URSCHEL Model RA DICER...
Cutting Cookies

DEMO VIDEO
Urschel Dicer, model RA, cutting_cookies for ice cream sprinkles,
from Alard Equipment Corporation.

The Urschel RA dicing machine, famed as the industry standard relish-dicer, is 3-dimensional fine dicing machine for a wide range of small to intermediate size dices and strip cuts for a variety of products such as pickle relish, salsa, fruits, vegetables, cheese, processed meats & nuts, citrus peel, green peppers, pineapple, and for dicing ice-cream ingredients such as cookies and candies.

FEATURES:

• Equipped with a secondary / by-pass in-feed chute, which bypasses the slice shell for strip cutting applications such as for chopping herbs, green onions, nuts (e.g. almonds, cashews & peanuts) and other fruit and vegetable products .
  
  
• Maximum product input size of 3.5 inches (88.9mm) in any direction.
  
  
• Three cutting dimensions (or two-dimensional cuts using aforementioned bypass feed chute).
  
  
  • Slice thickness: 1/16 to 3/8 inch (1.6 to 9.5mm) -- knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch (3.2 to 25.4mm) -- knives & spacers.
    
    
  • Crosscut knife cuts: 0.05 to 3 inch (1.3 to 76.2mm) -- change part: Call 315-589-4511 to tell us YOUR cutting specification!
    
    
• Food grade sanitary stainless steel product contact surfaces.
  
  
• 3HP drive motor. ~ Stainless steel control panel. ~ 208/230/460 electrical input.

As of this writing, this Urschel cutting machine is in stock at ALARD, in stock at Alard, in GOOD operational and mechanical condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your high-capacity food process cutting machinery needs.

ALARD item reference #: Y4254

URSCHEL MODEL M6 DICER...

VIDEO DEMONSTRATION
of an
Urschel M6 DICER, dicing HAM,
Alard item Y4639 from Alard Equipment Corporation.

A two-dimensional vegetable and meat cutter designed for dicing, strip cutting, or shredding a variety of products through a wide range of sizes. This versatile dicing machine, strip-cutter, and shredder is ideally suited for cutting beef, pork, poultry or fish through a wide temperature range from fresh chilled to hot cooked. Also manufacturer recommended as a leafy greens chopper for collard greens, kale, leeks, mustard greens, and spinach. This versatile machine is also recommended for cutting other food products into strips or squares including fruit leathers, flat breads, tortillas, pita chips, brownies, and croutons. This is a high-volume cutting machine that operates continuously at high production capacities, and is designed for easy cleanup and maintenance.

Manufacturer SPECIFICATIONS:

• Infeed thickness of up to 1 inch (25.4mm).
  
  
• Circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm).
  
  
• Crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm).
  
  
• STRIP CUTS can be made by removing the crosscut knife spindle. The length and thickness of the strips will depend on the size of the original product.
  
  
• SHREDS - many types available for applications such as cooked pork, cooked beef, or cooked chicken, in medium, long or fine shreds.

FEATURES:

• This machine comes with 1/4 inch feed drum, and a 3/4 inch crosscut spindle. Circular knife spindle spacings can be easily adjusted in increments 1/4". Other cutting parts are available from the manufacturer: --CALL 315-589-4511 to discusss your particular cutting specifications.
  
  
• 10 inch wide feed belt with 35 inch length of open belt-feed area.
  
  
• Includes factory stainless steel operator control panel with safety interlock system.
  
  
• USDA food grade construction, including stainless steel cutting spindles, tubular support frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 5 HP 208 / 230 / 460 volt 3 phase drive motor.

As of this writing, this Urschel M6 DICER is available in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting equipment needs.

Alard item reference #:Y4639

Dual-stage TROUGH BELT FEED CONVEYOR, 7.5 feet long...

Grove Dale FLITEFEEDER Model TB62L TROUGH BELT FEEDER. A two-stage trough belt for increasing spacing between food products to feed downstream equipment in an industrial food processing environment. Also known as a speed-up belt. Ideal as a feeder belt for Urschel cutting machines such as the Urschel OV, OC, and / or Urschel VSC segment cutter; et al. Especially well suited for elongated products such as pickles / cucumbers, carrots, celery, zuccini, okra, rhubarb, pepperoni sausage, and other fruit and vegetable items 4 inches or less in diameter. Similar to a Magnuson speedup belt model FF trough-conveyor belt product separator and feed belt.

FEATURES:

• Side-by-side belts in V-trough configuration, in two sections one-after-the-other, specifically to keep product aligned and centered while increasing spacing between products as they are fed to a cutter or other packaging or processing machine:
  
  
  • 1st V-belt section / stage is 62 inches long.
    
    
  • 2nd V-belts stage / section is 48 inches long.
    
    
  • This V-belt feed conveyor is 7 feet 7 inches long from end to end.
    
    
• Tubular stainless steel pedestal legs with 4 inch threaded rod adjustable feet.
  
  
• Food grade sanitary stainless steel construction.
  
  
• SEW (Eurodrive) .75 HP 208 / 230 / 460 volt 3 phase constant speed drive motor.

As of this writing, this speedup belt is in stock at Alard, in EXCELLENT condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food food process feed conveyor need.

Alard item reference #:Y4634

URSCHEL MODEL M6 DICER...

A two-dimensional vegetable and meat cutter designed for dicing, strip cutting, or shredding a variety of products through a wide range of sizes. This versatile dicing machine, strip-cutter, and shredder is ideally suited for cutting beef, pork, poultry or fish through a wide temperature range from fresh chilled to hot cooked. Also manufacturer recommended as a leafy greens chopper for collard greens, kale, leeks, mustard greens, and spinach. This versatile machine is also recommended for cutting other food products into strips or squares including fruit leathers, flat breads, tortillas, pita chips, brownies, and croutons. This is a high-volume cutting machine that operates continuously at high production capacities, and is designed for easy cleanup and maintenance.

