A running list of things we've acquired or found available for sale by Alard Equipment Corporation; used food processing and packaging equipment.

Alard Equipment Corporation, 6483 Lake Avenue, Williamson, New York 14589, 315-589-4511 (phone), 315-589-3871 (fax)

See our full General Listings page

February 2014 Archives

y1946

y1946a_email.jpgFORTRESS "PHANTOM" STAINLESS STEEL DROP THRU DIGITAL METAL DETECTOR with rectangular aperture 5 inches long by 14 inches wide with interference-resistant inlet and outlet flanges. 18 inch vertical fall / drop from flange to flange.

Came with an anti-static plastic drop-chute 13 inches cutout chute on top, 19" from flange to discharge end, which you can use or replace as your needs dictate.

Complete with integral digital operator control panel, with hinged plexiglass protective door, and alarm reject buzzer.

As of this writing, this gravity fall metal detector is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y1946

y2007

y2007k_email.jpg100 GALLON SELF-CONTAINED GAS-FIRED T316 STAINLESS STEEL KETTLE with SWEEP AGITATOR.

Cleveland Model KLG-100, gas-burner-heated kettle, manufacturer tagged and National Board coded for 50psi @ 298 degrees Fahrenheit, and 190,000 BTUs, presently set for natural gas. 35 inch diameter by 29.5 inch deep hemispherical bottom T316 stainless steel vessel with 1.5 inch diameter bottom side outlet. Includes Tri-clamp connection with 2" manual valve on the outlet, and two-piece covers over the vessel.

Hockmeyer Model 9TA3/3477A sweep agitator with 2HP 3 phase drive, mounted on a painted steel bridge with support legs and painted steel base plate. 47 inch infeed height, 13 inch discharge height.

Late model, New 2007.

As of this writing, this gas heated cooking kettle with agitator is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y2007

y2006

y2006m_email.jpg100 GALLON SELF-CONTAINED GAS-FIRED T316 STAINLESS STEEL KETTLE with SWEEP AGITATOR.

Cleveland Model KLG-100, gas-burner-heated kettle, manufacturer tagged and National Board coded for 50psi @ 298 degrees Fahrenheit, and 190,000 BTUs, presently set for natural gas. 35 inch diameter by 29.5 inch deep hemispherical bottom T316 stainless steel vessel with 1.5 inch diameter bottom side outlet. Includes Tri-clamp connection with 2" manual valve on the outlet, and two-piece covers over the vessel.

y2006p_email.jpgHockmeyer Model 9TA3/3477A sweep agitator with 2HP 3 phase drive, mounted on a painted steel bridge with support legs and painted steel base plate. 47 inch infeed height, 13 inch discharge height.

Late model, New 2007.

As of this writing, this gas heated cooking kettle with agitator is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y2006

y1856

y1856c_email.jpg150 GALLON STEAM JACKETED KETTLE with single-motion SCRAPER AGITATOR, all stainiless steel.

Cleveland Range / J.C. Pardo 42 inch diameter by 32 inch deep hemispherical bottom stainless steel vessel with 3" center bottom outlet with Tri-clamp fitting. Stainless steel steam jacket manufacturer tagged, National Board coded and U-stamped for 70psi working steam pressure.

Single motion hydraulic powered scrape surface agitation; stainless steel agitator with plastic scrapers, with hydraulic drive (hydralic pump not included unless otherwise noted). Offset inner baffle descending from stainless steel agitator bridge with (2) 2" diameter Tri-clamp inlet ports.

63 inch infeed height, 29 inch discharge height on (4) stainless steel legs. With top stainless steel drive cover in place, this cooking kettle has an 88" overall height.

The steam jacket has been hydrostatically pressure tested good, and as of this writing, this single motion kettle is in stock at Alard in very good condition, available for immediate shipment as configured.

Alard item reference #:Y1856

y2103

y2103a_crop_email.jpgHydrosieve screen stainless steel WASTEWATER RECOVERY SCREEN.

Alardsieve Model 4250 water reclaim screen with 42 inch wide (side to side) by 50 inch long (top to bottom) open screen area, with .040 inch sieve openings in it's tri-rod / wedge-wire screen, allowing for throughput capacity of up to 980 gallons per minute.

At the back of the cabinet is a threaded 4 inch diameter inlet feeding to the 21 inch long (back to front overflow partition) by 42 inches wide, by 33 inches deep (overflow edge to bottom) tapered infeed tank / head tank. Once fed into the head tank, water then flows over a 5 inch long (top to bottom) dead plate, and then onto the open screen. Water goes through the screen while solids that cannot pass through, drop down the screen and over the 1.25 inch bottom edge solids discharge lip.

At the top, a hinged (for cleaning) 16 inch long (top to bottom) splash plate is mounted over the screen which catches any over-spill and directs it back down the screen in a laminar flow.

