A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

Cornell FOOD PUMPS in stock NEW, Y3765, Y3766

CORNELL FOOD PUMPS
IN STOCK NEW,
for immediate shipment...


y3765_y3766_crop_email.jpg

Alard is a dealer for and keeps continuous inventory of Cornell Hydro-Transport FOOD PUMPS, available as pump only, or intergrated with drives and feed tanks. These offset expanded volute food pumps are an excellent foundation for a pipe flume, open flume, wash flume, chill flume, disinfectant bath, or other water conveyor configuration for gently conveying high volumes of whole or cut food products in water at tons-per-hour volume capacities.

Pictured here are just two of the pumps we as of this writing, in stock new and available for immediate shipment:

  • y3765_y3766c_crop_email.jpgA Cornell Model 6NHPP-F16K hydro transport food pump, with 6 inch inlet and outlet with flanged connections.
    Alard item reference #: Y3766

  • A Cornell Model 4NMPP-F5K hydro transport food pump, with 4 inch inlet and outlet with flanged connections.
    Alard item reference #:Y3765

  • Expanded volute PP series pump for the ultimate in gentle handling of delicate food products. So gentle the manufacturer rates for pumping live fish!

  • Specifically designed and built for industrial food processing application use, with tons-per-hour throughput capacity.

  • Manufacturer recommends 2 or 3 to 1 ratio of water to product, with your product capacity determined by horsepower, RPM, and total dynamic head resistance. Pump curves are available by request; --call 315-589-4511 do discuss your specific application requirements.

  • NEW, with two-year manufacturer warranty.

y3765_y3766d_crop_email.jpgThe Cornell hydro transport food pump is frequently employed to power open stainless steel flume systems, while others, pump into a closed pipe flume, which they run in a coil pattern on the ceiling to conserve floor space. The flumes provide hold time to remove heat, and extend exposure to the water, which usually includes either a sanitizing agent, or a preservative solution such as vitamin C; depending on the product. The power of the Cornell Hydro-Transport pump allows food producers to deliver their now chilled and treated ingredients to any point in the plant where they want to dry, mix and pack the final product.

Others use the chill flume for pre-cooling blanched (very lightly cooked to kill the active enzymes) food products in water prior to running them through an IQF freeze tunnel. Others use the flume system just to convey product in water. In every case, the powerful Cornell pump can gently move high tons-per-hour output to wherever it needs to go in the plant.

Alard also stocks and custom-configures various kinds of dewatering, solids-separation, water recovery and filtration equipment to recover the food product from the pump water, and to recapture, treat and recirculate the water as necessary, as well as drying and packaging equipment to complete the process; all tailored to the end-user's specific food product(s) and application. With Cornell's large range of hydro-transport pump size and material configurations, and with Alard's ability to configure and "gear" the pump to the buyer's specific needs, Alard's Cornell Hydro-Transport food pumps are a superb tool for a wide variety of industrial food processing applications.

As of this writing, these Cornell flume pumps are IN stock NEW at Alard, and available for immediate shipment.

CALL 315-589-4511 to confirm current availability, and to discuss your particular food process bulk product conveying, chilling, cooling, sanitizing and pumping equipment needs.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)
 

About this Entry

This page contains a single entry by Michael C. Shults, Alard Equipment Corp published on January 28, 2020 2:22 PM.

Urschel Comitrol 3600 confetti cutting sauerkraurt, Y3052 was the previous entry in this blog.

Fitzpatrick Fitzmill 6 inch industrial impact mill, Y3847 is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.