Manufacturer SPECIFICATIONS:

• Infeed thickness of up to 1 inch (25.4mm).
  
  
• Circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm).
  
  
• Crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm).
  
  
• STRIP CUTS can be made by removing the crosscut knife spindle. The length and thickness of the strips will depend on the size of the original product.
  
  
• SHREDS - many types available for applications such as cooked pork, cooked beef, or cooked chicken, in medium, long or fine shreds.

FEATURES:

• This machine comes with 1/4 inch feed drum, and a 3/4 inch crosscut spindle. Circular knife spindle spacings can be easily adjusted in increments 1/4". Other cutting parts are available from the manufacturer: --CALL 315-589-4511 to discusss your particular cutting specifications.
  
  
• 10 inch wide feed belt with 35 inch length of open belt-feed area.
  
  
• Includes factory stainless steel operator control panel with safety interlock system.
  
  
• USDA food grade construction, including stainless steel cutting spindles, tubular support frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 5 HP 208 / 230 / 460 volt 3 phase drive motor.

As of this writing, this Urschel M6 DICER is available in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting equipment needs.

Alard item reference #:Y4639

URSCHEL Model GK-A DICER, strip cutter,
French fry cutter, flat or crinkle cuts...

A three dimensional cutting machine, manufacturer rated for products input-sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform flat or crinkle cuts, for dices, cubes, French fry strips, julienne cuts and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions.

• Slice thickness: from 1/8 inch (3.2mm) up to 5/8 inch (16mm) -- knob adjustable.
  
  
• Circular knives: from 1/8 inch (3.2mm) to 3 inches (76mm) -- spacers and number of knives determine.
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 (76mm) inches -- change part.
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel GKA can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• Use of flat cut or crinkle cut knives determine flat or krinkle cut output.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications -- CALL call 315-589-4511 to discuss cutting specifications!

FEATURES:

• Stainless steel slice shell and impeller with 10 inch slice shell opening.
  
  
• All food grade USDA sanitary stainless steel construction including spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Factory control box with safety interlock system.
  
  
• 2 HP drive with brake motor.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel GKA dicer is in stock, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular industrial process capacity fruit & vegetable cutting equipment needs.

ALARD item reference #: Y4605

Urschel COMITROL 2100 PROCESSOR MILL,
CUTTING BROCCOLI PUREE
VIDEO DEMO

Broccoli pureeing DEMO VIDEO
Urschel Comitrol 2100 making garlic puree Y4725
from Alard Equipment Corporation.

A reconditioned Urschel COMITROL 2100 PROCESSOR, 60HP, with agitated feed hopper, with feed auger. Refurbished, excellent operational, mechanical, electrical and cosmetic condition.

As of this writing, this Comitrol model 2100 meat grinder is IN stock available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat cutting and grinding equipment needs.

Alard Equipment Corporation item Y4725

Urschel COMITROL 2100 PROCESSOR MILL,
VIDEO DEMO

DEMO VIDEO
Urschel Comitrol 2100 MEAT EMULSIFIER, Y4725
from Alard Equipment Corporation.

A reconditioned Urschel COMITROL 2100 PROCESSOR, 60HP, with agitated feed hopper, with feed auger. Refurbished, excellent operational, mechanical, electrical and cosmetic condition.

As of this writing, this Comitrol model 2100 meat grinder is IN stock available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat cutting and grinding equipment needs.

Alard Equipment Corporation item Y4725

URSCHEL COMITROL PROCESSOR MODEL 1700, 15HP, with CUTTING HEAD.

Y4518 Urschel Comitrol 1700 Processor Mill

Urschel Comitrol 1700 continuous food grade milling machine, manufacturer recommended (with cutting parts specific to application) for particle size reduction of free-flowing products for granulation, slurries, pastes, patees, bakery product reworks, comminuting, granulating, milling, flaking, slicing, liquefying, dispersing, emulsifying, etc...

Manufacturer recommends (with cutting parts specific to application) for peanut butter, chicken slurries, baby food, dehydrated potato flakes, fruit and vegetable pastes, horseradish and dressings, extruded products, textured vegetable protein, biscuits and cookies, nuts, fruit pulp, various spices, corn masa, hard cheeses, and a variety of gels, ointments, and creams.

FEATURES:

• Set up with Urschel Comitrol CUTTING HEAD for which a variety of sizes of cut heads and impellers are available for a wide range of product applications, with cutting dimensions from .010 inch (254mm) up to 1.5 inch cuts from product up to 2.5 inches (63.5mm) in size.
  
  
• We also usually have Comitrol mills in stock with SLICING heads for slice cuts -or- MICROCUT heads for very small particle size cuts -- CALL 315-589-4511 to discuss your specific cutting specifications.
  
  
• 4 inch diameter pipe infeed (can optionally be fitted with a conical feed hopper for hopper feed applications).
  
  
• Food grade USDA sanitary.
  
  
• Stainless steel construction including support frame.
  
  
• Complete oil mist lubrication system.
  
  
• 15 HP drive with brakemotor.
  
  
• Stainless steel electrical control box with SAFETY INTERLOCK system.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this Urschel mill is in stock at ALARD, in EXCELLENT operational, mechanical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and discuss your particular industrial food process particle size reduction needs.

Alard item reference #: Y4518

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter,
test run VIDEO...

Urschel model GA DICER, Y4547 - test run VIDEO
from Alard Equipment Corporation.

A reconditioned Urschel dicer. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions...

• Slice thickness: From 1/8 inch (3.2mm), up to 3/4 inch (19.1mm), (knob adjustable).
  
  
• Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 7/8 inch (22.2mm), (change part).
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• Cuts uniform cubes / dices up to 3/4 inch.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• Casters (locking on drive end) for portability.
  