Water passing through the screen is collected in a water reclaim tank with a 12.5 inch diameter flanged back-of-cabinet discharge outlet. The cabinet has access ports at each side to reach behind the screen for cleaning, and each tank(head tank and recovery tank) has a 1.25 inch diameter threaded female cleanout port at the very bottom edge of the tank.

All food grade type 304 stainless steel construction. Easy to clean and maintain static screen, no moving parts.

63 inch infeed height, 10 inch solids discharge height, and 4 inch recovered water discharge height. Overall dimensions of 51 inches overall length by 44.5 inches overall width by 63" overall height. All the aforementioned dimensions are withOUT any stand; --in most applications, this hydrosieve type water recovery screener would be positioned on a site-specific (not included) platform or stand to allow the solids to discharge into tote, bin, dumpster, or other receiver (possibly a screw press).

As of this writing, this hydro-sieve type screen is in stock NEW at Alard, fully assembled, ready to go and available for immediate shipment.

Alard item reference #:Y2103

y1924

y1924b_crop_email.jpgCONVEYORIZED METAL DETECTOR for food processing metal detection, digital, washdown.

Consists of a reconditioned SAFELINE metal detector with a 6 inch high by 14 inch wide usable aperture opening in a washdown sealed aluminum enclosure digital operator controls, mounted on a NEW all stainless stee lbelt transfer CONVEYOR.

The newly-fabricated through-conveyor has a 10.75 inch wide by 60 inch long interlocking plastic chain type belt, with a tubular stainless steel conveyor frame, belt stop alarm reject system, and a 110 volt single phase (standard
household current) powered washdown drive. 33 inch working height on adjustable foot pads.

As of this writing, this refurbished food process metal detector with NEW conveyor configuration is in stock at Alard, in EXCELLENT operational, electrical, mechanical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y1924

y2111

y2111b_email.jpgRECONDITIONED URSCHEL Model G-K DICER, with stainless steel slice shell and impeller.

Capable of all the same flat dice and flat strip cuts as the Urschel model G-A, but also capable of crinkle dices and crinkle strip cuts e.g. for krinkle cut french fries. Manufacturer rated for infeed product up to 5.5 inches in any dimension, slice thickness of 1/8 inch (3.2mm) to 3/4 inch 19.1mm, crosscuts from 9/32 inch (7.1mm) to 7/8 inch (22.2mm), and circular knife cuts from 3/32 inch (2.4mm) to 3 inches (76.2mm). Please tell your Alard Sales Representative your cutting specification(s).

All food grade sanitary stainless steel product contacts, with plated spindle arms, stainless steel shrouding, frame, knives and cutting spindles. Metallic painted main casting. 7" slice shell opening.

2HP 208/230/460 volt 3 phase drive.

As of this writing, this refurbished Urschel cutter / dicing machine is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y2111

y0892

y0892k_email.jpgRECONDITIONED URSCHEL DICER, model H; all stainless steel.

Urschel H dicing machine with stainless steel slice shell and 7 inch diameter opening. All food grade sanitary stainless steel product contacts, shrouds, frame, and newly plated castings and arms.

A three-dimensional cutter manufacturer rated cutting vegetable and fruit products such as pineapple, tomatoes, lettuce, potatoes, papaya, broccoli, and many others, for infeed product up to 5.5 inches (140mm) in any dimension. This model is specifically intended for producing large dices up to 1 inch, and a variety of strip cuts with a slice thickness, in the following dimensions...

  • Slice thicknesses from 1/8 (3.2mm) inch to 3/4 inch (19.1mm).
  • Crosscut thickness from .75 inch (19.1mm) to 1.75 inch (44.5mm).
  • Circular knife cuts from 1/8 inch (3.2mm) to 3 inch (76.2mm).

We have several spindle / cut setups available, so please specify your cutting (and voltage) requirements.

Complete with 2HP 3 phase 208/230/460 volt drive motor.

As of this writing, this refurbished Urschel dicer is in stock at Alard in EXCELLENT operational, mechanical, electrical, and cosmetic condition, ready to go and available for immediate shipment.

Alard item reference #:Y0892

y2101

y2101b_crop_email.jpgPISTON DEPOSITOR / BAKERY DEPOSITOR - Unifiller Deco-Mate 3, pneumatic powered, with photo eye activation for automatic operation.

A light, portable Unifiller model DM-3 piston transfer pump with a cut-off valve  dischage on a flat brush-shaped discharge spout with 2 3/8" wide by 1/16" long discharge opening), on a 30 inch long hose from the discharge valve, and fixed on a conveyor mounting bracket/frame slotted to fit a conveyor width of at least 30 inches wide.

y2101d_crop_email.jpgFood grade sanitary, all stainless steel, with Tri-clamp connections. Full washdown, tool-free design for quick cleaning and fast product changeover.

Complete with stainless steel operator control panel with controls for on/off, delay (from photo-cell recognition), and duration (fill time at cutoff valve).

