Urschel Model GRL
FRENCH FRY CUTTER, STRIP CUTTER,
DICER...
 

The Urschel GRL is designed specifically for strip cutting plain and crinkle cut potato strips / French fries for longer cuts with greatly reduced fines.

FEATURES:

• Manufacturer rates for potatoes up to 9 inches (230 mm) in length.
  
  
• A two-dimensional cutter:
  
  
  • Slice thickness knob adjustable up to 9/16 inch (14.3mm).
    
    
  • INCLUDES one-set of cutting parts we have in stock, to be installed prior to shipment.
    
    
    • A variety of refurbished cross cut spindles are available - CALL ALARD at 315-589-4511 for current availability and to discuss your particular cutting specifications.
      
      
• Low maintenance - only two moving parts.
  
  
• Aftermarket electrical control panel with safety interlock system (cuts power to the machine if safety guards are removed) to be installed prior to shipment.
  
  
• Stainless steel frame and shrouding.
  
  
• New dimpled / non-stick surface infeed chute.
  
  
• "Urschalloy" slice shell and impeller.
  
  
• 2 HP drive 3 phase motor.
  
  
• 208/230/460 volt electrical input - please let us know your voltage requirements.

As of this writing, this Urschel GRL potato strip cutting machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL ALARD 315-589-4511 for current availability and discuss your particular industrial food process high-capacity fruit and vegetable cutting machine needs

ALARD item reference #: Y4787

URSCHEL MODEL RA-D DICER, dicing machine, cheese cutter...

This Urschel Model RA-D CHEESE DICER is mechanically the same as the Model RA or RA-A dicer with minor variations so as to be manufacturer rated for USDA sanitary dairy product processing applications. As with the RA and RA-A models, this is a 3-dimensional fine dicing machine for a wide range of small to intermediate size dices and strip cuts for a variety of products such as cheeses, pickle relish, salsa, fruits, vegetables, processed meats & nuts, citrus peel, green peppers, pineapple, and for dicing ice-cream ingredients such as cookies and candies.

FEATURES:

• Three cutting dimensions:
  
  
  • Slice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.
    
    
  • Crosscut knife cuts: 1/16 to 3 inch (1.6 to 76.2mm) - change part.
    
    
• Maximum product input size of 3.5 inches (88.9mm) in any direction.
  
  
• Four (4) paddle impeller.
  
  
• Currently set for 94 inch infeed height, 52 inch discharge height.
  
  
• Marchant-Schmidt custom fabricated aftermarket frame for high level discharge height.
  
  
• USDA dairy sanitary stainless steel construction.
  
  
• Stainless steel factory control box and safety INTERLOCK system.
  
  
• 10 HP drive.
  
  
• 208/230 volt 3 phase electrical input.
  
  

As of this writing, this item is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment - needing only to be set up with change parts prior to shipping.

CALL 315-589-4511 to confirm availability and discuss your particular high-capacity food process cutting equipment needs.

ALARD item reference #: Y5735

URSCHEL Model GK-A DICER,
strip cutter, French fry cutter, flat or crinkle cuts...

The Urschel GK-A is a three-dimensional cutting machine, manufacturer rated for product input size of up to 5.5 inches (140mm) in any dimension. Manufacturer recommended for uniform flat or crinkle cuts, for dices, cubes, French fry strips, julienne cuts and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output

Three cutting dimensions:

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 (76mm) inches -- change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s) the Urschel GKA can also cut strips (two-dimensional cuts) such as for french fries and slices (single dimensional cut).
  
  
• Use of flat cut or crinkle cut knives determine flat or crinkle cut output.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to discuss your cutting specifications!
  
  

FEATURES:

• Stainless steel slice shell and impeller with 10 inch slice shell opening.
  
  
• All food grade USDA sanitary stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Factory control box with safety interlock system.
  
  
• 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel GKA dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process capacity fruit & vegetable cutting equipment needs.

ALARD item reference #: Y5661

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter...

The Urschel model G-A dicing machine is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output.

Three cutting dimensions:

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches (76mm) - change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement.

