A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

January 2018 Archives

Scott Turbon HR5 hydraulic ram MIXER, Y3785

SCOTT TURBON SANITARY HYDRAULIC RAM (HR) MIXER / EMULSIFIER / DISPERSER...

Scott Turbon HR5 hydraulic ram MIXER, Y3785 from Alard Equipment Corporation.


A sanitary stainless steel Scott Turbon Model HR-05 high shear mixer on a hydraulic ram power lift with portable mix tank.


FEATURING:

  • Comes with a Scott Turbon Model B mixer head for viscous/ thick liquids and emulsions; large diameter with toothed disc. Other mixer heads are available from the manufacturer. CALL 315-589-4511 to discuss your specific blending / emulsifying requirements.

  • Supplied with it's original factory-supplied 120 gallon stainless steel open top tank.

  • Manufacturer rated for batch sizes up to 1000 gallons, for appplicatons such as mixing salad dressings, thick emullsions or other viscous products in dispersion, de-agglomeration, dissolution, suspension, particle size reduction, homogenization and emulsification applications.

  • Stainless steel operator control panel with on/off, emergency stop, raise/lower, and variable speed controls.

  • Food grade USDA sanitary stainless steel, 3A dairy sanitary construction, but applicable beyond food and beverage for other uses such as pharmeceutical and biotech mixing, as well as for cosmetic and personal care product mixing.

  • 30HP drive motor with 460 volt 3 phase electrical input to frequency controller.


As of this writing, this high-shear emulsifier blender is in stock at Alard, little used and in LIKE NEW condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial process emulsifying and blending need.


Alard item reference #:Y3785


Modern Packaging SR8 ROTARY CUP FILLER video demo, Y3871

ROTARY CUP FILLER, TUB FILLER,
Modern Packaging SR8...


ROTARY CUP FILLER, Modern Packaging SR8DC, Alard item Y3781 from Alard Equipment Corporation.


A Modern Packaging model SR8DC continuous automatic rotary cup filling machine with cup dispenser, filler, oversealer capabilities in one compact unit, for USDA sanitry / 3A dairy food grade packaging applications.

FEATURING:

  • Cup dispenser places cups into the 8 station rotary filling carriage wheel.

  • Ingredient additive fill chute for fruits or crunchies.

  • Piston filler with cut-off valve.

  • Foil overseal placer and heat sealer.

  • Automatic ejector to integral takeaway conveyor belt.

  • Piston filler with cut-off valve; --manufacturer rated for .5 ounce to 14 ounce fills.
  • System rated at up to 40 cups per minute.

  • Came with container handling parts for a cup approximately 3.5 inch diameter with a pointed opening flap on the foil overseal; --which apparently fits such popular containers (see pictures) as the 5.3 ounce Chobani Greek yogurt cup.

    y3781_chobani_cup_fit_c.jpg
  • Complete with stainless steel control panel with Allen Bradley touchscreen operator control panel, including variable speed controls.

  • All stainless steel food grade USDA sanitary, 3A dairy grade construction.

As of this writing, this late / current model machine is in stock at Alard in VERY good operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food dairy cup filling machine specifcations.


Alard item reference #:Y3781

Eillert BL1000 DICER video demo. Y3098

Eillert BL-100 DICING MACHINE DEMO VIDEO - cutting potatoes...

Eillert BL-1000 DICER Y3098 from Alard Equipment Corporation on Vimeo.


EILLERT BL-1000 VEGETABLE DICER, STRIP CUTTER, SLICER -
A three-dimensional cutting machine manufacturer recommended for industrial volume cutting of vegetables and fruits into cubes, strips, and / or slices...

FEATURES:

  • Manufacturer rated for:
    • Up to 3 tons (5,000 kg) per hour throughput capacity, depending on cut size and product characteristics.
    • Input product sizes up to 4.7 inches in diameter.
    • Manufacturer recommended for fruits and vegetable including potatoes, carrots, peppers, onions, beets, tomatoes, apples and more...

  • Comes with parts for <>3/8 inch (2mm), <>5/8 inch (15mm) and <>3/4 inch (20mm) cuts.

  • All food grade stainless steel construction.

  • Variable speed with 3 speed selector switch.

  • 230 volt 3 phase electrical input.

As of this writing, this high-volume dicing machine is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your food process dicing and strip cutting specifications.

Alard item reference #: Y3098


VIBRATING SCREEN, 30 inch, 2 deck, stainless steel, Y3762

VIBRATORY SEPARATOR SCREEN,
ROUND 30 inch diameter, two deck, stainless steel...

y3762c_crop_email.jpg

A Kason Virbroscreen Model K30-2-SS, with two screening levels, for separating solids from liquids in dewatering / wastewater recovery applications, for size grading of granular, particulate, and other solids, for powder sifting, fines removal, scalping, and other such screening applications.


FEATURES:

  • 30 inch diameter stainless steel screen, two 4.5 inch high stainless steel deck rings, over a 4.5 inch deep stainless steel bottom pan ring.

  • Each ring has an 6 inch diameter discharge spout.

