65/Nema4,4x,6,12 & 13 control enclosure).

  • The search head is complete with integral touchpad operator controls with a 5.4 inch color screen, including RS-232 and RS-485 serial data acquisition ports, and ethernet data interface, in a T316  stainless steel enclosure. Optional data logging software is available for tracking and reporting for HACCP and other quality assurance and certification regimes.

  • 110 volt single phase (standard household current) electrical input.

  • FOUR FREQUENCY LEVELS (35kHz, 75kHz, 150kHz, and 300kHz), allowing for optimal sensitivity across an exceptionally wide range of products / product types (wet, dry, salty, meat, fruits, vegetables, fresh, frozen, hot, cold, etc) allowing for maximum versatility with the widest range of products. The optimal frequency is automatically set by the system in "product learn"mode to maximize sensitivity / minimize false rejects with your specific product.

  • Sensitivity varies depending on product run, and frequency setting (determinedby product  characteristics), especially where wet, salty, or acidic products that are electrically con ductive introduce "product  effect" into the equation.

  • Quick teach feature learns new products in 4 to 7 passes.

  • The control unit allows for 120 product presets, where product presets save the frequency setting with the other tuning data.

  • Single control board technology with all control electronics on one circuit board maximizes reliability, and minimizes maintenance expenses.

  • T316 stainless steel search head and conveyor construction. T316 stainless steel is an extremely high-grade of stainless, more corrosion resistant than standard 304 type stainless steel, and suitable even in corrosive process environments, such as in processing onions, peppers, brines, tomatoes, citrus products, etc.

  • NEW EQUIPMENT -  Includes a 2 year manufacturer warranty on hardware / parts.


Alard generally keeps at least one of this make / model / configuration in stock at Alard on an ongoing basis so as to have one available for immediate shipment: Call your Alard Sales Representative at 315-589-4511 to confirm current
availability.


Alard item reference #:Y3359

Granular and particulate food WEIGH FILLER, Y0738

 

WEIGHPACK THREE LANE LINEAR SCALE / NETWEIGH FILLER.

Triple lane auto weigher linear weigher, net-weigh filling machine for granular and particulate food products, with vibratory bulk and dribble feed for speed and accuracy in filling by weight...


 

FEATURING...
 

  • NEW electronic control system with...
    •  GSE / Weightronix model 663 Process Controller programmable system  control panel, with touch pad controller and LCD display.
    • New Syntron vibratory feed controllers.
    • The operator controls and the vibrating controllers are each in gasketed stainless steel control boxes.

  • 33 inch wide by 15 inch long stainless steel top infeed hopper, tapering to three separate discharges with adjustable gates to feed each lane.

  • Hopper feeds first stage vibrating even-feed pans to vibratory bulk and  dribble pans, to weigh cells, to discharge chute.

  • Weigh buckets are 1 quart volume.

  • Weigh cells manufacturer rated for .5 ounce to 10 lb fills.

  • Single outlet stainless steel discharge chute with 4" diameter spout.

  •  A food grade stainless steel scaling system for particulate and granular food products.

  • An all stainless steel weigher on a painted steel base
  • The scale is mounted on a tubular stainless steel support frame, set for an 8 foot 1 inch infeed height, and 33.5 inch discharge height on leveling foot pads.

  • Currently configured for semiautomatic, foot-switch activation.

As of this writing, this multi-lane weigher is in stock at Alard, in LIKE NEW condition, available for immediate shipment.

Alard item reference #:Y0738

TORTILLA PRODUCTION LINE, Y3505

TORTILLA LINE...

A late model tortilla line in excellent to like new condition, for production of flour and corn tortillas...

INCLUDING:


  • y3426b_crop_email.jpgSPIRAL DOUGH MIXER, 80 kg, Empire Bakery Equipment / Logiudice Forni, Alard item Y3426
    Click on picture to enlarge!






  • y3427c_crop_email.jpgDOUGH DIVIDER-ROUNDER, AUTOMATIC, Vitella Model SPA-TA-36, Alard item Y3427
    Click on picture to enlarge!












  • y3423b_crop_email.jpgMASA FEEDER EXTRUDER, Superior Model HDMF6-2, Alard item Y3423.
    Click on picture to enlarge!












  • y3424b_crop_email.jpgTORTILLA OVEN, Superior model 2C072-42-5P, with presses for flour (dough) and corn (masa) cutter, Alard item Y3424.
    Click on picture to enlarge!


  • y3425c_crop_email.jpgTORTILLA COOLING CONVEYOR, Superior model 51810 INEQ, 5 level, 18 inch wide belt, 14 feet long, all stainless steel, Alard item Y3425.
    Click on picture to enlarge!