This cutting machine FEATURES:

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• 2 HP stainless steel shrouded motor.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

ALARD item reference #: Y5342

URSCHEL Model OC-30 TRANSVERSE SLICER
for making angled coin cuts of oblong fruits and vegetables
in a variety of crinkle or flat bias slices...

The Urschel OC slicer is a crosscut bias slicing machine for making angled coin cuts of oblong fruits and vegetables in a variety of crinkle or flat bias slices. Manufacturer recommended for pickles, carrots, celery, plantains, rhubarb, okra, potatoes, zucchi, squash, bread, and a variety of other vegetable and fruit products.

Manufacturer SPECIFICATIONS:

• Slice thickness from 1/16th inch (1.58mm) to 1.75 inch (44.5mm), with cutting wheel and belt timing set to slice.
  
  
• Maximum product input size of 2.5 inches (63.5mm) in diameter.
  
  
• Flat slices or crinkle cut cutting setups are available
  
  
• The manufacturer also offers a special micro-slice cutting head for .30 to .120 inch slices.
  
  
• CALL 315-589-4511 to discuss your specific industrial food process cutting equipment need.

FEATURES:

• ANGLED cutting wheel configuration for bias-cut slicing.
  
  
• Safety interlock system with factory control panel - cuts power to the machine if safety shrouding is removed.
  
  
• Food grade white rubberized product feed belt.
  
  
• 35 inch infeed height, 26 inch high discharge.
  
  
• All food grade sanitary stainless steel construction.
  
  
• Stainless steel control box with safety interlock system.
  
  
• Electric drive motors:
  
  
  • 1 HP conveyor belt.
    
    
  • 2 HP cutting head.
    
    
• 208 / 230 volt 3 phase electrical input.

As of this writing, this Urschel OC slicer is in stock at Alard in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial food process fruit and vegetable cutting machine needs.

ALARD item reference #: Y5666

URSCHEL Model HS-A SLICER,
for flat slice cuts,
USDA food grade sanitary stainless steel
fruit and vegetable slicing machine...

A simple, yet rugged, high-speed centrifugal slicing machine manufacturer recommended for cutting a wide variety of produce including beets, potatoes, carrots, cabbage, lettuce, eggplant, cucumbers, pickles, cranberries, apples, pears, strawberries, tomatoes, and peaches. Engineered for continuous tons-per-hour industrial-scale production, in a simple design for easy clean-up & maintenance.

SPECIFICATIONS, per manufacturer literature:

• Slice thickness is knob adjustable from 1/16 inch (1.6mm) up to 1 inch (25.4mm).
  
  
• Accepts product input up to 5.5 inches (140mm) in any dimension - larger products must be precut.
  
  
• Throughput capacity depends on slice thickness and density, so for example, root crop vegetables are rated for 12,000 lbs per hour for 1/4 inch (6.4mm) slices, while capacity on 3/4 inch (19mm) slices will be 36,000 pounds per hour. On products which are lighter than root vegetables, the capacity will be lower in accordance with the density of the products.
  
  
• At reduced capacities, this slicer will make slab cuts / sandwich cuts, slicing the full length of oblong products such as potatoes, carrots & pickles, but the products must not be longer than 5 inches.
  
  
• This slicer will not cross-cut elongated products - the Urschel Model OV, which we also have in stock as of this writing, is used for crosscut slicing.
  
  
• Some products may need to be frozen or tempered for firmness to be successfully cut with this machine - CALL 315-589-4511 to discuss your particular industrial food process cutting machine application.
  
  
• "A" model, manufacturer rated as USDA food grade sanitary.

OPERATION:

• Product is fed thru a hopper into a rotating impeller, for high-capacity continuous production.
  
  
• Centrifugal force holds product against inside of slice case as impeller blades carry product past slicing knife.
  
  
• Distance between adjustable case gate and slicing knife determines slice thickness.
  
  

FEATURES:

• Stainless steel 7 inch opening slice shell.
  
  
• 40 inch infeed height, 18 inch high discharge.
  
  
• Food grade stainless steel construction.
  
  
• 2 HP drive motor.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food equipment needs.