  • Other deck / screen configurations are available for grading applications:
    • CALL 315-589-4511 to discuss your food process screening, grading, dewatering, and / or solids separation needs.

  • Shown in pictures with a 1/4 wire mesh screen. Other sieve sizes and types of screen materials are available to buyer specification;
    • --CALL 315-589-4511 with your screen specs.

  • 30 inch infeed height, 25 inch top ring discharge height, 20 inch middle ring discharge height, 15 inch bottom ring dischargd height.

  • All food grade stainless steel construction screener, including stainless steel base.

  • Internal fractional horsepower 208 / 230 volt 3 phase eccentric drive.


As of this writing, this 30 inch vibrating screen in in stock at Alard in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular specifications.

Alard item reference #:Y3762


FITZMILL DKAS012, 15 HP, Y3661

FITZPATRICK INDUSTRIAL IMPACT MILL
15HP, stainless steel...

y3661m_crop_email.jpg

A Fitzmill Model DKAS012 comminutor hammermill, for controlled particle size reduction in food processing applications...

FEATURING:

  • 10 inch by 12 inch flanged infeed.

  • Sharp stainless steel fixed blades, with reversible shaft. Other hammer / knife parts for this comminuting machine are readily available; CALL 315-589-4511 to discuss your specific cutting / grinding milling application.

  • 15.5 inch by 12.5 inch flanged discharge with safety grid.

  • Stainless steel screen cage beneath hammers / knives determines cut cut size / particle size output; --CALL 315-589-4511 to discuss your particular particle size reduction requirement.

  • Food grade, all stainless steel product contact surfaces.

  • Painted steel legs and base.

  • 208/230/460 volt 3 phase 15 HP drive.


As of this writing, this Fitzpatrick mill is in stock at Alard, in EXCELLENT operational mechanical and cosmetic condition, and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your food grade particle size reduction requirements.


Alard Reference #: Y3661

ACCUMULATING DISC video demo Y1866

VIDEO DEMO - 60 inch diameter
ROTARY ACCUMULATION TABLE, ACCUMULATION DISC / FEED DISK / UNSCRAMBLER DISC,
food grade stainless steel.


y1866 elf accumulating disc from Alard Equipment Corporation.


An ELF Model 60TT 5 foot diameter stainless steel turntable accumulating disc, pack-on disc, pack-off disc, for food packaging line container handling applications.

FEATURING:

  • Food grade stainless steel disk-top, stainless steel base / cabinet, with tubular stainless steel frame and legs.

  • Underside wood disk-backing for strength, complimented by load-bearing trunnions e.g. for heavy, full / glass containers.

  • Presently set at a 36 inch working height on on locking rolling casters for portability.

  • Rails can be added for use as an single filer / unscrambling disk, or for accumulation, for bags, jars, can, bottles, trays, cartons, tubs, or buckets.

  • Complete with variable speed controller for gearmotor drive, 110 volt single phase electrical input (standard household current).


As of this writing, this 5 foot diameter pack-on / pack-off disk is in stock at Alard, without rails (but has rail mounts), in very good operational condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food pakcaging equipment needs.

Alard item reference #:Y1866


SPIRAL FREEZER, compact, LN2 nitrogen, Y3604

COMPACT SPIRAL FREEZER,
CRYOGENIC LIQUID NITROGEN,
food grade USDA sanitary stainless steel...

y3604ab_crop_email.jpg

A Praxair Coldfront Nitroshield LN2 Model JE-U6-26/180/3.5 packaged / compact cabinet spiral freezing system, uses nitrogen gas for fast and powerful cooling and freezing.

FEATURES:

  • y3604a_crop_email.jpg11 tier spiral with 3.5 inch height clerance between tiers.

  • Open weave wire mesh belt, 24 inches wide by 180 feet long.

  • Low level infeed, high level discharge.

  • 7 minute dwell time.

  • Complete with Honeywell chart recorder and operator controls.

  • Owner represents as recently rebuilt by a cryogenic company.

  • Compact / packaged cabinet design, portable / shippable with minimal disasembly.

  • All food grade USDA sanitary stainless-steel construction.

  • 460 volt 3 phase drive.


As of this writing, this portable spiral freezer is located in the eastern US, and is represented by it's owner as in excellent operational condition, and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food product freezing equipment needs.

Alard Reference #:Y3604

Urschel GRL VIDEO DEMO, cutting french fries, Y3478

VIDEO DEMO -
URSCHEL Model GRL
CUTTING FRENCH FRIES
Alard item Y3478

Urschel GRL VIDEO DEMO, cutting french fries, Y3478 from Alard Equipment Corporation on Vimeo.


An Urschel model GRL french fry cutting machine, strip cutter, chip cutter, flat slice or crinkle cut, shown here in a video demonstration cutting krinkle cut french fry strips from white potatoes, russet potatoes and sweet potatoes.

As of this writeup, this machine has been reconditioned to EXCELLENT operational, mechanical and cosmetic condition, and is in stock at Alard available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular root crop vegetable cutting equipment needs...