Requires 4 cfm 20-80psi pneuatic air input (113 liter/minute at 1.4-5.5 bar).

The manufacturer configures this model as a frosting pump, for decorating cakes, cupcakes, pastries, and other bakery items, but it is equally applicable for dispensing sauces, oil, dressing, cheese sauces, fruit spreads, fruit fillings, jelly, jam, peanut butter, and/or other food process uses appropos of a piston transfer pump or piston filler / depositor.

This particular machine was originally specified for depositing a thin layer of butter on a garlic bread type product, but was never used. We removed this machine from the original, unopened factory crate to take pictures and display in our showroom. It is a brand-new piece!

As of this writing, this NEW Unifiller Decomate is in stock at Alard, in pristine, NEW / unused condition, available for immediate shipment.

Alard item reference #:Y2101*

*AS of this writing we have TWO (Y2100 and Y2101) of these brand new piston transfer depositors in stock; --ask your Alard Sales Rep for current availability.

Z9713

z9713e_email.jpg
REFURBISHED URSCHEL Model G-K DICER, with stainless steel slice shell and impeller.

Capable of all the same flat dice and flat strip cuts as the Urschel model G-A, but also capable of crinkle dices and crinkle strip cuts e.g. for krinkle cut french fries. Manufacturer rated for infeed product up to 5.5 inches in any dimension, slice thickness of 1/8 inch (3.2mm) to 3/4 inch 19.1mm, crosscuts from 9/32  inch (7.1mm) to 7/8 inch (22.2mm), and circular knife cuts from 3/32 inch (2.4mm) to 3 inches (76.2mm). Please tell your Alard Sales Representative your cutting specification(s).

All food grade sanitary stainless steel including plated main castings and spindle arms, stainless steel shrouding, frame, knives and cutting spindles. 7" slice shell opening. 2HP 208/230/460 volt 3 phase drive.

As of this writing, this reconditioned Urschel cutter / dicing machine is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Z9713

y1878

y1878j_crop_email.jpgRECONDITIONED CORNELL FOOD PUMP / HYDRO TRANSFER PUMP, 10 inch diameter inlet / outlet, on stainless steel frame with motor mount.

Cornell Model 10NHPP-F12K cast iron pump, with patented expanded volute (for gentle product handling), with 21 inch diameter stainless steel impeller, 10 inch diameter suction and discharge openeings, with flanged connectors. Manufacturer rated for pumping solids up to 7.25 inch diameter by 12 inches long in water at up to 3,000 gallons per minute.

This water transfer food pump comes mounted on a 56 inch long by 72 inch wide by  26 inch high angle stock stainless steel frame with a slotted motor mount.

Pump curves available on request.

Available as-is (pump and frame only), or we can quote it with a drive sized to buyer specification, and / or an infeed / vortex tank ready to plumb into your flume system.

As of this writing this refurbished 10 inch Cornell Food Pump is in stock at Alard, in EXCELLENT operational, mechanical, and cosmetic condition, available for immediate shipment.

Alard item reference #:Y1878

y1842

y1842a_crop_email.jpgRECONDITIONED URSCHEL Model CC SLICER, with stainless steel slice shell and impeller, stainless steel cone hopper infeed, factory control panel with safety interlock system, stainless steel shrouding and tubular support frame, currently set with "V-cut" head.

Manufacturer rated as a potato chip slicer, as well as for various other food products, such as cheese, nuts, fruit and vegetables such as carrots, cabbage, broccoli, mushrooms, strawberries, etc. A range of of cutting head setups are available for this machine for over a dozen different types of cuts, including flat slices, "V" Slices, "Flat-V" shreds and slices, crinkle cut potato chips, match-stick cuts, strip cuts, full shreds, V-shreds, oval shreds, wide oval shreds, crescent shreds, wide crescent shreds, and various options for grating, on input product up to 3.75 inches in any dimension. Please tell your Alard Sales Representative your cut specification.

Complete with stainless steel shrouded 2HP 208/230/460 volt 3 phase motor.

NOTE: Pictures show optional stainless steel riser stand available at extra cost. The stand raises the Urschel CC slicing machine to a 55 inch infeed height, 29 inch discharge height, and leaves 30 inches wide between the suppurt legs to place a tote or bin to catch cut product.

As of this writing, this refurbished Urschel potato chip slicer is in stock at Alard, in EXCELLENT operational, mechanical, electrical, and cosmetic condition available for immediate shipment.

Alard item reference #: Y1842

About this Archive

This page is an archive of entries from February 2014 listed from newest to oldest.

January 2014 is the previous archive.

March 2014 is the next archive.

Find recent content on the main index or look in the archives to find all content.


JOIN our
no-more-than-monthly

Email list!
Email PRIVACY explanation link!

ALARD EQUIPMENT CORP
6483 Lake Avenue
Williamson, NY  14589
315-589-4511
315-589-3871 (fax)