ALARD item reference #: Y5413

URSCHEL Model GK-A DICER,
strip cutter, French fry cutter, flat or crinkle cuts.

The Urschel GK-A is a three dimensional cutting machine, manufacturer rated for product input size of up to 5.5 inches (140mm) in any dimension. Manufacturer recommended for uniform flat or crinkle cuts, for dices, cubes, French fry strips, julienne cuts and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions.

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 (76mm) inches -- change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s) the Urschel GKA can also cut strips (two-dimensional cuts) such as for french fries and slices (single dimensional cut).
  
  
• Use of flat cut or crinkle cut knives determine flat or crinkle cut output.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to discuss your cutting specifications!

FEATURES:

• Stainless steel slice shell and impeller with 10 inch slice shell opening.
  
  
• All food grade USDA sanitary stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Factory control box with safety interlock system.
  
  
• 2 HP drive motor.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel GKA dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process capacity fruit & vegetable cutting equipment needs.

ALARD item reference #: Y5603

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter.

The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions...

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine cut size.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches (76mm) - change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• ALARD can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement.

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• 2 HP stainless steel shrouded motor.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock, in GOOD operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial volume food cutting machine / equipment needs.

ALARD item reference #: Y5490

URSCHEL MODEL G DICER,
STRIP CUTTER, SLICER...

Reconditioned Urschel G DICER, strip-cutter, slicer, french-fry cutter,
Alard item Y5318

This refurbished URSCHEL Model G DICER, strip cutter, slicer, French fry cutter. A three dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output.

Three cutting dimensions...

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches (76mm) --change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 10 inch opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Gasketed PVC control box with safety interlock system.
  
  
• Standard 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting specification.

ALARD item reference #: Y5318

URSCHEL COMITROL PROCESSOR,
Model 3000, 30HP...

DEMO VIDEO
Urschel Comitrol 3000 MILL making sweet pepper puree,
Alard item Y5483
from Alard Equipment Corporation.

Manufacturer recommended for industrial tons-per-hour food processing applications, for milling, pureeing, fine grinding, high-shear emulsifying, homogenizing, and finishing; of viscous and liquid food products, such as fruit nectars, fruit butters, condiments, sauces, dressings, pulps, gelatins, soy milk, baby formula, tomato ketchup, barbecue sauces, vegetable purees, beverage concentrates, and creams and ointments.

Manufacturer recommended for uniform milling of high moisture substrates such as cooked meats, whole kernel corn, ricotta cheese, beans and other vegetables.

FEATURES:

• 9 inch diameter by 14.5 inch deep straight side infeed hopper with 4 inch Triclamp.
  
  
• 3 inch cutting head with dogleg impeller - a range of parts are available for this machine, CALL 315-589-4511 to tell us YOUR cutting specification!
  
  
• 5 inch by 3 inch discharge outlet at 33 inch high.
  
  
• Equipped with oil mist system.
  
  
• 58 inch high infeed, 38 inch discharge height.
  
  
• Two-piece enclosure for ease of sanitation and maintenance.
  
  
• All food grade stainless steel construction.
  
  
• Factory control panel with safety interlock system.
  
  
• 30 horsepower brake motor drive.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Urschel Comitrol 3000 is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition and available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process particle size reduction needs.

ALARD item reference #: Y5483

URSCHEL MODEL J
DICER / STRIP CUTTER / GREENS CHOPPER...

A two dimensional cutting machine for industrial food processing applications, manufacturer recommended for food products up to 1/2 inch (13mm) thick at infeed, such as spinach and greens, peppers, citrus peel, celery, broccoli, and parsley.

Manufacturer literature specifies this model for cutting square or rectangular dices, with...

• Circular knives that can be spaced for cuts from 3/16 inch (4.763mm) to 3 inches (76mm), and...
  
  
• ...a selection of crosscut spindles are available from the manufacturer for cuts from 1/4 inch (6.35mm) to 3 inches (76mm).
  
  
• Strip cuts can be made by removing the crosscut knife spindle from the machine, with the length and thickness of the strips depending on the size of the original product.