  
• 2 HP 3 phase drive with stainless steel shrouded motor.
  
  
• 460 volt 3 phase electrical input.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y4547

Urschel Model SL-A MEAT DICER, strip cutter, slicer,
VIDEO DEMO cutting meat cubes, dicing pork & chicken...

VIDEO DEMO
Urschel SL-A DICER cutting meat cubes, Y4563
from Alard Equipment Corporation.

The Urschel SL-A MEAT CUBE CUTTER is manufacturer recommended as designed for continuous operation, uniformly cutting dices, strip cuts or slices of cooked or raw frozen tempered meats, including, but not limited to pepperoni, hard salami, cooked roast beef, ham, pork, mutton, chicken, liver, seafood, fish, pet food, onions, and cabbage.

FEATURES:

• Manufacturer rated for infeed of firm products up to 4 inches (101.6mm) in any dimension.
  
  
• A three-dimensional cutter manufacturer rated for cuts (with appropriate change parts).
  
  
  • Slice knife cuts to 1/2 inch (12.7mm).
    
    
  • Circular knife cuts: 1/8 inch to 2 inches (3.2 to 50.8mm).
    
    
  • Crosscut kife cuts: 1/8 inch to 3 inches (3.2 to 76.2mm).
    
    
  • Many sizes and shapes of cut product can be produced by using some or all of the spindles and adjusting the slice thickness.
    
    
    • Slices can be produced by removing the circular and crosscut knife spindles.
      
      
    • Strip cuts can be made by removing the crosscut knife spindle, whence the length of the strips will depend on the size of the original product.
      
      
    • Note re cutting cubes / dices with all three spindles: This machine makes all three cuts on the cube separately, so the product is not crushed as it wouldl be on certain other types of dicing machinery.
      
      
  • CALL 315-589-4511 to discuss your specific industrial food process cutting application.

• Manufacturer literature rates the throughput capacity of this machine at 2,500 to 5,000 lbs per hour depending on cut size and product being processed.
  
  
• Food grade stainless steel USDA sanitary construction.

As of this writing, this Urschel SL-A meat cube and strip cutting machine is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat processing particle size reduction application.

Alard item reference #: Y4563

Refurbished URSCHEL Model H-A DICER,
cube cutter, strip cutter, slicer.

A three dimensional cutting machine for cubes, dices, and strip cuts, manufacturer rated for product input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, strips and slices, from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, beets, lettuce, cabbage, broccoli, cauliflower, sweet potatoes, squash, carrots, mushrooms, turnips, cantaloupe, endive, tomatoes, cucumbers, horseradish, apples, grapefruit, citrus peel, papaya, pineapple, peaches, celery, rutabagas, melon rind, and may other foods; producing clean, uniform, high-quality tons-per-hour output...

Three cutting dimensions:

• Slice thickness from 1/8 inch (3.2mm) up to 3/4 inch (19.1mm) -- knob adjustable.
  
  
• Circular knives from 1/8 inch (3.2mm) to 3 inch (76mm) -- spacers and number of knives determine.
  
  
• Crosscut knife spindle spacing from 3/4 inch (19.1mm) up to 1.75 inches (44.5mm) -- change part. By removing the crosscut knife spindle and/or the circular knife spindles(s), the Urschel HA dicer can also cut strips cuts (two-dimesnional cuts) such as forFrench fries and slices (single dimension cut).
  
  
• An optional "G" kit is available to extend the range of this machine to overlap with the Urschel model G, and we can otherwise complete this machine with cutting parts to buyer specification -- CALL 315-589-4511 to discuss your particular food process cutting machine need!
  
  

FEATURES:

• Stainless steel product contact surfaces, including slice shell and impeller with 7 inch slice shell opening, cutting spindles and knives.
  
  
• USDA sanitary model designation with food grade stainless steel construction including spindle arms, guards, shrouds and tubular stainless steel frame.
  
  
• Factory control box with safety interlock system.
  
  
• Standard 2 HP 208/230/460 volt 3 phase drive.

As of this writing, this reconditioned Urschel dicer is in stock at ALARD, in EXCELLENT operatonal, mechanical, electrical & cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to shipment.


CALL 315-589-4511 to confirm availability and discuss your particular industrial food process cutting machine needs.

ALARD item reference #: Y4527

URSCHEL DIVERSACUT SPRINT DICER...

A versatile, compact, high-capacity industrial food process cutting machine, dicer, slicer, julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration...

Manufacturer SPECIFICATIONS:

• Slice shell cuts 1/16 inch to 1 inch (1.6mm to 25.4mm) -- knob adjustable.
  
  
• Circular knife cuts 1/8 inch to 3 inches (3.2mm to 76.2mm) -- spindle with knives and spacers.
  
  
• Crosscut knife cuts from 3/32 inch to 1 inch (2.4mm to 25.4mm) -- change part.
  
  
• Maximum product infeed size of 6.5 inch (165 mm) in any dimension.
  
  
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips. Works as a one-dimensional slicer, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• This cutter is manufacturer recommended for a wide range of fruit, vegetable and meat cutting applications, including flat or crinkle cut French fries, ham, salmon, strawberries, carrots, tomatoes, green peppers, and many more food items.

FEATURES:

• 18 inch long by 16 inch wide top hopper extension over a 14.75 inch long by 15.5 inch bottom hopper feeding to the slice shell.
  
  
• 9 inch slice shell opening, 14 inch diameter CRINKLE slice shell cutting chamber.
  
  
• 20 inch long by 10 inch wide discharge chute.
  
  
• On tubular stainless steel support stand with locking casters, at a 77 inch infeed height, 33 inch discharge height.
  
  
• Food grade USDA sanitary stainless steel construction with hinged access panels for ease of sanitation and maintenance.
  
  
• Factory electrical control panel with safety interlock system.
  
  
• 1.5 HP 208/230 volt 3 phase stainless steel shrouded motor drive.

