A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page


CORNELL 4 inch



A Cornell Model 4NMT-2R stainless steel hydro-flow food pump with 4 inch inlet and outlet connections, uses water as a transport medium. The water supports and cushions the food product being conveyed, so the Cornell Hydro-Transport Food Pump is an excellent foundation for a pipe flume, open flume, wash flume, chill flume, disinfectant bath, or other water conveyor configuration for gently conveying high volumes of whole or cut food products in water at tons-per-hour volume capacities.


  • Cornell 4NMT-2R stainless steel hydro-transport food pump with single port stainless steel impeller, 4 inch inlet and outlet.

  • y4636b_crop_email.jpgManufacturer rated for approximately 100 to 800 gallons per minute depending on RPM and head resistance.

  • Whole or cut food solids handling ability for products up to 2.94 inch (74.7 mm) diameter by 4 inch (171.6 mm) long.

  • 4 inch flanged suction outlet and discharge outlet connections appropriate for 4 inch water pipeline.

  • Non-clogging single port impeller conveys in a cushion of water. The water supports and cushions the food product being handled, so the (...Cornell Hydro-Transport Food Pump...).

  • Food grade stainless steel pump and impeller.

  • Designed and manufactured specifically to pump food products in water.

  • y4636c_crop_email.jpgEconomical for long distance conveying: Can convey food products several hundred feet, with much less floor space footprint, less maintenance, more capacity, and less expense than a belt conveyor, screw conveyor, bucket elevator, or vibrating conveyor.

  • Conveys products vertically, horizontally, diagonally, some or all of the above in the same system.

  • Elevates products gently, without mechanical damage.

  • Preheat product before cutting, peeling, etc.

  • Hydro-cool product to remove field heat, after blanching, etc.

  • Apply additives (dextrose, SAPP, etc.) while conveying.

  • Gently wash while conveying.

  • Ideal for industrial food processing and packing applications, for chilling, cooling, washing, sanitizing and conveying food products in water. Typically used for pre-cut produce, fresh-cut salad, seafood, frozen fruit and vegetable processing, and other food manufacturing operations.

As of this writing, this refurbished Cornell hydro-flow food pump is in stock at ALARD, in VERY GOOD OPERATING condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food handling needs.

ALARD item reference #: Y4636

JOIN our

Email list!
Email PRIVACY explanation link!

6483 Lake Avenue
Williamson, NY  14589
315-589-3871 (fax)

About this Entry

This page contains a single entry by Michael C. Shults, Alard Equipment Corp published on August 14, 2023 3:42 PM.

CVP A600 vacuum gas-flush BAG SEALER, Y5613 was the previous entry in this blog.

Six-inch FOOD PUMP with feed tank and drive, Y4996 is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.