As of this writing, this tortilla production line is in stock at Alard, in EXCELLENT to like new condition, available for immediate shipment.

 

Alard item reference #: Y3505

Urschel RA-A VIDEO DEMO cutting olives, dried tomatoets, jalapenos Y2332

URSCHEL RA-A DICER VIDEO DEMO...

An Urschel model RA-A cutting machine dicing olives, sundried tomatoes, and jalapeno peppers, set for 1/4 dices. Other cutting setups are available (CALL 315-589-4511 to discuss your cutting specifications!).

 


As of this writing, this machine is in stock at Alard, in very good operational condition, available for immediate shipment; or can be further reconditoined to excellent mechanical and cosmetic condition at extra charge, for timely shipment.

Alard item reference #:Y2332

Food process METAL DETECTOR with belt conveyor, 40x6 opening, all stainless steel, Alard item Y3460

FORTRESS PHANTOM "BSH" FOOD METAL DETECTOR with BELT TRANSFER CONVEYOR, 40x6, stainless steel...



y3460_crop_email.jpgA Fortress Phantom BSH industrial process metal detector we acquired in the unopened factory crate, never used, on a newly fabricated belt transfer conveyor. This is an industrial process product inspection system for detecting metal contamination in food products, and in other industrial process environment.


y3460h_crop_email.jpg

FEATURES...

  • 5 5/8 inch high by 40 inch wide USABLE aperture opening.

  • Super stable filled head with epoxy liner.

  • Stainless steel search head enclosure.

  • Wash-down grade epoxy sealed liner and water-resistant search head enclosure, for wet environment wet product applications, such as fresh produce / freshcut fruit and vegetable packing, and other industrial process applications.

  • Complete with integral, digital touchpad controls with multifarious product presets.

  • NEW STAINLESS STEEL CONVEYOR with 84 inch long by 38 inch wide interlocking plastic belt.

  • Integrated belt-stop alarm REJECT system, with new gasketed PVC control box.

  • New 1/2 HP conveyor belt drive with VARIABLE SPEED controller.

  • 110 volt single phase (standard household current) electrical input.

  • NEW / UNused condition, with 1 year parts and labor warranty.


As of this writing, this food process metal detection system is in stock in NEW / UNused condition at Alard, with 1 year parts and labor warranty, available for immediate shipment. CALL 315-589-4511 to confirm current availabilty and discuss your specific metal detection needs!

Alard item reference #:Y3460

600 gallon jacketed PROCESS TANK with SCRAPER AGITATOR, Y2650

600 GALLON JACKETED PROCESS TANK with SCRAPER AGITATOR.

y2650b_crop_email.jpgA food grade / dairy grade 600 gallon vertical stainless steel mix tank  configured with...

  • 63 inch diameter by 54inch deep vessel with dome top, and cone bottom.

  • Dual zone (bottom and side) steam jacket(s).

  • Top mounted scrape-surface agitator with 3HP gear motor drive geared for 20  RPM at the agitator blades, with stationary top mounted mixing baffle.

  • 19 inch diameter hinged cover manway, and several top inlets in dome top.

  • 4 inch center outlet with threaded connection. Thermowell ports in bottom.

  • 80 inch infeed height, 20 inch discharge height, mounted on a (4) stainless steel leg frame.

  • This tank is not tagged for pressure, but both jacket zones have been hydrostatically pressure tested to confirm no leaks.


As of this writing, this 600 gallon process tank with side and bottom scrape agitation is in stock at Alard, in very good condition, available for timely shipment.

Alard item reference #:Y2650

600 gallon process TANK with sweep agitation, Y2651

600 GALLON JACKETED PROCESS TANK with SWEEP AGITATOR.

y2651f_crop_email.jpgA food grade / dairy grade St. Regis Crepaco 600 gallon vertical stainless steel mix tank configured with...

  • 72 inch diameter by 36 inch deep vessel with dome top, and sloped bottom.

  • Dual zone (bottom and side) steam jacket manufacturer tagged for 75 psi working pressure.

  • Top mounted full sweep agitator with gear motor drive geared for 20 RPM at the agitator blades, with stationary top mounted mixing baffle.

  • 18 inch diameter hinged cover manway and several top inlets in dome top.

  • 3 inch bottom side outlet with Tri-clamp connection. Thermowell ports inside wall.

  • 81 inch infeed height, 35 inch discharge height, mounted on (4) stainless steel legs.

  • Both jacket zones have been hydrostatically pressure tested to confirm no leaks.