This machine FEATURES:

• Urschel factory original safety interlock system with factory control box, which disconnects power to the machine if safety guards are removed.
  
  
• 9 inch (229mm) wide feed belt and cutting spindles.
  
  
• Food grade stainless steel product contact surfaces, stainless steel tubular support frame, guards, shrouds and discharge chute.
  
  
• Most standard cut sizes are available CALL 315-589-4511 to discuss YOUR cutting specification.
  
  
• 5HP 3 phase brakemotor drive. .

As of this writing, this reconditioned Urschel J dicer / strip cutter / greens chopper is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with cutting parts to buyer specifcation.

CALL 315-589-4511 to confirm availability, and to discuss your industrial food processing cutting, dicing, chopping and strip cutting needs.

Alard item reference #:Y5652

DEMO VIDEO
URSCHEL TRANSLICER CUTTER,
with 25 inch cutting head...

VIDEO DEMO
cutting heads of iceburg lettuce...
Urschel TRANSLICER CUTTER, 25 inch cutting head,
from Alard Equipment Corporation item Y5554

The Urschel TRANSLICER 2500 series SLICER is a two (or optionally three) dimensional cutter with a large interchangeable 25-inch cutting wheel allowing for very high speed cutting of large, leafy vegetables and fresh-cut fruits without pre-cutting. Very high capacity for industrial food factory, food processing applications. Manufacturer rated for a wide range of food products including romaine and iceburg lettuce, cabbage, celery, melons, peppers, potatoes, carrots, cucumbers, pineapple, onions, spinach, and certain meats.

FEATURES:

• Manufacturer rated for large fruit and vegetable products up to:
  
  
  • Compressible food products up to 8 inches (203mm) in diameter.
    
    
  • Firm round products (e.g. cabbage) up to 6.75 inches (171mm) in diameter.
    
    
• Unless otherwise specified, this machine will be priced to include ONE 25-inch cutting wheel from the range of cutting wheels Alard has available in stock. Call 315-589-4511 to discuss your particular cutting specification.
  
  
• The pitch, number of knives, and belt-speed determine the cut. A full range of cutting parts are available from the manufacturer for:
  
  
  • FLAT SLICES from 1/32 inch (.8mm) to 3.5 inches (88.9mm).
    
    
  • JULIENE CUTS (2-dimensional) cuts from soft products from 3.8 inch (9.5mm) by 1/8 inch (3.2mm) up to 2 inch (76.1mm) by 2 inch (50.8mm); and...
    
    
  • SHRED CUTS ranging from 3/8 inch (9.5mm) to approximately 3 inches (76.1mm) in length, and 1/32 inch (.8mm) to 9/32 inch (7.1mm).
    
    
• Two high-speed feed belts sloped to form a "V-Belt" cross-section.
  
  
  • First belt orients and accelerates the product.
    
    
  • Second belt is synchronized with the speed of the cutting head to achieve the desired slice thickness.
    
    
• Food grade sanitary stainless steel construction.
  
  
• Complete with factory electrical control panel with variable speed controllers, and an electronic safety interlock system integrated with brakemotor drive.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this Urschel Translicer with a 25 inch cutting head is in stock in excellent operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial capacity food factory cutting equipment need.

Alard item reference #:Y5554

URSCHEL Model OV cross-cut transverse SLICER,
for elongated food products...

Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.

SPECIFICATIONS:

• Cutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thickness from 1/16 (1.6mm) of an inch up to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.
  
  
• Rated for products no more than 2.75 inches (70mm) in diameter or width.
  
  
• Flat or krinkle cut blades and shear edges are available for corrugated or flat slices.
  
  
• One slice is made at a time, which prevents crushing or distortion of the product.
  
  
• An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.
  
  
• The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.

FEATURES:

• 24 inch long by 15 inch wide stainless steel infeed hopper.
  
  
• V-trough belt aligns and centers products for uniform cross cut slicing.
  
  
• Standard "floppy belt" product hold down mechanism for positive product alignment and stability.
  
  
• Spiral discharge chute gently decelerates the cut slices.
  