As of this writing, this Urschel Sprint DICER is in stock at Alard, ready-to-go in LIKE NEW operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4606

URSCHEL DIVERSACUT SPRINT DICER...

A versatile, compact, high-capacity industrial food process cutting machine, dicer, slicer, julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration...

Manufacturer SPECIFICATIONS:

• Slice shell cuts 1/16 inch to 1 inch (1.6mm to 25.4mm) -- knob adjustable.
  
  
• Circular knife cuts 1/8 inch to 3 inches (3.2mm to 76.2mm) -- spindle with knives and spacers.
  
  
• Crosscut knife cuts from 3/32 inch to 1 inch (2.4mm to 25.4mm) -- change part.
  
  
• Maximum product infeed size of 6.5 inch (165 mm) in any dimension.
  
  
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips. Works as a one-dimensional slicer, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• This cutter is manufacturer recommended for a wide range of fruit, vegetable and meat cutting applications, including flat or crinkle cut French fries, ham, salmon, strawberries, carrots, tomatoes, green peppers, and many more food items.
  
  

FEATURES:

• 17 inch long by 16 inch wide top hopper extension feeding to the slice shell.
  
  
• 9 inch slice shell opening, 14 inch diameter CRINKLE slice shell cutting chamber.
  
  
• 20 inch long by 10 inch wide discharge chute.
  
  
• On tubular stainless steel support stand with locking casters, at a 55 inch infeed height and 10 inch discharge height..
  
  
• Food grade USDA sanitary stainless steel construction with hinged access panels for ease of sanitation and maintenance.
  
  
• Factory electrical control panel with safety interlock system.
  
  
• 1.5 HP 208/230 volt 3 phase stainless steel shrouded motor drive.

As of this writing, this Urschel Sprint DICER is in stock at Alard, ready-to-go in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4573

URSCHEL COMITROL PROCESSOR
model 3640 Slant, 40HP...

VIDEO DEMO
Urschel Comitrol Processor model 3640S, Alard item Y4289
from Alard Equipment Corporation.

A compact Comitrol mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.

FEATURES:

• Tapered hopper infeed 8.5 inches front-to-back by 12 inches wide and 18 inches deep.
  
  
• Existing 3 inch cutting head with Diocut impeller included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.
  
  
• Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
  
  
• Continuous operation for uninterrupted production.
  
  
• Designed for easy cleanup and operation.
  
  
• Food grade sanitary stainless steel product contact surfaces and support frame construction.
  
  
• Gasketed stainless steel electrical and operator control boxes, with safety interlock system.
  
  
• 40 HP with variable speed brakemotor drive controller with 460 volt 3 phase electrical input.

As of this writing, this Urschel Comitrol 3640 milling machine is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food processing milling and cutting equipment needs.

Alard item reference #:Y4289

STEP FEEDER with INCREMENT CUTTER,
all stainless steel...

DEMO VIDEO
Grove Dale FlightFeeder step-feeder-aligner-length cutter Y4316
from Alard Equipment Corporation.

A Grove Dale Corporation FliteFeeder elongated-product aligner with powered circular-knife length-cutter, is designed to supply a consistent flow of product spread across the width of the steps for cutting elongated vegetables such as carrots, celery, zucchini, etc. into set lengths / increments. With each stroke the feeder automatically shuffles & indexes food product into perpendicular-to-flow alignment prior to being precision fed into the increment cutter knives...

FEATURES:

• 55 inch wide by 6 foor long bed.
  
  
• 1.75 inch deep steps with 7.5 inch vertical push.
  
  
• 30 inch infeed height, 49 inch high discharge.
  
  
• Increment cutter is currently set with 1.5 inch spacing and 10 inch diameter circular blades.
  
  
• Stainless steel side-safety-shrouds.
  
• All food grade sanitary stainless steel.
  
  
• 1.5 HP stainless steel drive motor.
  
  
• Similar to a Magnuson Shufflo cutter, this GDC "Flight-Feeder" aligner-feeder-cutter, is frequently used in conjuction with the Grove Dale TROUGH BELT speed-up belt-feeder (not included but available separately as of this writing, call 315-589-4511 to confirm current availability). The combination aligner-feeder with V-belt takeaway is in turn commonly used to feed downstream equipment, such as an URSCHEL VSC segment cutter (not included but available separately as of this writing, call 315-589-4511 to confirm current availability) for wedge, spear, stick, strip, or slab cuts,, or an Urschel OV slicer (not included but available separately as of this writing, call 315-589-4511 to confirm current availability) for fine coin cuts.

As of this writing, this Shufflo-style feeder is in stock at ALARD, in process in our shop being serviced to EXCELLENT operational, mechanical & electrical condition, is close to completion and available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your food aligner-feeder needs.

ALARD item reference #: Y4316

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter...

A almost-reconditioned Urschel dicer in process in our shop. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions...

• Slice thickness: From 1/8 inch (3.2mm), up to 3/4 inch (19.1mm), (knob adjustable).
  
  
• Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 7/8 inch (22.2mm), (change part).
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• Cuts uniform cubes / dices up to 3/4 inch.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• USDA food grade sanitary model, with stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• Casters (locking on drive end) for portability.
  
  
• 2HP 3 phase drive with stainless steel shrouded motor.
  
  
• 460 volt 3 phase electrical input.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y4547

URSCHEL MODEL M DICER...

A two-dimensional vegetable and meat cutter designed for dicing, strip cutting, or shredding a variety of products through a wide range of sizes. This versatile dicing machine, strip-cutter, and shredder is ideally suited for cutting beef, pork, poultry or fish through a wide temperature range from fresh chilled to hot cooked. Also manufacturer recommended as a leafy greens chopper for collard greens, kale, leeks, mustard greens, and spinach. This versatile machine is also recommended for cutting other food products into strips or squares including fruit leathers, flat breads, tortillas, pita chips, brownies, and croutons. This is a high-volume cutting machine that operates continuously at high production capacities, and is designed for easy cleanup and maintenance.