As of this writing, this 600 gallon process tank with sweep agitation is in stock at Alard, in very good condition, available for timely shipment.

Alard item reference #:Y2651

Food grade METAL DETECTOR with ACCUMULATING DISK, Y3414

FOOD METAL DETECTOR with BELT CONVEYOR, 14x6, with ACCUMULATION DISK discharge.

y3414n_crop_email.jpg

A LOMA IQ2 stainless steel digital industrial food process metal detector with a thru-conveyor leading to an accumulating pack-off turntable...

  • 5 7/8 inch high by 13 3/4 inch wide net usable aperture opening with conveyor belt in place.

  • Stainless steel belt transfer through-conveyor with a 60 inch long by 12 inch wide solid plastic interlocking chain type conveyor belt running over an anti-static UHMW plastic bed at a 36 inch working height on adjustable foot pads.

  • Tubular stainless steel conveyor frame.

  • Right to left product flow from operator controls position.

  • Integrated belt stop alarm reject system.

  • The conveyor feeds to an attached 48 inch diameter food grade stainless steel accumulation disk at a 33 inch high working height, with underside support wheels reinforcing the outer edges of the disk.

  • Food grade stainless steel construction for food industry metal detection.

  • Touch pad digital operator control panel integral to metal detector.

  • Gasketed stainless steel control box for conveyor drive / reject system / and accumulator disk drive.

Electrical:

  • 110 volt single phase (standard household current) electrical input for both conveyor and metal detection head.
  • 208/230v 3 phase accumulation disk drive, with variable speed control.


As of this writing, this refurbished food process metal detection system is in stock in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y3414

SORTING and INSPECTION CONVEYOR, stainless steel, 3 lane, 16 feet long by 38 inch wide, Y3417

FOOD GRADE STAINLESS STEEL INSPECTION AND SORTING CONVEYOR, 3 LANE, 16 feet  long by 38 inch wide belt...

y3417p_crop_email.jpgA LIKE NEW Palcon inspection conveyor, trim line, coring conveyor, with...

  • 38 inch wide by 196 inch long solid interlocking plastic chain type belt.

  • 9.5 inch wide by 168 inch long high-density plastic cutting board surfaces on each side of the conveyor, providing room for 10 to 12 work stations. These trim line and coring countertops can be folded down out of the way when not in use.

  • The conveyor belt is separated into 3 lanes by 7.5" high  stainless steel dividers.

  • The 14 inch center lane has gates diverting products to the outside lanes for inspection and sorting, and this center lane was previously used as a good product takeaway (or the gate can be raised to pass product through).

  • y3417j_crop_email.jpgThe two 12 inch wide outside lanes have "dam gates" at the discharge end to prevent unsorted product from being discharged (or the gates can be opened to allow product to pass through).

  • All food grade sanitary stainless steel construction.

  • 208/230 volt 3 phase variable speed drive.

  • Includes stand-alone tote filling table which can be placed at the discharge.


AVAILABLE OPTIONS:

  • Pictures show optional (NOT included) QUARTERING CUTTER for cabbage, lettuce, melons, etc; --available as of this writing as Alard item Y3447. CALL 315-589-4511 for current availability.

  • Previously used fresh produce processing line, this trim line / coring line was formerly mated with and fed by an OPTIONAL roller washer and feed conveyor, avalable as of this writing as Alard item Y3416.  CALL 315-589-4511 for current availability.


As of this writing, this like new 10 or 12 person trimming and coring belt conveyor is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, available for immediate shipment.

Alard reference #:Y3417

ROLLER INSPECTION TABLE / PRODUCE WASHER Alard item Y3416

PALCON ROLLER INSPECTION CONVEYOR / PRODUCE WASHER, 33 inches wide by 15 feet long for industrial fruit and vegetable processing...

y3416r_crop_email.jpgA roller conveyor with open roller inspection infeed section, wash / rinse tunnel and air blast drying section...

  • 33 inch wide by 14 foot long roller conveyor with 1 5/8 inch diameter PVC rollers, with a 3/8 inch gap between rollers.

  • Tapered infeed hopper extends one foot beyond the roller conveyor.

  • 5 foot long open inspection section (including hopper).

  • 6 foot long spray tunnel w 12 inch high product clearance, under 4 rows of stainless steel spray headers, each with 10 stainless steel nozzles. Spray tunnel has hinged top hood for easy maintenance and cleaning access.

  • y3416w_crop_email.jpg3 foot long air blast drying section, with three stainless steel air knives over the open discharge section. Comes complete with blower fan.

  • Full length stainless steel center lane divider and 3 inch high stainless steel conveyor sides.