  
• 48.5 inch high infeed, 20 inch discharge height.
  
  
• Food grade USDA sanitary stainless steel construction including frame.
  
  
• Factory control panel with safety interlock system.
  
  
• 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this Urschel model OV slicing machine is in stock at ALARD in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit & vegetable slicing specification.

ALARD item reference: Y5502

URSCHEL Model OV cross-cut transverse SLICER,
for elongated food products...

Manufacturer rated for producing flat or crinkle cut crosscut slices, aka "coin cuts", from elongated food products such as carrots, celery, cucumbers (pickles), peppers, squash, bananas, pepperoni, leeks, etc.

SPECIFICATIONS:

• Cutting wheels (change part) available for precise, tons-per-hour industrial fruit and vegetable slicing in thickness from 1/16 (1.6mm) of an inch up to 1 1/3 inch (34mm). Call 315-589-4511 to discuss your particular cutting requirement.
  
  
• Rated for products no more than 2.75 inches (70mm) in diameter or width.
  
  
• Flat or krinkle cut blades and shear edges are available for corrugated or flat slices.
  
  
• One slice is made at a time, which prevents crushing or distortion of the product.
  
  
• An average sized pickle goes through this machine in 1/30 of a second, and is uniformly sliced by knives moving at 95 feet per second. This high speed causes clean slices to be produced, even as the knives lose their sharpness.
  
  
• The machine is not recommended for slicing sticky products, or products with a very high concentration of sugar.

FEATURES:

• 24 inch long by 15 inch wide stainless steel infeed hopper.
  
  
• V-trough belt aligns and centers products for uniform cross cut slicing.
  
  
• Standard "floppy belt" product hold down mechanism for positive product alignment and stability.
  
  
• Spiral discharge chute gently decelerates the cut slices.
  
  
• 48.5 inch high infeed, 20 inch discharge height.
  
  
• Food grade USDA sanitary stainless steel construction including frame.
  
  
• Factory control panel with safety interlock system.
  
  
• 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this Urschel model OV slicing machine is in stock at ALARD in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial fruit & vegetable slicing specification.

ALARD item reference: Y5502

URSCHEL MODEL RA-D DICER/SLICER.

DEMO VIDEO
Urschel Model RA-D DICER cutting mozzarrella Y5441
from Alard Equipment Corporation.

This Urschel Model RA-D CHEESE DICER is mechanically the same as the Model RA or RA-A relish and salsa dicer with minor variations making it approved to operate in a USDA sanitary dairy product processing application. As with the RA and RA-A models, this is a 3-dimensional fine dicing machine for a wide range of small to intermediate size dices and strip cuts for a variety of products such as pickle relish, salsa,fruits, vegetables, cheese, processed meats & nuts, citrus peel, green peppers, pineapple, and for dicing ice-cream ingredients such as cookies and candies.

FEATURES::

• Three cutting dimensions:
  
  
  • Slice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.
    
    
  • Crosscut knife cuts: 1/16 to 3 inch (1.6 to 76.2mm)
    
    
• To be configured with (1) set of in-stock change parts prior to shipment (Call 315-589-4511 to discuss your cutting specification).
  
  
• Maximum product input size of 3.5 inches (88.9mm) in any direction.
  
• USDA sanitary stainless steel construction, inclunding frame.
  
  
• Stainless steel factory control box and safety INTERLOCK system.
  
  
• 5HP motor.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this item is in stock at Alard, in excellent mechanical, operational, electrical and cosmetic condition, available for timely shipment; --needing only to be set up with change parts prior to shipping.

CALL 315-589-4511 to confirm availability, and to discuss your particular high-capacity food process cutting equipment needs.

Alard item reference #: Y5441

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter...

A refurbished Urschel dicer. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions...

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches (76mm) --change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES:

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• 2 HP stainless steel shrouded motor.
  