Manufacturer SPECIFICATIONS:

• Infeed thickness of up to 1 inch (25.4mm).
  
  
• Circular knife cuts from 3/16 to 1.5 inches (4.8mm to 38mm).
  
  
• Crosscut knife cuts from 1/8 inch to 3 inches (3.2mm to 76.2mm).
  
  
• STRIP CUTS can be made by removing the crosscut knife spindle. The length and thickness of the strips will depend on the size of the original product.
  
  
• SHREDS - many types available for applications such as cooked pork, cooked beef, or cooked chicken, in medium, long or fine shreds.

FEATURES:

• This machine comes with 3/8 inch feed drum and 1/4 inch crosscut spondle.Other cutting parts are available from the manufacturer: --CALL 315-589-4511 to discuss your particular cutting specifications.
  
  
• 10 inch wide feed belt.
  
  
• Includes factory stainless steel operator control panel with safety interlock system.
  
  
• USDA food grade construction, including stainless steel cutting spindles, tubular support frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 5HP 208 / 230 / 460 volt 3 phase drive motor.
  
  

As of this writing, this Urschel M DICER is having finishing touches applied in our shop from being newly refurbished, and is available in EXCELLENT operational, mechanical, electrical, and cosmetic condition, available for practically immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food processing cutting equipment needs.

Alard item reference #:Y4612

Urschel Model SL-A MEAT DICER,
strip cutter, slicer...

VIDEO DEMO
Urschel SL-A meat strip-cutter, cube-cutter, dicer, Y4563
from Alard Equipment Corporation.

The Urschel SL-A MEAT CUBE CUTTER is manufacturer recommended as designed for continuous operation, uniformly cutting dices, strip cuts or slices of cooked or raw frozen tempered meats, including, but not limited to pepperoni, hard salami, cooked roast beef, ham, pork, mutton, chicken, liver, seafood, fish, pet food, onions, and cabbage.

FEATURES:

• Manufacturer rated for infeed of firm products up to 4 inches (101.6mm) in any dimension.
  
  
• A three-dimensional cutter manufacturer rated for cuts (with appropriate change parts).
  
  
  • Slice knife cuts to 1/2 inch (12.7mm).
    
    
  • Circular knife cuts: 1/8 inch to 2 inches (3.2 to 50.8mm).
    
    
  • Crosscut kife cuts: 1/8 inch to 3 inches (3.2 to 76.2mm).
    
    
  • Many sizes and shapes of cut product can be produced by using some or all of the spindles and adjusting the slice thickness.
    
    
    • Slices can be produced by removing the circular and crosscut knife spindles.
      
      
    • Strip cuts can be made by removing the crosscut knife spindle, whence the length of the strips will depend on the size of the original product.
      
      
    • Note re cutting cubes / dices with all three spindles: This machine makes all three cuts on the cube separately, so the product is not crushed as it wouldl be on certain other types of dicing machinery.
      
      
  • CALL 315-589-4511 to discuss your specific industrial food process cutting application.
    
    
  • Manufacturer literature rates the throughput capacity of this machine at 2,500 to 5,000 lbs per hour depending on cut size and product being processed.
    
    
• Food grade stainless steel USDA sanitary construction.
  
  

As of this writing, this Urschel SL-A meat cube and strip cutting machine is in stock at Alard, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial meat processing particle size reduction application.

Alard item reference #: Y4563

Urschel
COMITROL PROCESSOR Model 1700,
15HP, with slicing head...

The Urschel Comitrol 1700 continuous food grade milling machine is manufacturer recommended (with cutting parts specific to applciaiton) for particle size reduction of free-flowing products for fruit & vegetable purees, slurries, pastes, pate, mustard, peanut butter, ketchup, baby food, horseradish, dressings, textured vegetable protein, gels, ointments, creams, liquefying, dispersing, emulsifying, etc.

FEATURES:

• Cone hopper infeed, with safety grid in hopper.
  
  
• Set with 30 paddle impeller and 11 blade adjustable SLICE head.
  
  
• Manufacturer literature indicates the adjustable slicing head cuts a range from .02 inch inch (.5mm) to .060 inch (1.5mm).
  
  
• Per manufacturer literature, maximum product input size is determined by the type of cutting head, the impeller used, and spacing within the head, but maximum input size for the slicing head configuration is 3/8 inch (9.5mm) in any dimension.
  
  
• A wide selection of slice heads, impellers, and other change parts are available for this machine to accommodate a variety of products and cuts. CALL 315-589-4511 do discuss your particular food process particle size reduction application.
  
  
• Grease bearings for smooth operation of high-speed cutting head.
  
  
• Continuous operation for uninterrupted production.
  
  
• Simplified design for ease of cleaning and maintenance.
  
  
• Gasketed PVC electrical control with safety interlock system.
  
  
• Food grade sanitary stainless steel construction including support frame.
  
  
• 15HP drive with brakemotor.
  
  
• 230 volt 3 phase electrical input to control panel.

As of this writing, this Urschel mill is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and discuss your food process cutting, slicing, and milling machine needs.

ALARD item reference #: Y3873

Urschel Comitrol Processor Model 1700, 30HP,
with 3-inch CUTTING HEAD.

DEMO VIDEO
Urschel Comitrol 1700 30HP cutting cream corn
from Alard Equipment Corporation.

Urschel Comitrol 1700 continuous food grade milling machine, manufacturer recommended (with cutting parts specific to application) for particle size reduction of free-flowing products for granulation, slurries, pastes, patees, bakery product reworks, comminuting, granulating, milling, flaking, slicing, liquefying, dispersing, emulsifying, etc...