  • Full length bottom water catch pan beneath roller conveyor, plumbed to a 47 inch long by 24.5 inch wide by 15.25 inch deep water recirculation tank with (3) screens, (2) floats, 2.75 inch inlet and outlet, and 1.25 inch  diameter overflow.

  • Recirculation pump included.

  • Complete with stainless steel control box with operator control switches and variable speed controls.

  • 38.5 inch infeed height, 43 discharge height: Shallow conveyor incline  configured to feed onto (OPTIONAL) belt inspection (trim, quartering, coring) conveyor (Alard item Y3417) available separately: CALL 315-589-4511 for current availability of the pair.

  • New 2013, previously used as a bulk product infeed conveyor for washing fruit and vegetable products at the very beginnning of a fresh produce processing and packing line.


As of this writing, this late model food grade stainless steel roller inspection table with spray tunnel and air blast drying section is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y3416

OHLSON 2L2-SS LINEAR WEIGHER, Alard item Y2814

OHLSON MODEL 2L2-SS LINEAR WEIGHER food grade stainless steel netweigh filler.

y2814ar_crop_email.jpgOhlson 2L2SS TWO-LANE LINEAR SCALE, bulk and dribble vibratory filler / feeder, for filling and feeding dry, granular and free flowing particulate food products
 / ingredients by weight. This machine is configured with...

  • Two lanes with two scales, manufacturer rated for 22 lb capacity per scale.

  • Manufacturer rated for up to 30 weighs per minute, with timing adjustable to allow for double-stroke fills up to 44 lbs, and approximately 7 ounce minimum weigh capability per scale.


  • Bulk system infeed hopper 8 inch wide by 38 inch long with inverted "V" center anti-bridging diverter, over vibrating flat trough 12 inches deep by 15 inches wide by 48 inches long.


  • Scale feed section hopper 17.5 inches wide by 17.5 inches long at a  77 inch infeed height, with a center "V" divider separating the product flow to two, two-lane, flat bottomed bulk and dribble feed pans, each with two 5.5 inch deep by 5.5 inch wide by 22 inch long lanes with shutoff flaps for each lane at the discharge (two pans with four lanes each with flap).

  • Dual weigh scale buckets each 9 inches long by 12 inches wide and tapering from 7 to 9 inches deep, drop into individual chutes that drop into individual discharge spouts tapering to 3.5 inches wide. Each weigh bucket has it's own individual weighcell.

  • Discharges could be combined into a single discharge outlet.

  • Manufacturer rated for scale accuracy (+/-) .5-1 gram.

  • 6 inch touch screen operator control interface, with multiple preset programs with PLC.

  • 110 volt single phase (standard household current) 7 amp electrical input.

  • Pneumatically actuated lane flaps and weigh-bucket doors require compressed air 1 cfm @ 60psi.

  • 110 inch infeed height to bulk feed hopper, 19.5 inch discharge height from discharge spouts.

  • All food grade stainless steel product contacts and support frame.


As of this writing, this dual lane bulk and dribble linear scale netweigh filling machine is in stock at Alard, in good condition, available for timely shipment.

Alard item reference #: Y2814

Turbulent flow vegetable wash flume and plate chiller, Y3420, Y3422

 

TURBULENT FLOW / HELICAL
FRUIT & VEGETABLE WASHER
(Alard item Y3420)
and
3x5 FOUR PLATE WATER CHILLER
(Alard item Y3422),
all stainless steel...


Available separately, or as a mated system...

  • NORTH STAR ENGINEERED PRODUCT (NSEP) HW3800 HELICAL WASH SYSTEM manufacturer recommended for washing a wide variety of cut and whole product with a maximum wash path in a small space. This water jetted wash flume is particularly well suited for washing and sanitizing / sterilizing fresh produce, precut produce, and in other fresh cut food  processing, including leafy vegetable products such as lettuce, romaine, spinach, celery, and other industrial fruit and vegetable washing applications. (Alard item Y3420)


    y3420_y3422o_crop_email.jpg 
  • MUELLER 3x5 FALLING FILM PLATE CHILLER - A Paul Mueller Model 165-FFC stainless steel (4) plate chiller, for cooling free-flowing food grade liquids that will become an ingredient in a food product, or will come into contact with a food product; including potable water, fruit juices, and food wash water, rinse water and chiller flume water. (Alard item Y3422)

    y3420_y3422_crop_email.jpg

As of this writing, this turbulent flow VEGETABLE WASHER, and laminar flow PLATE CHILLER, just arrived here at Alard, and both are late model (2015) like new pieces in EXCELLENT condition, available for timely shipment...