  
• 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

ALARD item reference #: Y5343

URSCHEL CC SLICER / SHREDDER / GRANULATOR

The reconditioned and ready-to-go Urschel Model CC is manufacturer recommended to shred, slice, strip cut or granulate a multitude of food products at high production capabilities ranging from potatoes for chips, raw mushrooms, cabbage, lettuce, onions, carrots for salad ingredients, and wide variety of nut meats for bakery ingredients. A range of cutting head setups are available for this machine with over a dozen different types of cuts, including flat cuts, "V" slices, "Flat-V" shreds & slices, crinkle cut potato chips, match-stick cuts, strip cuts, full shreds, V-shreds, oval shreds, crescent shreds, wide crescent shreds, and various options for grating, on input of up to 3.5 inches (88.9 mm) in any dimension...

FEATURING:

• Stainless impeller and 17 inch diameter cone hopper.
  
  
• TO BE completed with one available slice shell to customer specification prior to shipment. Call 315-589-4511 to discuss your slicing or shredding specification(s).
  
  
• Dimpled, rigidized, stick-resistant stainless steel top & bottom shrouds.
  
  
• Mounted on factory elevated frame with 5 inch locking casters for ease of mobility.
  
  
• 61 inch high infeed, 36 inch discharge height.
  
  
• Standard 2HP belt drive motor and stainless steel transmission.
  
  
• Factory control panel with safety interlock system.
  
  
• All food grade sanitary stainless steel construction.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this refurbished Urschel shredder / slicer is in stock at Alard, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food processing needs.

ALARD item reference #: Y5371

URSCHEL MODEL G DICER,
strip cutter, slicer, French fry cutter...

A refurbished Urschel dicer. The Urschel Model G is a three-dimensional continuous cutting machine, manufacturer rated for product input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-hour output.

THREE CUTTING DIMENSIONS:

• Slice thickness from 1/8 inch (3.2 mm) to 3/4 inch (19.1 mm) - knob adjustable.
  
  
• Circular knives from 1/8 inch (3.2 mm) to 3 inches (76 mm) - spacers and number of knives determine.
  
  
• Crosscut knife spindle spacing from 9/32 inch (7.1 mm) to 7/8 inches (22.2mm) - change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional) such as for French fries, and slices (single dimensional cut).
  
  
• Cuts uniform cubes / dices up to 3/4 inch square.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications.

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 7 inch opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel control box with safety interlock system.
  
  
• Standard 2 HP drive motor.
  
  
• 208 / 230 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial food process cutting specification.


ALARD item reference #: Y5086

URSCHEL COMITROL PROCESSOR Slant model 3610, 10HP.

A compact Comitrol mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications...

FEATURES:

• Tapered infeed hopper 8 inches front-to-back by 12 inches wide with safety baffles.
  
  
• 3 inch cutting head -- manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions / powders / granules.
  
  
• Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
  
  
• Continuous operation for uninterrupted production.
  
  
• Designed for easy clean-up and operation.
  
  
• 58 inch high infeed, 29.5 inch discharge height.
  
  
• Food grade sanitary stainless steel product contact surfaces and support frame construction.
  
  
• Factory control box with safety interlock system.
  
  
• 10 HP drive with brake-motor.
  
  
• 230 / 460 volt 3 phase electrical input.
  
  

As of this writing, this Urschel Comitrol 3610 milling machine is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your industrial volume food cutting equipment needs.

ALARD item reference #: Y5061

URSCHEL DIVERSACUT 2110 DICER...

The Urschel Model 2100 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision...

MANUFACTURER SPECIFICATIONS:

• Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.
  
  
• Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.
  
  
• Crosscut knife -- change part:
  
  
  • Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)
    
    
  • Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
    
    
  • "Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
    
    
  • V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).
    
    
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• Manufacturer rated for input size up to 10 inches (254mm) in any dimension which reduces need to pre-cut product; --but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine requirements.
  
  
• This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie/candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!

FEATURES:

• Came set for flat slice dices (would require significant change parts for crinkle cuts); -- other cutting parts available from the manufacturer. CALL 315-589-4511 to discuss YOUR food process cutting machine specifications.
  
  
• 5 HP stainless steel shrouded drive motor,
  
  
• Factory stainless steel operator control panel with safety interlock system.
  
  
• All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y5164