Manufacturer recommends (with cutting parts specific to application) for peanut butter, chicken slurries, baby food, dehydrated potato flakes, fruit and vegetable pastes, horseradish and dressings, extruded products, textured vegetable protein, biscuits and cookies, nuts, fruit pulp, various spices, corn masa, hard cheeses, and a variety of gels, ointments, and creams.

FEATURES:

• Set up for Urschel Comitrol CUTTING HEAD for which a variety of sizes of cut heads and impellers are available for a wide range of product applications, with cutting dimensions from .010 inch (254mm) up to 1.5 inch cuts from product up to 2.5 inches (63.5mm) in size. We also have Comitrol mills in stock with slicing heads for slice cuts, or Microcut heads for very small particle size cuts. CALL 315-589-4511 to discuss your specific cutting specifications.
  
  

• Cone hopper infeed (can optionally be fitted with a pipe feed for pump-fed applications) with safety grid.
  
  

• Food grade USDA sanitary.
  
  

• Stainless steel construction including support frame.
  
  

• Complete with oil mist lubrication system.
  
  

• 30 HP 3-phase brakemotor drive.
  
  

• Gasketed stainless steel factory electrical control box with safety interlock system (being refurbished, not shown in video).
  
  

• Set for 460 volt 3 phase electrical input.

As of this writing, this Urschel mill is in stock at Alard, in very good operational condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and discuss your particular industrial food process particle size reduction needs.

Alard item reference #: Y4508

URSCHEL DIVERSACUT 2110 DICER,
VIDEO DEMO
cutting squash...

DEMO VIDEO
Urschel Diversacut 2110 cutting acorn squash
from Alard Equipment Corporation.

An Urschel Model 2100 DC dicer is the largest machine in the Diversacut line, specifically designed to accept large infeed products up to 10 inches long, providing similarly long cuts such as for vegetable noodles. A versatile, tons-per-hour industrial food process cutting machine / dicer / slicer / julienne cutter, which uniformly cuts flat or crinkle cut dices, cubes, strips / strip cuts, french fry cuts, vegetable noodle cuts, and slices from a wide variety of food products at high production capacities with speeds dependent on materials, application and machine configuration. This dicer is designed with precise cut tolerances with slice adjustment / lock-down features which allow fine-tuning and ultimate precision...

MANUFACTURER SPECIFICATIONS:

• Slice shell: 1/16 inch to 1 inch (1.6 to 25.4 mm) -- knob adjustable.
  
  
• Circular knife: 1/8 to 3 inch (3.2 to 76.2 mm) -- spindle with knives & spacers.
  
  
• Crosscut knife -- change part:
  
  
  • Flat cut: 3/32 to 1.5 inch (2.4 to 38.1 mm)
    
    
  • Crinkle Cut: 9/32 to .583 inch (7.1 to 1438 mm) with .076 inch depth.
    
    
  • "Deep Crinkle Cut": 3/8 to 1/2 inch (9.5 to 12.7 mm) with either .125 or .145 depth.
    
    
  • V-cuts: 5/16 to 1/2 inch (7.9 to 12.7 mm).
    
    
• Flat or krinkle-cut cutting parts can be used in various combinations for cubes, strip cuts, rectangular cuts, julienne cuts, slices, flat or krinkle-cut french fry strips,. Works as a one-dimensional, two-dimensional or three-dimensional cutter. CALL 315-589-4511 to discuss YOUR particular food process cutting machine requirements.
  
  
• Manufacturer rated for input size up to 10 inches (254mm) in any dimension which reduces need to pre-cut product; --but existing impeller has (8) paddles on 5.5 inch centers, so practical product input dimensions would be 10 inches long by 5 inches in diameter. CALL 315-589-4511 to discuss your particular food process cutting machine requirements.
  
  
• This cutter is manufacturer rated for a wide range of fruit, vegetable, and meat cutting applications, including flat or crinkle cut french fries, ham, fish, breads, cookie/candy granulations, strawberries, carrots, tomatoes, green peppers, ginger, kale, zucchini, sweet potatoes, carrots, plus many more!

FEATURES:

• Came set for 3/8 inch flat slice dices (would require significant change parts for crinkle cuts); -- other cutting parts available from the manufacturer. CALL 315-589-4511 to discuss YOUR food process cutting machine specifications.
  
  
• Standard 10 HP stainless steel shrouded drive motor.
  
  
• Factory stainless steel operator control panel with safety interlock system.
  
  
• All sanitary food grade construction including frame, guards, shrouds, infeed hopper and discharge chute.
  
  
• 230 volt 3 phase electrical input.
  
  

As of this writing, this Urschel Diversacut 2110 dicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability and discuss your particular food process cutting machine requirements.

ALARD item reference #: Y4300

URSCHEL Model RA-A DICER, refurbished.

DEMO VIDEO
Used Urschel RA-A DICER, cutting mozzarella strips, Alard item Y3559
from Alard Equipment Corporation.

A 3-dimensional fine dicing machine for a wide range of dices and strip cuts from a variety of products such as relish, salsa, fruits, vegetables, nuts, cheeses, and processed meats.

FEATURING:

• Maximum product input size 3.5 inches (88.9mm) in any dimension.
  
  
• Three cutting dimensions:
  
  
  • Slice thickness: 1/16 to 3/8 inch 1.6 to 9.5 mm, knob adjustable.
    
    
  • Circular knife cuts: 1/8 to 1 inch / 3.2 to 25.4 mm, knives & spacers.
    
    
  • Crosscut knife cuts: .05 to 3 inch / 1.3 to 76.2 mm, change part.
    
    
  • CALL 315-589-4511 to tell us YOUR cutting specification!
    
    

• All food grade USDA sanitary stainless steel construction.
  
  

• Factory control panel with safety interlock system.
  
  
• 5HP 208 / 230 / 460 volt 3 phase drive motor.

As of this writing, this reconditioned Urschel RA-A dicer is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, ready to go and available for immediate shipment.