Alard Item reference #Y3420 (fruit and vegetable WASHER) and #Y3422 (four-plate CHILLER).

 

Urschel J DICER and GREENS CHOPPER Alard Y3380

Reconditioned Urschel model J DICER / STRIP CUTTER / GREENS CHOPPER...

y3380k_crop_email.jpgA two dimensional cutting machine for industrial food processing applications, manufacturer recommended for food products up to 1/2 inch (13mm) thick at infeed, such as spinach and greens, pepppers, citrus peel, celery, b roccoli, and parsley.

Manufacturer literature specifies this model for cutting square or rectangular dices, with...

  • Circular knives that can be spaced for cuts from 3/16 inch (4.763mm) to 3inches (76mm), and...

 

  • a selection of crosscut spindles available for cuts from 1/4  inch (6.35mm) to 3 inches (76mm).

  • Strip cuts can be made by removing the crosscut knife spindle from the machine, with the length and thickness of the strips depending on the size of the original product.


This machine features...

  • Urschel factory original safety interlock system with factory control box, which disconnects power to the machine if safety guards are removed.

  • 9 inch wide feed belt and cutting spindles.

  • Food grade stainless steel product contact surfaces, stainless steel tubular support frame, guards, shrouds and discharge chute.

  • Most standard cut sizes are available CALL 315-589-4511 to discuss YOUR cutting specification.

  • 5HP 3 phase drive motor.


As of this writing, this reconditioned Urschel J dicer / strip cutter / greens chopper is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with selected cutting spindles (CALL 315-589-4511 to tell us your cutting requirements) prior to shipment.

Alard item reference #:Y3380

COMBINATION Metal Detector Checkweigher, Y3385

CHECKWEIGHER and METAL DETECTOR COMBINATION FOOD PRODUCT INSPECTION SYSTEM...

y3385a_crop_email.jpgA Loma Metal Detection and Checkweighing combination system for compact one-process, space saving customer and brand reputation protection. This combined pairing features..

  • Loma IQ3 conveyorized digital metal detector with 4 3/8" high by 13.75 inch wide net USABLE aperture with the conveyor belt in place.

  • 39 inch long by 6 inch wide rubberized product transfer belt carries product through metal detector onto weighcell.

  • Loma LCW3000 CHECKWEIGHER with 9.5 inch long by 7 inch wide weighcell.

  • 31.5 inch long by 6 inch wide discharge and reject section takeaway belt, under plexiglas guards, with twin pneumatic pushoff rejects pushing off to the right of the product flow.

  • All food grade sanitary stainless steel construction

  • Late model, new 2013.


As of this writing, this combination metal detection and checkweigh system is in stock at Alard, in EXCELLENT operational, mechannical, and cosmetic condition, available for timely shipment. CALL 315-589-4511 to confirm current availability!

Alard item reference #:Y3385

Reconditoned Urschel H DICER, Alard Z4601

 

REFURBISHED URSCHEL MODEL H DICER...

z4601l_crop_email.jpgThe Urschel H is a three-dimensional cutter manufacturer rated cutting vegetable and fruit products such as pineapple, tomatoes, lettuce, potatoes, papaya, broccoli, and many others.

This model is specifically intended for producing large dices up to 1 inch, and a variety of strip cuts, for infeed product up to 5.5 inches (14cm) in any dimension.

Each of the three dimension is either adjustable for, or change parts are available for, the following cutting dimensions...

  • Slice thicknesses from 1/8 (3.2mm) inch to 3/4 inch (19.1mm).

  • Crosscut thickness from .75 inch (19.1mm) to 1.75 inch (44.5mm).

  • Circular knife cuts from 1/8 inch (3.2mm) to 3 inch (76.2mm).


This particular machine is configured with...

  • All food grade stainless steel product contacts, including slice shell and impeller, shrouds and guards, and (new) tubular stainless steel frame.

  • 7 inch slice shell opening for this model rated for products up to 5.5 inch (140mm) in any dimension.

  • NEW Urschel infeed hopper.

  • Newly plated stainless steel spindle arms.

  • Last used for 3/4 inch cubes, but other spindle / cut setups are available. CALL 315-589-4511 to dicuss your cutting specification!

  • Complete with 2HP 3 phase 208/230/460 volt drive motor; other voltage setups are available; --CALL 315-589-4511 to discuss your voltage specifications.


As of this writing, this reconditioned Urschel dicer is in stock at Alard, in EXCELLENT operational, mechanical and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #: Z4601

About this Archive

This page is an archive of entries from March 2017 listed from newest to oldest.

February 2017 is the previous archive.

April 2017 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)