Alard item reference #: Y3478

Urschel GRL french fry cuttting machine, strip cutter, Y3480

URSCHEL MODEL GRL
FRENCH FRY CUTTER / STRIP CUTTER...

y3480p crop_email.jpg

An industrial high-capacity cutting machine designed specifically for strip cutting plain and crinkle cut potato strips / french fries, providing for longer cuts with greatly reduced fines.


FEATURES:

  • Manufacturer rates for potatoes up to 9 inches (230 mm) in length.

  • A two-dimensional cutter:
    • Slice thickness knob adjustable up to 9/16 inch (14.3mm).
    • Currently equipped with a 7/16 (11.1mm) inch crosscut knife spindle. Othercross cut spindles are available; --CALL ALARD at 315-589-4511 for current availability, and to dicuss your particular cutting specifications.

  • Aftermarket electrical control panel with safety interlock system, which cuts power to the machine if safety guards are removed.

  • Low maintanence, only two moving parts.

  • All stainless steel frame and shrouding.

  • New, dimpled surface, infeed chute.

  • "Urschalloy" slice shell and impeller.

  • 2 HP 3 phase drive.


As of this writing, this Urschel GRL potato strip cutting machine is in stock at Alard, in good operational condition, available for timely shipment.

CALL ALARD 315-589-4511 for current availability, and to discuss your particular industrial food process high-capacity fruit and vegetable cutting machine needs.

Alard item reference Y3480


Waukesha 130 LOBE PUMP, 3 inch inlet-outlet, Alard item Y2776

WAUKESHA UNIVERSAL 1 Series Model 130
SANITARY ROTARY POSITIVE DISPLACEMENT PUMP...

y2776a_crop_email.jpg

A Waukesha Cherry-Burrell sanitary PD twin lobe pump, manufacturer recommended for pumping viscous fluids, slurries, or particulate bearing liquids in industrial food, dairy, canning, bakery, beverage and pharmeceutical processing applications...

FEATURING:

  • 3 inch inlet and discharge ports with sanitary Tri-clamp connections in a horizontal flow orientation. The head is jacketed with inlet/outlet fittings for cooling.

  • A food grade pump head with a T316 stainless steel body, cover and shaft, with easy disassembly for cleaning and sanitation.

  • Manufacturer literature rates for up to 150 gpm throughput (depending on product viscosity and head pressure, pump curves available on request) and a maximum of 600 RPM run speed, and up to 200 psi working pressure.


As of this writing, this Waukesha lobe pump head and gear reducer is in stock at Alard, in good operational, mechanical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 for current availability, and to dicuss your food product pump requirements.

Alard item reference #:Y2776

Food grade METAL DETECTOR with CONVEYOR BELT, 14x14, Alard item Y3394

FOOD METAL DETECTOR
with BELT CONVEYOR, 14x14...

y3394o_crop_email.jpg

A refurbished Goring Kerr model TEK-DSP LARGE aperture opening metal detector on a stainless steel thru-conveyor, for food grade / food processing, and other continuous industrial production process metal detection applications.

  • 14 inch wide by 14 3/8 inch high USABLE aperture opening (without side rails in place; --WITH side rails in place usable opening width is reduced to 12.5 inches wide) with conveyor belt and bed in place.

  • Epoxy painted aluminum search head enclosure with integral touchpad operator controls.

  • Stainless steel belt transfer through-conveyor, with a 96 inch long by 12.5 inch wide interlocking plastic chain type belt running over an anti-static micarta bed. 28 inch minimum working height on threaded rod adjustable foot pads.

  • Comes with 2 inch high anti-static plastic side rails running through the metal detection sensor (rails removable if not needed for your product).

  • New integrated belt-stop alarm REJECT system, with new gasketed PVC operator control box.

  • Fractional HP conveyor drive, with 220 volt single phase electrical input variable speed controller.

As of this writing, this reconditioned conveyorized metal detection system is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial process product inspection and metal contamination detection needs.

Alard item reference #:Y3394

Fruit and vegetble WASH REEL / DEWATERING DRUM, Y3689

FRUIT AND VEGETABLE TUMBLE WASH REEL /
DEWATERING DRUM...

A stainless steel rotary drum washer, screening reel, for dewatering, size grading, fines removal, scalping, and washing of root crop vegetables, and/or solids separation and water recovery from sliced, diced, or fresh-cut / pre-cut food products.


y3689c_crop_email.jpg

FEATURING:

  • 23 inch diameter by 64 inch long tumble washer / scavenger reel with 1/4 inch drum screen perforations...

  • 1 inch high spiral flight inside the drum.

  • Full length spray header inside the dirt reel.

  • Safety shroud / access doors on both sides of the washer barrel.

  • Food grade stainless steel construction.

  • Stainless steel underside collection pan.

  • On stainless steel support frame, presently set for a 49 inch infeed height, and 41 inch discharge height.

  • Trunnion driven with a fractional horsepower 3 phase drive.


As of this writing this rotary drum washer is in stock at Alard Equipment, in good condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your food process washing, grading, dewatering equipment equipment needs.


Alard Reference #:Y3689

About this Archive

This page is an archive of entries from January 2018 listed from newest to oldest.

December 2017 is the previous archive.

February 2018 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)