CALL 315-589-4511 to confirm availability, and to discuss your high-capacity food process cutting machine need.

Alard item reference #: Y3559

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter...

A reconditioned Urschel dicer. The Urschel model G-A is a three-dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

SPECIFICATIONS / three cutting dimensions...

• Slice thickness: From 1/8 inch (3.2mm), up to 3/4 inch (19.1mm), (knob adjustable).

  
  
• Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
  
  

• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 7/8 inch (22.2mm), (change part).
  
  

• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• Cuts uniform cubes / dices up to 3/4 inch.
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 10 inch diameter slice shell opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• 6 inch high casters, set for 41 inch infeed height, and 31 inch discharge height.
  
  
• Stainless steel factory control box with safety interlock system.
  
  
• 2 HP 3 phase drive with stainless steel shrouded motor.
  
  
• 208 / 230 volt 3 phase electrical system.

As of this writing, this reconditioned Urschel dicer is in stock, in EXCELLENT operational, mechanical, electrical and cosmetic condition, available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food cutting machine / equipment needs.

Alard item reference #: Y4411

URSCHEL MODEL GRL
FRENCH FRY CUTTER / STRIP CUTTER...

Designed specifically for strip cutting plain and crinkle cut potato strips / french fries for longer cuts with greatly reduced fines.

FEATURES:

• Manufacturer rates for potatoes up to 9 inches (230 mm) in length.
  
  
• A two-dimensional cutter:
  
  
  • Slice thickness knob adjustable up to 9/16 inch (14.3mm).
    
    
  • Currently equipped with a 3/8 inch (9.525 mm) crosscut knife spindle. Other cross cut spindles are available; --CALL ALARD at 315-589-4511 for current availability, and to dicuss your particular cutting specifications.
    
    
• Aftermarket electrical control panel with safety interlock system, which cuts power to the machine if safety guards are removed.
  
  
• Low maintanence, only two moving parts.
  
  
• Stainless steel frame and shrouding.
  
  
• New, dimpled surface, infeed chute.
  
  
• "Urschalloy" slice shell and impeller.
  
  
• 2 HP 3 phase drive.

As of this writing, this Urschel GRL potato strip cutting machine is in stock at Alard, in good operational condition, available for timely shipment.

CALL ALARD 315-589-4511 for current availability, and to discuss your particular industrial food process high-capacity fruit and vegetable cutting machine needs.

Alard item reference Y3479

Reconditioned URSCHEL Model CC-D
SLICER / SHREDDER / STRIP CUTTER / GRANULATOR...

The Urschel CC-D is manufacturer recommended to shred, slice, strip cut or granulate a multitude of food products ranging from cheese, potatoes, coconut, cranberries, cooked meats, pet food and surimi. A range of cutting head setups are available for this machine with over a dozen different types of cuts, including flat cuts, "V" slices, "Flat-V" shreds & slices, crinkle cut potato chips, match-stick cuts, strip cuts, full shreds, V-shreds, oval shreds, crescent shreds, wide crescent shreds, and various options for grating, on input of up to 3.5 inches (88.9 mm) in any dimension...

FEATURING:

• Stainless steel slice shell, impeller and 18 inch diameter cone hopper.
  
  
• Tubular support frame, with 5 inch locking casters, provides 66 inch high infeed and 39.5 inch discharge height, e.g. for cutting over a bin, tote or tank.
  
  
• USDA / DAIRY sanitary food grade stainless steel construction.
  
  
• Currently set with 3/4 inch "flat strip" cutting head -- other cutting setups available, please CALL 315-589-4511 with your cutting specification!
  
  
• Complete with 5HP belt drive motor, PVC control box and safety interlocks.
  
  
• 208/230 volt 3 phase electrical input.

As of this writing, this refurbished Urschel slicer is in stock at ALARD, in EXCELLENT operational, mechanical, electrical & cosmetic condition, available for immediate shipment.

CALL 315-589-4511 to confirm availability and to discuss your food processing needs.

ALARD item reference #: Y4363

URSCHEL TRANSLICER, Model TRS-2000...

DEMO VIDEO
Urschel Translicer 2000 SLICER Y4344
from Alard Equipment Corporation.

The Urschel Translicer 2000 SLICING MACHINE is manufacturer recommended for flat slices, wavy / crinkle slices, oval shreds and julienne cuts of firm vegetables, fruits and meats up to 4 inches in diameter, and leafy (compressible) vegetables up to 6 inches in diameter; especially recommended for elongated products such as pickles, peppers, celery,carrots, leeks, green onions, asparagus, zucchini, pepperoni, wieners, plantains, bread sticks, cassava, chicken tenders, and many other products.

FEATURES:

• V-shaped feed belt, helps orient products for clean, straight cuts.
  
  
• Manufacturer offers parts for...
  
  
  • Flat Slices: 1/32 to 2" (.8 to 50.8 mm) Crinkle Slices: 1/32 to 2" (.8 to 50.8 mm) in thickness with 4-2/3 waves per inch and with a crinkle depth of 1/16" (1.6 mm).
    
    
  • Microslice wheels for Microslice wheels for .030 to .240" (.8 to 6 mm) Crinkle Slices: .069" (1.8 mm) thickness with 3-1/3 waves per inch and with a crinkle depth of .080" (2.0 mm) Oval Shred: This shred has an oval-shaped cross section measuring approximately .125" (3.2 mm) thick by .250" (6.4 mm) wide. Julienne Strips: A wide range of julienne strips can be made from firm products.
    
    
  • Julienne Wheels: Julienne cuts ranging from 1/2 x 1/2" (12.7 x 12.7 mm) to 2 x 2" (50.8 x 50.8 mm) are produced by using julienne knives on the slicing wheel.
    
    
  • Note: Some special cutting setups may cost more.
    
    
  • CALL 315-589-4511 to discuss your particular food process cutting specification.
    
    
  • 29 inch infeed height to the base of the "V". 35 inch infeed height to feed from the side; 8 inch discharge height; --leg extensions available to buyer specification. CALL 315-589-4511 to discuss your particular food process cutting machine specifications.
    
    
• Standard spring-loaded hold-down assembly.
  
  
• This Urschel cutter comes complete with stainless steel (factory) operator control panel with Urschel interlock safety system, controlling the two drives (3HP cutting head drive, with 1.5HP feed belt drive), each with variable speed controls.
  
  

As of this writing, this Translicer 2000 Urschel slicer has just arrived into stock at Alard, and is available for timely service and shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular industrial food process cutting equipment needs.

Alard item reference: #:Y4344

URSCHEL Model J9-A DICER /
STRIP CUTTER / GREENS CHOPPER...

A reconditioned Urschel J9-A two-dimensional belt-fed cutter, manufacturer rated for firm products up to 1/2 inch thick, with included feed roll, or thicker if product is compressible. This dicing machine / strip-cutter, chopping machine produces a variety of dices and strips. Manufacturer literature recommends for meats (frozen tempered chicken breast, beef jerky, bacon strips, sausage crumbles), baked goods (pita chips, flour tortilla strips. bread dices for croutons, brownies) & vegetables such as peppers, celery, broccoli, and parsley; and as a high-capacity greens chopper for mustard greens, collard greens, kale, and spinach.

The Urschel J9A is a high-capacity tons-per-hour cutting machine designed for very clean, precise cuts, in uninterrupted continuous operation in industrial food processing applications; including USDA meat and poultry applications, with easy cleanup and maintenance,

This machine FEATURES:

• 9 inch wide product in-feed belt.
  
  
• Currently complete except for cutting parts to be prepared and installed per buyer requirement: CALL 315-589-4511 to discuss your cutting specifications!
  
  
  • Circular knives can be configured from cuts for 3/16 inch to 2 inches (4.8mm to 50.8mm).
  • Crosscut spindles are available for cuts from 1/16 inch to 3 inches.
    
    
• Food grade USDA sanitary steel construction; including frame, guards, shrouds & cutting spindles.
  
  
• Complete with factory electrical panel with operator controls & safety interlock system.
  
  
• 5 HP 208/230/460 volt 3 phase Sterns brake-motor drive.

As of this writing this Urschel cube cutter / strip cutter is in stock at ALARD, in EXCELLENT operational, mechanical, and electrical condition, needing only change parts per your specification installed prior to shipment.

CALL 315-589-4511 to confirm availability and to discuss your particular industrial food process cutting machine need.

ALARD item reference #: Y4308

URSCHEL Model G-A DICER,
strip cutter, slicer, French fry cutter...

A three dimensional continuous cutting machine, manufacturer rated for products input sized up to 5.5 inches (140mm) in any dimension. Manufacturer recommends for uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables, such as potatoes, apples, broccoli stems, citrus peel, papaya, peaches, celery, carrots, and many others; producing clean, uniform, high-quality tons-per-our output.

Three cutting dimensions...

• Slice thickness: From 1/8 inch / 3.2mm, up to 5/8 inch / 16mm, (knob adjustable).
  
  
• Circular knifes: from 1/8 inch (3.2mm) to 3 inches (76mm); (spacers and number of knives determine).
  
  
• Crosscut knife spindle spacing: from 9/32 inch (7.1mm) up to 3 inches, (change part).
  
  
• By removing the crosscut knife spindle and / or the circular knife spindle(s), the Urschel G series cutter can also cut strip cuts (two-dimensional cuts) such as for french fries, and slices (single dimensional cut).
  
  
• We can complete this machine with cutting parts to fit most standard cutting specifications: Please call 315-589-4511 to tell us your cut size requirement!

This cutting machine FEATURES...

• Stainless steel slice shell and impeller with 7 inch opening.
  
  
• Food grade sanitary stainless steel product contacts, spindles, guards, shrouds and tubular stainless steel frame.
  
  
• Aftermarket PVC control box with safety interlock system.
  
  
• Standard 2 HP 3 phase drive.

As of this writing, this Urschel dicer is in stock at Alard in EXCELLENT operational, mechanical, electrical and cosmetic condition, needing only to be fitted with cutting parts to buyer specification prior to shipment.

CALL 315-589-4511 to confirm availability, and to discuss your industrial volume food process cutting specification.

Alard item reference #: Y4097

Urschel Comotrol PROCESSOR Slant model 3640, 40HP....

A compact Comitrol mill for small volume to high capacity production operations. Widely used for rework of gelatin capsules, biscuits, candy, noodles and a full spectrum of bakery goods. Also manufacturer recommended for reducing meats, fish, textured vegetable protein, fruits, vegetables, spices, seaweed, cheeses, chemical and pharmaceutical applications.

FEATURES:

• Existing 3 inch cutting head with Diocut impeller included, manufacturer offers a wide range of cutting heads and impellers for particle sizes ranging from coarse to fine emulsions /powders / granules. CALL 315-589-4511 to discuss your cutting specification.
  
  
• Cutting chamber / cutting head mounted at a slanted angle to facilitate product in-feed.
  
  
• Continuous operation for uninterrupted production.
  
  
• Designed for easy cleanup and operation.
  
  
• Food grade sanitary stainless steel product contact surfaces and support frame construction.
  
  
• Gasketed stainless steel electrical and operator control boxes, with safety interlock system.
  
  
• 40 HP with variable speed brakemotor drive controller with 460 volt 3 phase electrical input.

As of this writing, this Urschel Comitrol 3640 milling machine has just arrived in in stock at Alard missing an infeed hopper, but is otherwise in VERY good condition and available for timely shipment.

CALL 315-589-4511 to confirm availability, and to discuss your particular food processing milling and cutting equipment needs.

Alard item reference #:Y4289